Precision Electronics DW200C User manual

DW200C manual
Product Name：2.4GHz Wireless digitalAV transmitter
Product Model：DW200C
1Introduction
This mini size product adopt with an advanced microwave and wireless transfer
technology developed and manufactured by 2.4GHz wireless digital receiving
modules, which has a stable performance and strong anti-interference function.
This product can be used for wireless cameras to record wireless camera signals.
2Main features..
2.1 Digital 2.4G wireless modules.
2.2 Support A/V output
2.3 Support AE and AWB
2.4 Transmission distance up to 100M ( open space )
2.5 M-JPEG format Compression
2.6 Support 2 times digital zoom
3Camera Installation
3.1 DC 5V input
3.2 Pairing button
Press the Pair the button on camera and wait for a while, the monitor
which connected to the corresponding receiver will appear the image
from the camera that have matched. Pairing succeeded.
4Troubleshooting
Symptom Remedy
The power does
not turn on.
zCheck that the AC power cord is connected securely.
z(In case of power failure) Check the breaker.
No image display
on monitor
zCheck if Monitor it is on and work under NTSC / PAL
model
zCheck monitors video cable and connections.

zCheck camera video cable and connections.
zConfirm that the camera has power offered.
z
There is no sound. zCheck if the audio output is well connected with monitor.
Interruption in
Image and Sound
zIf there is a microwave oven close by, turn the microwave
oven off.
zYou may have other units that run on the 2.4GHz signal.
Move their base away from both the transmitter and/or the
receiver
zYour home may have a metal frame that reduces the range
of the unit. Contact your SVAT customer service for more
information
Poor Reception
Quality
zMove the Cameras and/or the receiver around to see it
reception improves.
zMake sure all the A/V cables are plugged firmly and
tightly..
5Technical specifications
Power input DC+5V
Video format NTSC/PAL
Type of antenna SMA antenna
Brightness adjustment 0~5
Digital zoom 2 times
Transmission distance 100M（test in the open air）
6Notes
6.1 This product can not be folded, pressed or impacted.
6.2 The repairing of this product can only be done by the Professionals.
6.3 The parts of this product can not be open by non-professionals.
6.4 This product can not be used in high temperature environments.
6.5 Replacement Parts – When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
6.6 Precision Electronics Co., Ltd. does not have the responsibility if customer
attempt for any illegal use of this product.
6.7 The book is finally be interpreted by Precision Electronics Co., Ltd.

7. Antenna Requirent
According to the FCC Part 15 Paragraph 15.203, an intentional radiator shall be designed to
ensure that no antenna other than that furnished by the responsible party shall be used with the
device. The use of a permanently attached antenna to the intentional radiator shall be considered
sufficient to comply with the provisions of this section. This product has a permanent antenna,
fulfill the requirement of this section
FCC NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1)this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.