PowellKids Dixon JYF-7023-VN User manual

Dixon Bunk Bed Black/White
Lit superposable Dixon, noir/Lit superposable Dixon, blanc
Litera Dixon, blanco/ Litera Dixon, negro
#16Y2006B
#16Y2006W
This bed is designed to use only a mattress which is
74"-75" long and 37-1/2" - 38-1/2" wide
Ensure thickness of upper mattress does not exceed
8", lower mattress does not exceed 10" and surface
of mattress is at least 5" below upper edge of
guardrail
Replacement parts, including additional
guardrails, may be obtained from Powell
Company
JYF-7023-VN

We are here to help!
Before you return it - contact us.
We do our best to insure that your furniture arrives in excellent condition. In the event that a part is damaged or missing,
L.Powell will be happy to provide you with replacement parts, at no charge, within 30 days of purchase, providing the parts
are available in our warehouse and the item purchased is part of our current inventory. In order to receive spare parts, at
no charge, you must provide proof of purchase within 30 days.
If you need assistance with assembly or replacement parts, please call L.Powell Customer Service, prior to
returning the item to the store.
·Our office is open Monday – Friday 9am – 5pm, Eastern Standard Time.
·Our toll free customer service number is: 800 - 622 - 4456
·Or visit our web site www.powellcompany.com to order spare parts and for care instructions on your newly
Nous sommes là pour vous aider!
Avant de retourner le produit, veuillez communiquer avec nous.
Nous faisons tout en notre pouvoir pour que vous receviez votre meuble en parfait état. Toutefois, si une pièce est
Nous faisons tout en notre pouvoir pour que vous receviez votre meuble en parfait état. Toutefois, si une pièce est
endommagée ou manquante, L.Powell se fera un plaisir de vous envoyer gratuitement la pièce de rechange, dans
les 30 jours suivant l’achat, à condition que nous ayons la pièce en stock et que le produit acheté fasse partie de
notre inventaire courant. Afin de recevoir gratuitement la pièce de rechange, vous devez fournir une preuve
d’achat dans un délai de 30 jours.
Si vous avez besoin d’une pièce de rechange ou d’aide pour l’assemblage, veuillez communiquer avec le Service à
la clientèle de L.Powell avant de retourner le produit au magasin.
Nos bureaux sont ouverts du lundi au vendredi, de 9 h à 17 h, heure normale de l’Est.
Le numéro sans frais pour joindre notre Service à la clientèle est le 800 - 622 - 4456.
Vous pouvez aussi visiter notre site Web à www.powellcompany.com pour commander des pièces de rechange et
¡Estamos aquí para ayudarle!
Antes de regresar el producto, comuníquese con nosotros.
Hacemos todo lo posible para que su mobiliario se le entregue en excelentes condiciones. En caso de que falte
una pieza o esté dañada, L.Powell le enviará con gusto la pieza de repuesto sin ningún costo dentro de los 30
días posteriores a la compra, siempre y cuando tengamos en existencia las piezas en nuestros almacenes y que
el artículo comprado forme parte de nuestro inventario actual. Para recibir piezas de repuesto, sin costo
adicional, debe enviarnos el comprobante de compra dentro de los 30 días después de la compra.
Si necesita ayuda para ensamblar su producto o para obtener piezas de repuesto, llame al Servicio al Cliente de
L.Powell antes de devolver el artículo a la tienda.
Nuestras oficinas están abiertas de lunes a viernes de las 9.00 a las 17.00 horas, hora del Este.
Número de Servicio al Cliente gratuito: 800
-
622
-
4456.
Número de Servicio al Cliente gratuito: 800
-
622
-
4456.
Para pedir piezas de repuesto y consultar las instrucciones de cuidados de su mueble recién adquirido, visite
nuestro sitio Web www.powellcompany.com.

HARDWARE LIST
1 2
3 4
Φ 6.5mm x 120mm
Φ 4mm x 35mm
JOINT CONNECTOR (4mm HEX HEAD)
16 PCS
WOOD JOINT CONNECTOR (4mm HEX HEAD)
12 PCS
Φ 1/4" x 130mm Φ 6.5mm x 48mm
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
5 6
7 8
9 10
BARREL NUT
16 PCS
WOOD JOINT CONNECTOR (4mm HEX HEAD)
2 PCS
Φ 6.5mm x 80mm
WOOD DOWEL
48 PCS
HEX KEY
1 PC
Φ 11.8mm x 15mm
Φ 10mm x 100mm
Φ 4mm x 30mm
METAL DOWEL
4 PCS
FLAT HEAD SCREW
6 PCS
Φ 10mm x 50mm
WOOD JOINT CONNECTOR (4mm HEX
HEAD) 30 PCS
FLAT HEAD SCREW
28 PCS
Φ 6.5mm x 120mm
Φ 4mm x 35mm
1

