Power It! JD501004 User manual

4V LI-ION CORDLESS SCREWDRIVER
JD501004
Owner’s Manual
PRODUCT SPECIFICATIONS
SCREWDRIVER
Rotation
Right or left
Spindle speed
220 RPM (no load)
Drive
¼" (0.63) hex
Battery
4 V
Weight
13 oz (0.37 kg)
BATTERY CHARGER
Battery voltage
4 V
Charger
3–5 Hour, Class 2
Charger input
100–240V AC, 50–60Hz, 8W
Charger output
6 V DC, 300 mA
Need Assistance?
Call us on our toll free customer support line:
1-866-349-8665 (Monday through Friday 9am –5pm
Eastern Time)
Technical questions
Replacement parts
Parts missing from package

2
Product specifications ………….…………………………………………………….
1
Table of contents ……………………………………………………………………...
2
General safety warnings ……………………………………………………………..
3–4
Eye, ear & lung protection ……………………………………………………………
3–4
Electrical safety ……………………………………………………………………….
4
Power tool safety ……………………………………………………………………...
5–6
General safety rules …………………………………………………………………..
5
Work area ………………………………………………………………….…………..
5
Electrical safety ……………………………………………………………………….
5
Personal safety ………………………………………………………………………..
5–6
Power tool use and care.……………………………………………………………..
6
Service …………………………………………………………………………………
6
Specific safety rules …………………………………………………………………..
7
Battery & charger safety ……………………………………………….…………….
8
Battery pack recycling ………………………………………………………………..
8
Symbols ………………………………………………………………………………..
9
Know your screwdriver ……………………………………………………………....
10
Assembly and operating ……………………………………………………………..
11–13
Charging the battery ………………………………………………………………….
11
Installing screwdriver bits …………………………………………………………….
11
Right/left switch ……………………………………………………………………….
12
Preparing screw holes ……………………………………………………………….
12
Lithium-ion battery performance ……………………………………………………
13
Driving screws ………………………………………………………………………..
13–14
Maintenance …………………………………………………………………………..
14–15
Exploded view …………………………………………………………………………
16
Parts list ………………………………………………………………………………..
17
Warranty ……………………………………………………………………….………
18
TABLE OF CONTENTS

3
EYE, EAR & LUNG PROTECTION
This instruction manual includes the following:
General Safety Rules
Specific Safety Rules and Symbols
Functional Description
Assembly
Operation
Maintenance
Accessories
!
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA
REQUIREMENTS or ANSI SAFETY STANDARD Z87.1
FLYING DEBRIS can cause permanent eye damage. Prescription
eyeglasses ARE NOT a replacement for proper eye protection.
WARNING: Non-compliant eyewear can cause serious injury if
broken during the operation of a power tool.
SAVE THESE INSTRUCTIONS FOR REFERENCE
WARNING: Use hearing protection, particularly during extended
periods of operation of the tool, or if the operation is noisy.
!
GENERAL SAFETY WARNINGS
WARNING: Before using this tool or any of its accessories, read this
manual and follow all Safety Rules and Operating Instructions. The important
precautions, safeguards and instructions appearing in this manual are not
meant to cover all possible situations. It must be understood that common
sense and caution are factors which cannot be built into the product.
!

4
ELECTRICAL SAFETY
WARNING: To avoid electrical hazards, fire hazards or damage to the
tool, use proper circuit protection.
This tool is wired at the factory for 120V AC operation. It must be connected
to a 120V AC, 15 A circuit that is protected by a time-delayed fuse or circuit
breaker. To avoid shock or fire, replace power cord immediately if it is worn,
cut or damaged in any way.
GENERAL SAFETY WARNINGS
WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN
OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT.
WARNING: Dust that is created by power sanding, sawing, grinding,
drilling, and other construction activities may contain chemicals that are
known to cause cancer, birth defects, or other genetic abnormalities. These
chemicals include:
Lead from lead-based paints
Crystalline silica from bricks, cement, and other masonry products
Arsenic and chromium from chemically treated lumber
The level of risk from exposure to these chemicals varies, according to how
often this type of work is performed. In order to reduce exposure to these
chemicals, work in a well-ventilated area, and use approved safety
equipment, such as a dust mask that is specifically designed to filter out
microscopic particles.
!
SAVE THESE INSTRUCTIONS FOR REFERENCE

5
WARNING: Read all safety warnings
and instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
Work area safety
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of a ground fault
circuit interrupter (GFCI) reduces the risk of
electric shock.
Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
POWER TOOL SAFETY
!
SAVE THESE INSTRUCTIONS FOR REFERENCE

