PowerAcoustik PACD-507 User manual

MUTE
SEL
ENTU
EQ
REL
CLK
MO
INT
LO UD
LO C
RPT RDM
BA N D
PWR
CAR COMPACT DISC PLAYER
INSTRUCTION MANUAL
AUTO-LOADING COMPACT DISC PLAYER
AM/FM STEREO MANUAL TUNING RADIO
PACD-507

1
BASIC OPERATION
5647 8 9 10 11 12
31 2 13 15
MUTE
SEL
ENTU
EQ
REL
CLK
MO
INT
LO UD
LO C
RPT RDM
BA N D
PWR
CAR COMPACT DISC PLAYER
14
16 17
1. REL BUTTON
Press it to detach the front panel when you want to take the unit away.
2. CLOCK ADJUSTMENT BUTTON
Press it to change the display to clock display. In clock display, press CLK button
for more than 2 seconds until time flashes on LCD, then press button to adjust
hour. Press button to adjust minute. When adjustment is completed, release it.
3. TUNE BUTTON
Rotate it to select your desired broadcasting station.
4.5. VOLUME +/- & SEL BUTTON
Press SEL button to change the mode as below:
VOL BAS TRE BAL FAD
(Volume) (Bass) (Treble) (Balance) (Fader)
A. The volume level can be adjusted at any time by pressing the + or – button as
select mode has been initially defaulted at volume mode.
B. Press the SEL button to select volume, bass, treble, balance, fader mode, then
use volume + or – button to adjust them.
Note: The fader function for 4 speakers system only.
6. EQ BUTTON
Press it repeatedly to switch between 3 preset equalizer curves: CLAS, POP and
ROCK. The sound quality will be changed.

2
BASIC OPERATION
7. MO/INT BUTTON
MO MODE: Press it to select mono or stereo mode.
INT MODE: During CD mode, press “INT”(intro) button to hear the first 10 seconds
of each track on the disc. Press this button again to restore the player to its normal
play mode.
8. LOC/RPT BUTTON
LOCAL/DISTANCE MODE: When in the radio mode, press it to select local or
distance broadcast station receive sensitivity.
REPEAT MODE : During CD mode, press RPT button to repeat a single track.
9. LUD/RDM BUTTON
LUD MODE: When reduce the volume to half level, press it to enhance the bass
effect.
RDM MODE: During CD mode, press RDM button for more than 2 seconds to play
all tracks in the random order, press it again to cancel the function.
10. MUTE BUTTON
Press it to eliminate the sound immediately. Press it again to release this mode and
recover the previous volume level.
11. BAND BUTTON
RADIO MODE: Press it to select your desired radio band and the word which band
is selected will be displayed on LCD.
CD MODE: Press it to change the mode to radio mode.
12. PWR BUTTON
Press power button to turn on or off the unit.
13. BUTTON
RADIO MODE: Change the mode to CDP mode.
CDP MODE: During CD playback, press it will stop play temporarily. Press it again
to return to normal play back.
14. or BUTTON
A. In CD mode, press / button during playback to skip to next or back one track.
B. In CD mode, press and hold / button for several seconds during playback
to fast forward or fast reverse. Releasing the button to stop fast playing.
15. BUTTON
Press (EJECT) button to stop CD play and eject CD from the slot.
16. LED INDICATOR
Flashing when detachable panel is removed.
17. RESET BUTTON
Press it to rehabilitate the distorted program to zero.

3
METAL MOUNTING STRAP
DASH BOARD
CONSOLE
SLIDE BRACKET HOUSING
HEX NUT
SPRING WASHER
PLAIN WASHER
PLAIN WASHER
TAPPING SCREW
HEX BOLT
INSTALLATION

4
ELECTRIC CONNECTION
FOR 4X7W
RED
YELLOW
BLACK
BLUE
VIOLET
VIOLET/BLACK
FRONT RCA
OUTPUT CABLE (optional
FRONT
RchSPK
REAR
RchSPK
REAR
LchSPK
FRONT
LchSPK
AUTO
ANTENNA
GROUND(B-
MEMORY (B+
IGNITION
SWITCH (B+
ANTENNA CONNECTOR
FUSEBOX
GREEN
GREEN/BLACK
GREY
GREY/BLACK
WHITE
WHITE/BLACK
Rch RED
Lch WHITE
MAIN UNIT

5
DISC NOTICE
DISC PLAY:
Cleaning discs
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE:
Do not use so solvents such as benzine, thinners. Commercially available
cleaners or anti static spray damage the unit.
Insert a disc with the label surface down. Doing so may damage the unit.
NOTE:
Do not try to insert another disc when one has been already inserted. Doing so may
damage the unit.
Handle the disc by its edge. And to keep the disc clean, do not touch the surface.
Do not stick paper or tape on the disc.
Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Or leave
it in a car parked in direct sunlight where there can be a considerable rise in
temperature.
Label
surface up

6
SPECIFICATIONS
Supply voltage : 12V DC (11V-15V), test voltage 14.4V, negative ground
Current consumption : Less than 5A
Audio signal output
characteristics : (1) Frequency response 20 Hz-20 kHz
(2) S/N Radio 85 dB (JIS)
(3) Wow and Flutter Below measurable limits
FM SECTION:
Frequency Coverage ............................................................................. 88 to 108 MHz
IF ................................................................................................................... 10.7 MHz
Sensitivity (S/N = 30 dB).................................................................................... 20 dBu
Stereo Separation.............................................................................................. >30 dB
AM SECTION:
Frequency Coverage.......................................................................... 530 to 1710 KHz
IF...................................................................................................................... 455 KHz
Sensitivity (S/N = 30 dB).................................................................................... 40 dBu
Note:
Specifications and design are subject to modification, without notice, due to improvements
in technology.

7
TROUBLE SHOOTING
Before going through the check list, check wiring connection. Should any of the
problem persist after check list has been made, consult your nearest service dealer.
Symptom Cause Solution
No power. The car ignition switch is If the power supply is properly
not on. connected to the car accessory
terminal, switch the ignition key
to “ACC”.
The fuse is blown. Replace the fuse.
Disc cannot be Presence of disc inside Remove the disc in the player,
loaded or ejected. the player. then put a new one.
Inserting the disc in reverse Insert the compact disc with
direction. the label facing upward.
The disc is extremely Clean the disc or try to play a
dirty or defective. new one.
Temperature inside the car Cool off or until the ambient
is too high. temperature return to normal.
Condensation. Leave the player off for an hour,
then try again.
No sound. Volume is in minimum.
Adjust volume to a desired level.
Wiring is not properly Check wiring connection.
connected.
Sound skips. The installation angle is Adjust the installation angle less
more than 30 degrees. than 30 degrees.
The disc is extremely dirty Clean the compact disc, then
or defective disc. try to play a new one.
The operation keys The built-in microcomputer Press the RESET button.
do not work. is not operating properly Front panel is not properly fixed
due to noise. into its place.
The radio does not The antenna cable is not Insert the antenna cable firmly.
work. connected.
The signals are too weak. Select a station manually.
88-C2950-14