HARDWARE LIST
11 12
13 14
Φ 4mm x 60mm
Φ 3.5mm x 19mm
JOINT CONNECTOR (4mm HEX HEAD)
2 PCS
HEX CAP
2 PCS
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
Φ 1/4" x 32mm Φ 9mm x 17mm
FLAT HEAD SCREW
16 PCS
FLAT HEAD SCREW
2 PCS
15
IMPORTANT:
1. Do not tighten bolts completely until all bolts are completely lined up and inserted into holes / nuts.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.
IMPORTANT:
1. Ne serrez pas complètement les boulons jusqu’à ce qu’ils soient bien alignés et insérés dans les trous et les écrous.
2. Ne serrez pas excessivement les boulons pour éviter d’endommager les filets.
3. Veuillez utiliser des outils manuels pour assembler ce produit. Ne pas utiliser d’outils électriques.
IMPORTANTE:
1. No apriete completamente los pernos hasta que estén bien alineados e insertados en los orificios y las tuercas.
Φ 34mm x 29mm
MUSHROOM CAP
4 PCS
16 PCS
2 PCS
2. No apriete exageradamente los pernos para evitar dañar las roscas.
3. Favor de utilizar herramientas manuales para ensamblar este producto. No utilizar herramientas eléctricas.
2

PARTS LIST
A B C
D E F
TOP POST
2 PCS
TOP POST
1 PC
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
TOP POST
1 PC
4 PCS
HEADBOARD TOP CAPBOTTOM POST BOTTOM POST
2 PCS 2 PCS
Q
T
T
U
U
S
H
H
F
F
B
C
F
F
J
K
Q
O
P
3

PARTS LIST
H I J
K L M
TOP BACK SIDE RAILHEADBOARD TOP CROSS
1 PC
TOP FRONT SIDE RAIL
1 PC
BUNK BED ASSEMBLY MANUAL
4 PCS
16Y2006B/W
N O P
Q R S
T U V
14 PCS 2 PCS
SHORT GUARDRAIL POSTGUARDRAIL LEG
4 PCS 2 PCS 1 PC
LONG GUARDRAIL
LADDER STEP
BOTTOM SIDE RAIL
SHORT GUARDRAIL LEFT LADDER END RIGHT LADDER END
SLAT
2 PCS 1 PC
2 PCS
1 PC
2 PCS 2 PCS 2 PCS
TOP HEADBOARD PANEL BOTTOM HEADBOARD PANEL SPACE BLOCK
4

STEP 1
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
H
7
13
13
13
13
13 7
F
7
5

STEP 2
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
38
C
F
T
7
7
7
7
H
B
F
T
7
7
7
7
7
7
H
3
3
3
3
3
3
38
Warning label
This surface is flat
C
2
2
8
F
B
A
C
7
7
3
3
3
A
3
This surface is flat
A
6

STEP 3
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
7
7
7
7
7
7
3
3
38
3
3
This surface is flat
E
H
UH
7
7
38
3
3
F
F
7
3
D
D
E
U
7
7
7
7
3
3
3
This surface is not flat
3
7
7

STEP 4
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
K
D
1
K
1
1
8

STEP 5
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
1
1
1
3
3
9

STEP 6
BUNK BED ASSEMBLY MANUAL
16Y2006B/W
7
7
10
10
8
S
N
11
12
10
S
11
12
10

BUNK BED ASSEMBLY MANUAL
16Y2006B/W
STEP 7
M
6
6
6
R
R
N
J
6
6
6
6
N
I
11

BUNK BED ASSEMBLY MANUAL
16Y2006B/W
STEP 8
K
4
L
K
4
12

BUNK BED ASSEMBLY MANUAL
16Y2006B/W
STEP 9
5
5
A
B
5
5
A
C
13

BUNK BED ASSEMBLY MANUAL
16Y2006B/W
STEP 10
O
P
14

BUNK BED ASSEMBLY MANUAL
16Y2006B/W
STEP 11
IS
14
back view
I
14
14
C
S
15

BUNK BED ASSEMBLY MANUAL
16Y2006B/W
15
15
15
15
With the help of another person, remove the top bunk from the lower bunk.
Note: Switching the headboards will allow the two single beds to be identical (the headboards will
have taller posts and the footboards will have the shorter posts).
Remove the ladder and all the guardrails.
Disassemble the side rails from all headboards (top and lower bunks).
Re-assemble the headboards (with tall posts) and footboards (with short posts) to side rails.
16

BUNK BED ASSEMBLY MANUAL
16Y2006B/W
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result in
instability or cause possible injury.
DO NOT ALLOW CHILDREN UNDER 6
YEARS OF AGE TO USE THE UPPER
BUNK. BED IS DESIGNED FOR
CHILDREN RANGING FROM 6 YEARS
OF AGE TO YOUNG TEENAGERS.
DO NOT ALLOW
HORSEPLAY ON OR UNDER
THE BED AND PROHIBIT
JUMPING ON THE BED.
USE ONLY COIL SPRING
MATTRESSES ON BOTH
THE UPPER AND LOWER
BUNKS. FAILURE TO DO SO
CAN RESULT IN INJURY.
USE ONLY MATTRESSES WHICH ARE 74"-75" LONG AND 37 1/2" - 38 1/2" WIDE
ON UPPER AND ON LOWER BUNKS. ENSURE THICKNESS OF UPPER
MATTRESS DOES NOT EXCEED 8", LOWER MATTRESS DOES NOT EXCEED 10"
That's it! You've finished assembling your bunk bed.
MATTRESS DOES NOT EXCEED 8", LOWER MATTRESS DOES NOT EXCEED 10"
17

6"
Ensure thickness of upper mattress does not exceed 8", lower mattress does not exceed
10" and surface of mattress is at least 5" below upper edge of guardrail