6
Personal safety –cont’d
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Hold power tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live"
wire will make exposed metal parts of the
tool "live" and could give the operator an
electric shock.
Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
POWER TOOL SAFETYPOWER TOOL SAFETY
SAVE THESE INSTRUCTIONS FOR REFERENCE

7
WARNING: Know your cordless
screwdriver. Do not plug in the charger until
you have read and understand this
Instruction Manual. Learn the tool’s
applications and limitations, as well as the
specific potential hazards related to this tool.
Following this rule will reduce the risk of electric
shock, fire, or serious injury.
Always wear eye protection. Any
power tool can throw foreign
objects into your eyes and cause
permanent eye damage.
ALWAYS wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1.
Everyday glasses have only impact resistant
lenses. They ARE NOT safety glasses.
WARNING: Glasses or goggles not in
compliance with ANSI Z87.1 could cause
serious injury when they break.
Always check to make sure the area where
screws are being driven or where holes are
being drilled does not have any hidden wiring.
Contact with a "live" wire will make exposed
metal parts of the tool “live” and could result in
an electric shock to the operator.
Do not drive screws or break into existing walls
or other blind areas where electrical wiring may
exist. If this situation is unavoidable, remove all
fuses or disconnect all breakers feeding the
work area.
Secure the workpiece in a vice or with clamps.
Never hold it in your hand or across your legs.
The rotating action of the driver may cause the
bit to come loose from the screw and cause
injury.
Never carry the cordless driver with your finger
on the switch. The tool is always in an "ON"
condition when the battery is charged.
Never hold the body of the cordless driver near
the switch while changing bits. Accidentally
touching the switch may start the tool and
possibly cause an injury.
Always use the correct shape of screwdriver bit
that matches the head of the screw.
Always use the largest size screwdriver bit that
will properly fit into the head of the screw.
Do not use worn or damaged screwdriver bits.
Worn or damaged screwdriver bits will not drive
the screw properly and may jump out of the
screw head, causing possible injury and
damage to the workpiece.
SPECIFIC SAFETY RULES
SAVE THESE INSTRUCTIONS FOR REFERENCE
!
!

8
WARNING: Only use the charger
supplied with this kit to charge the battery.
Charging any other batteries may damage
the charger and possibly cause serious
injury.
The battery pack for this driver is contained
within the main housing of the tool. Never
attempt to open the battery housing for any
reason. If the battery housing breaks or cracks,
immediately discontinue use and do not
recharge.
Do not charge the battery if the battery housing
is wet or shows any evidence of corrosion.
A small leakage from the battery may occur
under extreme usage, charging or temperature
conditions. This does not indicate a failure.
However, if the outer seal is broken and this
leakage gets on your skin, follow these steps:
1. Wash immediately with soap and water.
2. If liquid gets into your eyes, flush
immediately with clean water for a
minimum of 10 minutes and seek medical
attention.
NOTE: The battery liquid is slightly
alkaline.
Do not incinerate the battery. It can explode in a
fire.
Do not use an extension cord. Plug the charger
cord directly into an electrical outlet.
Use the charger only in a standard
120V, 60 Hz electrical outlet.
Do not use the charger in wet or damp
conditions. It is intended for indoor use only. Do
not use the charger near sinks or
tubs. Do not immerse the charger in water.
Do not allow the cord to hang over the edge of a
table or counter or touch hot surfaces. The
charger should be placed away from sinks and
hot surfaces.
Do not use the charger to charge any batteries
other than this cordless screwdriver. Other
batteries may explode.
Do not operate the charger if the cord or plug is
damaged. Replace the damaged cord and plug
immediately.
Do not operate the charger if it has received a
sharp blow, been dropped or otherwise
damaged in any way. Have a qualified
technician examine the charger and repair it if
necessary. Do not disassemble the charger.
Do NOT charge the batteries when the work
area or the battery temperature is at or below
0° C (32°F) or above 40°C (104° F).
Unplug the charger when not in use and before
cleaning or maintenance.
BATTERY PACK RECYCLING
To preserve our natural resources, please
recycle or dispose of batteries properly.
The batteries charged by this charger may
contain chemicals and metals that are harmful
to the environment. Never dispose of re-
chargeable batteries in your normal household
garbage or in landfill sites as they will add to the
pollution of the environment.
Please call 1-800-822-8837 for the location of
your nearest RBRC battery recycling location.
BATTERY AND CHARGER SAFETY
SAVE THESE INSTRUCTIONS FOR REFERENCE
!

9
V
Volts
A
Amperes
Hz
Hertz
W
Watts
kW
Kilowatts
Microfarads
L
Liters
kg
Kilograms
H
Hours
N/cm2
Newtons per square
centimeter
Pa
Pascals
RPM
Revolutions per minute
Min
Minutes
S
Seconds
or a.c.
Alternating current
Three-phase alternating
current
Three-phase alternating
current with neutral
Direct current
No load speed
Alternating or direct
current
Class II construction
Splash-proof
construction
Watertight construction
Protective grounding at
grounding terminal,
Class I tools
Revolutions or
reciprocations per
minute
Diameter
Off position
Directional arrow
Warning symbol
Wear your safety
glasses
SYMBOLS
WARNING: Some of the following symbols may appear on the screwdriver. Study
these symbols and learn their meaning. Proper interpretation of these symbols will
allow for more efficient and safer operation of this tool.
!
SAVE THESE INSTRUCTIONS FOR REFERENCE
3042597
LISTED
This symbol designates that this tool is
listed with U.S. and Canadian requirements
by ETL Testing Laboratories, Inc.
Conforms to UL Std. 60745-1, 60745-2-2.
Certified to CAN/CSA Std. C22.2
No. 60745-1-04, 60745-2-2-04.
JD501004

10
Battery
charger
Charger plug
KNOW YOUR SCREWDRIVER
Collet
Charging
indicator light
Charger
receptacle
Right/left switch
LED light
SCREWDRIVER BITS
TYPE
SIZE
QTY
R1, R2, R3
1 ea
PH1, PH2, PH3
1 ea
PZ1, PZ2, PZ3
1 ea
1/16", 1/8", 1/4"
1 ea

11
CHARGING THE BATTERY
1. Place the cordless screwdriver near a
120 V, 60 Hz electrical outlet.
2. Insert the battery charger plug (1) into the
charger receptacle (2) in the handle of the
cordless screwdriver (3) (Fig. 1).
3. Plug the battery charger (4) into a
120 V 60 Hz wall receptacle.
NOTES:
a) The red indicator light (5) in the handle will
turn ON, indicating the battery is being charged.
b) The red indicator light will remain ON until the
battery is fully charged.
c) A new battery or one that is completely
exhausted should be charged for 5 hours or until
the charger shuts down and the RED indicator
light goes OFF. After normal use, a battery
should be fully charged in about 3 hours.
d) If the battery does not charge properly, check
to make sure the electrical outlet is “live” and
that the temperature range in the work area is
between 0–40° C (32–104° F).
INSTALLING SCREWDRIVER BITS
WARNING: Never hold the body of the
cordless screwdriver with your fingers near
the switch while changing screwdriver bits.
Accidentally touching the switch may start
the tool and possibly cause an injury.
1. Select an appropriate screwdriver bit that
fits the head of the screw being driven.
NOTES:
a) Use the largest size screwdriver bit that
will properly fit the screw head.
b) Make sure the screwdriver bit is in good
condition and is neither damaged nor worn.
2. Insert the screwdriver bit (1) fully into the
screwdriver collet (2) (Fig. 2).
NOTE: Make sure the screwdriver bit is
fully inserted into the collet.
ASSEMBLY AND OPERATING
!
Fig. 1
Fig. 2

12
RIGHT/LEFT SWITCH
The Compact Cordless Screwdriver is equipped
with a convenient switch that functions as both
an ON/OFF switch and a RIGHT/LEFT switch.
1. To drive screws, press the upper part of
the switch (1) (Fig. 3). To turn the switch
OFF, release the switch.
2. To remove screws, press the lower part of
the switch (2).
SCREWDRIVER LIGHT
The cordless screwdriver is equipped with a
LED light (1) (Fig. 4). The light will automatically
turn ON when the switch is pressed. It will also
turn OFF when the switch is released.
PREPARING SCREW HOLES
It is important to prepare screw holes before
attempting to fasten two pieces of wood
together. Proper preparation will make screws
drive easier and prevent misaligned
components, stripped screw heads, splitting and
separating of wood components.
1. Clamp components that are to be screwed
together in their desired position (Fig. 5).
2. Drill a pilot hole (1) through the outer piece
(2) and into the inner piece (3). Drill hole
2/3 the diameter of the smooth portion of
the screw shank.
NOTE: If the wood is soft, drill the hole 2/3
the length of the screw. If the wood is hard,
drill the hole the full length of the screw.
3. Remove the clamp from the two pieces to
be screwed together.
4. Enlarge the hole (1) in the outer piece (2)
so that it is the same size as the smooth
portion of the screw shank (Fig. 6).
5. If using a flat head screw, counter-sink the
hole (4) so the head of the screw will be
flush with the surface when fully driven into
place.
ASSEMBLY AND OPERATINGASSEMBLY AND OPERATING
Fig. 5
Fig. 6
Fig. 3
Fig. 4

