Kramer WP-110xl User manual

KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
WP-110xl
UXGA/Data Line Transmitter
P/N: 2900-300294 Rev 3

WP-110xl – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Shielded Twisted Pair/Unshielded Twisted Pair 3
2.4 Recycling Kramer Products 3
3Overview 4
3.1 Defining the WP-110xl UXGA/Data Line Transmitter 4
4Connecting and Installing the WP-110xl 6
4.1 Grounding the Wall Plate 7
4.2 Wiring the TP LINE OUT RJ-45 Connector 8
5Capturing the EDID 9
5.1 Capturing the EDID from a Display Device 9
5.2 Loading the Default EDID 10
6Technical Specifications 12
Figures
Figure 1: WP-110xl UXGA/Data Line Transmitter 5
Figure 2: Connecting the WP-110xl UXGA/Data Line Transmitter 6
Figure 3: Ground Connection 7
Figure 4: TP PINOUT 8
Figure 5: WP-110xl US Wall Plate 10
Figure 6: WP-110xl EU Wall Plate 11

WP-110xl - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products; GROUP 12: Digital Signage; and GROUP 13: Audio, and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer WP-110xl UXGA/Data Line
Transmitter, which is ideal for the following typical applications:
Presentation and multimedia applications
Long range graphics distribution for schools, hospitals, stores and security
applications

2
WP-110xl - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer WP-110xl away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
i
!

WP-110xl - Getting Started
3
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
2.3 Shielded Twisted Pair/Unshielded Twisted Pair
We recommend that you use Shielded Twisted Pair (STP) cable, and stress that
the compliance to electromagnetic interference was tested using STP cable. There
are different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP
is intended for analog signals where skewing is not an issue.
In cases where there is skewing, our Unshielded Twisted Pair (UTP) skew-free
cable, Kramer BC-XTP, may be advantageous, and UTP cable might also be
preferable for long range applications. In any event when using UTP cable, it is
advisable to ensure that the cable is installed far away from electric cables, motors
and so on, which are prone to create electrical interference.
2.4 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
!

4
WP-110xl - Overview
3 Overview
The WP-110xl is a high-performance, twisted pair (TP) transmitter for computer
graphics signals over extended distances using CAT 5/6 cable. The transmitter
can be connected to compatible receivers, such as, the PT-120xl, TP-122xl and
the TP-126xl, (for 250m range), or the PT-120, TP-120, TP-120-od, TP-122,
TP-122N, TP-122-od, TP-124, TP-124-od and the TP-124, (for 100m range).
The WP-110xl comes in three models: the WP-110xl 69mm US version and the
two WP-110xl 80/86mm European versions.
More specifically, the WP-110xl features:
Resolution up to WUXGA, 1080p
HDTV compatibility up to 1080p
Extended transmission range of up to 250m (820ft) with suitable devices
EDID Capture copies and stores the EDID from a display device
Increased level of protection against noise, spikes and interference in
adverse environments
3.1 Defining the WP-110xl UXGA/Data Line Transmitter
This section defines the WP-110xl.

WP-110xl - Overview
5
Figure 1: WP-110xl UXGA/Data Line Transmitter
#
Feature
Function
1
PC IN 15-pin HD connector
Connects to the computer graphics source
2
ON LED
Lights green when powered on
3
+12V/GND Terminal Block
Connects to the 12V DC power supply
4
LINE OUTPUT RJ-45 Connector
Connects to the twisted pair receiver, (for
example, the PT-120 or TP-126xl)
5
Ground Terminal
Crimp terminal connects to earth

6
WP-110xl - Connecting and Installing the WP-110xl
4 Connecting and Installing the WP-110xl
Always switch off the power to each device before connecting it to your
WP-110xl. After connecting your WP-110xl, connect its power and
then switch on the power to each device.
To connect the WP-110xl as illustrated in the example in Figure 2:
1. Connect the LINE OUTPUT RJ-45 connector on the rear panel of the WP-
110xl to the TP receiver, (for example, the PT-120 or the TP-126xl).
2. Ground the wall plate, (see Section 4.1).
3. Connect the 12V DC power supply to the 12V and GND terminals taking
care to observe the correct polarity.
4. Install the WP-110xl into a suitable wall box or rack mount.
5. Connect a computer graphics source (for example, a PC) to the PC IN
15-pin HD connector.
Figure 2: Connecting the WP-110xl UXGA/Data Line Transmitter
i