13
LITHIUM-ION BATTERY PERFORMANCE
Lithium-ion rechargeable batteries generally
provide superior performance to nickel-cadmium
batteries when used in power tools.
●Faster charges
●Longer battery life
●More power
●Lighter weight
Lithium-ion batteries perform best and deliver
peak output power at room temperature (20° C
or 68° F). When operated in lower temperatures,
the battery output will be reduced and it will
NOT function below –20° C (-4° F). At higher
temperatures, output power will increase as the
heat generated by the battery during use
increases the internal temperature of the
battery. The result is increased power as the
tool is used.
DRIVING SCREWS
When driving screws, care must be taken to use
the bit that correctly fits the head of the screw
being driven. Make sure you use the largest bit
size that will properly fit into the head of the
screw. The bits must also be in good condition
and not worn so they will drive screws without
slipping out of the screw head.
1. Select the correct screwdriver bit for the
screw being driven.
2. Insert the bit (1) fully into the screwdriver
collet (2) (Fig. 7).
3. Insert the screwdriver bit fully into the
screw head (3).
4. While holding the screwdriver firmly against
the screw and the bit aligned with the
screw, press the upper part of the switch to
start the screwdriver and drive the screw.
5. When the screw is driven to the correct
depth, release the switch and the
screwdriver will stop.
6. When the switch is released and the
screwdriver stops turning, the spindle will
automatically lock. Fully tighten the screw
by manually rotating the screwdriver
handle in a clockwise direction.
7. To remove screws, follow the same
general procedure as for driving screws.
When starting the screwdriver, press on
the lower part of the switch.
ASSEMBLY AND OPERATING
For safety reasons, the operator must
read the sections of this Owner’s Manual
entitled "GENERAL SAFETY
WARNINGS", "POWER TOOL SAFETY",
"SPECIFIC SAFETY RULES", "BATTERY
AND CHARGER SAFETY" and
"SYMBOLS" before using this
screwdriver.
Verify the following every time the
screwdriver is used:
1. Screwdriver bit is the correct type &
size, not worn and not damaged in
any way.
2. Workpiece is properly secured.
3. Safety glasses are being worn.
Failure to observe these safety rules will
significantly increase the risk of injury.
WARNING
!

14
DRIVING SCREWS –cont’d
GENERAL
WARNING: When servicing, use only
identical replacement parts. The use of any
other part may create a hazard or cause
product damage.
DO NOT use solvents when cleaning plastic
parts. Plastics are susceptible to damage from
various types of commercial solvents and may
be damaged by their use. Use a clean cloth to
remove dirt, dust, oil, grease etc.
WARNING: Do not allow brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc. to come into contact
with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
DO NOT abuse power tools. Abusive practices
can damage the tool and the workpiece.
WARNING: DO NOT attempt to modify
tools or create accessories. Any such
alteration or modification is misuse and
could result in a hazardous condition leading
to possible serious injury. It will also void
the warranty.
LUBRICATION
All of the bearings in this tool are lubricated with
a sufficient amount of high-grade lubricant for
the life of the unit under normal conditions.
Therefore, no further lubrication is required.
MAINTENANCE
!
!
!
Fig. 7
ASSEMBLY AND
OPERATING

15
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
To preserve our natural resources, please
recycle or dispose of batteries properly.
This product contains lithium-ion batteries.
Never dispose of lithium-ion batteries in normal
household garbage or in landfill sites as they will
add to the pollution of the environment.
Consult the local waste authority for information
regarding available recycling and disposal
options.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
WARNING: Upon removal of the battery,
cover the terminals of the battery with
electrical or heavy-duty adhesive tape. Never
touch both terminals with metal objects or
body parts as a short circuit may result.
Keep away from children. Do not attempt to
destroy or disassemble battery or remove
any of its components. Lithium-ion batteries
must be recycled or disposed of properly.
Failure to comply with these warnings could
result in fire and serious injury.
BATTERY MAINTENANCE
For power, long operational life and light weight,
this tool is powered by a lithium-ion battery.
These lithium-ion batteries are powerful, rugged
and will provide hundreds of charge/discharge
cycles if properly maintained.
NOTE: Never remove the battery in order to use
it for any other purpose. This will void the
warranty.
How to care for the lithium-ion battery
1. Do not use the cordless screwdriver at
temperatures below –10° C (14°F).
2. Never allow a battery to freeze.
3. Do not charge a battery that has been
stored at or below 0° C (32°F) or above
40°C (104° F). Allow it to sit at room
temperature for at least 30 minutes before
charging.
4. Do not charge the battery if the tool seems
warm to the touch.
5. To protect the battery this tool is equipped
with a battery monitor circuit. When the
battery voltage reaches the minimum
manufacturer’s recommended voltage, it
interrupts the power to the tool, signalling
that the battery should be charged.
6. At very low temperatures battery output is
severely reduced. However, it is safe to
use the tool, as its output will increase to
normal levels due to self-generated heat.
MAINTENANCE
!

16
EXPLODED VIEW

17
WARNING: When servicing, use only original equipment replacement parts. The use of any
other parts may create a safety hazard or cause damage to the screwdriver.
Any attempt to repair or replace electrical parts on this screwdriver may create a safety hazard unless
repairs are performed by a qualified technician. For more information, call the Toll-free Helpline, at
1-866-349-8665 (Monday through Friday 9am –5pm Eastern Time).
Always order by PART NUMBER, not by key number.
Key #
Part #
Part Name
Quantity
1
203006
Stop
1
2
242505
Steel stop rod
1
3
226302
Retaining ring
1
4
147223
Collet
1
5
205510
Sleeve
1
6
312148
Gear case
1
7
215009
Pins
6
8
201301
Nesting ring
1
9
201303
Gear bushing
1
10
205507
Planetary gear carrier
1
11
200004
Planetary gear
3
12
144001
Planetary drive plate
1
13
315502
Planetary gear
3
14
221208
Locking plate
1
15
200008
Motor pinion gear
1
16
500812
Screw, M2.5 x 4.5
2
17
316513
Motor flange
1
18
500400
Screw, ST2.5 x 8
3
19
130023
Motor
1
20
306112
Housing
1
21
317036
Switch
1
22
162866
PCB
1
23
176010
Battery pack
1
24
500006
Self-tapping screw
6
PARTS LIST
!

18
Rev 1.3 10/09/2015
IMPORTED BY:
Wal-Mart Canada Corp.
1940 Argentia Rd.
Mississauga, Ontario L5N 1P9
Walmart.ca
MADE IN CHINA
POWER IT®4V LI_ION CORDLESS SCREWDRIVER WARRANTY
1-YEAR LIMITED WARRANTY:
This POWER IT®brand power tool carries a 1-Year Limited Warranty to the original
purchaser. If the tool fails within one (1) year from the date of purchase, simply bring this
tool with your original sales receipt back to your nearest WALMART retail store. At its
discretion, WALMART agrees to have the tool replaced with the same or similar
WALMART product free of charge, within the stated warranty period, when returned by the
original purchaser with original sales receipt. Notwithstanding the foregoing, this limited
warranty does not cover any damage that has resulted from abuse or misuse of the
Merchandise. This warranty: (1) excludes expendable parts including but not limited to
blades, belts, bits, light bulbs, and/or batteries; (2) shall be void if this tool is used for
commercial and/or rental purposes; and (3) does not cover any losses, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may
have other rights, which vary from province to province. Be careful, tools are dangerous if
improperly used or maintained. Seller’s employees are not qualified to advise you on the
use of this Merchandise. Any oral representation(s) made will not be binding on seller or
its employees. The rights under this limited warranty are to the original purchaser of the
Merchandise and may not be transferred to any subsequent owner. This limited warranty
is in lieu of all warranties, expressed or implied including warranties or merchantability and
fitness for a particular purpose. Seller shall not be liable for any special, incidental, or
consequential damages. The sole exclusive remedy against the seller will be for the
replacement of any defects as provided herein, as long as the seller is willing or able to
replace this product or is willing to refund the purchase price as provided above. For
insurance purposes, seller is not allowed to demonstrate any of these power tools for you.
For questions / comments, technical assistance or repair parts –
Please call toll free at:
1-866-349-8665 (Monday through Friday 9am –5pm (Eastern Standard Time)
SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.