WP-110xl - Connecting and Installing the WP-110xl
7
4.1 Grounding the Wall Plate
Grounding the WP-110xl is recommended. The grounding wire is connected to the
rear of the chassis of the unit. The grounding screw is used to earth the unit to the
ground of the building. This helps prevent static electricity from interfering with
product performance.
To connect the grounding to the WP-110xl as shown in Figure 3:
1. Crimp the ring-tongue terminal to the building grounding point wire.
(We recommend that you use a green-yellow #18 AWG wire (0.82mm2) crimped with a
proper hand-tool).
2. Insert the M3x6 screw through the toothed locking washers and the ring-
tongue terminal in the order shown in Figure 3.
3. Insert the M3x6 screw (with the two toothed lock washers and ring-tongue
terminal in place) into the grounding screw hole on the rear of the WP-110xl
and tighten the screw.
Figure 3: Ground Connection
#
Item
1
M3x6 Screw
2
M3 Toothed lock washers
3
M3 Ring tongue terminal

8
WP-110xl - Connecting and Installing the WP-110xl
4.2 Wiring the TP LINE OUT RJ-45 Connector
This section defines the TP pinout, using a straight pin-to-pin cable with RJ-45
connectors.
EIA /TIA 568B
Figure 4: TP PINOUT
PIN
Wire Color
1
Orange / White
2
Orange
3
Green / White
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown

WP-110xl - Capturing the EDID
9
5 Capturing the EDID
The WP-110x can capture an EDID from a connected display or can load a default
EDID when no display is available or the unit cannot capture the EDID from the
connected display.
5.1 Capturing the EDID from a Display Device
To capture an EDID from a display:
1. Using a Philips screwdriver, remove the four screws holding the faceplate to
the PCB assembly.
2. Using a short cable (for example, Kramer model number C-MGM/MGM-1),
connect the PC IN input 15-pin HD connector on the WP-110xl to the 15-pin
HD connector of the display and turn the display on.
3. Connect the 12V DC power adapter to the power terminal block (see
Figure 1) on the WP-110xl and connect the adapter to the mains electricity.
4. Press the EDID capture button (item 1 on Figure 5 and Figure 6).
The EDID status LED (item 2 on Figure 5 and Figure 6) flashes slowly
several times. The new EDID is captured when the LED stops flashing and
lights solid.
Note: If the status LED flashes quickly for a few seconds and then stays on
solid, the WP-110xl could not capture the EDID and loaded the default EDID
instead.
5. Unplug the power adapter from the mains and disconnect it from the
WP-110xl.
6. Replace the faceplate and secure the four screws removed in Step 1.

10
WP-110xl - Capturing the EDID
5.2 Loading the Default EDID
To load the default EDID:
1. Using a Philips screwdriver, remove the four screws holding the faceplate to
the PCB assembly.
2. Do not connect a display to the PC IN input 15-pin HD connector.
3. Connect the 12V DC power adapter to the power terminal block (see
Figure 1) on the WP-110xl and connect the adapter to the mains electricity.
4. Press the EDID capture button (item 1 on Figure 5 and Figure 6).
The EDID status LED (item 2 on Figure 5 and Figure 6) flashes quickly for a
few seconds and then stays on solid.
5. Unplug the power adapter from the mains and disconnect it from the
WP-110xl.
6. Replace the faceplate and secure the four screws removed in Step 1.
Figure 5: WP-110xl US Wall Plate

WP-110xl - Capturing the EDID
11
Figure 6: WP-110xl EU Wall Plate

12
WP-110xl - Technical Specifications
6 Technical Specifications
INPUT:
1 VGA / UXGA on a 15-pin HD connector
OUTPUT:
1 RJ-45 LINE OUTPUT connector
VIDEO RESOLUTION:
Up to WUXGA, 1080p
RANGE:
Up to 250m (820ft)
COUPLING:
AC
POWER CONSUMPTION:
12V DC, 70mA
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
WALL PLATE SIZE:
2 gang EU/US
DIMENSIONS:
2 gang USA: 11.4cm x 3.5cm x 11.4cm (4.49" x 1.4" x
4.49", W, D, H)
2 gang Europe: 15.2cm x 3.5cm x 8.0/8.6cm (5.98" x
1.4" x 3.15/3.39", W, D, H)
WEIGHT:
0.14kg (0.31lbs) approx.
ACCESSORIES:
Power supply
OPTIONS:
19” rack adapters for EU and US wall plates; Kramer
on-wall boxes
Specifications are subject to change without notice at http://www.kramerelectronics.com

For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: [e-mail]
P/N:
2900-300294
Rev:
3
!
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing