Premier Mounts 7170-0977 Series User manual

INST-1095 v1.0
Publ. May 2022
Installation Guide
Outdoor Flat/Tilt Wall Mount
For Samsung OH55
7170-0977 Series

Page 2
Installation Guide
7170-0977 Series
BASIC INFORMATION
INSTALLATION ENVIRONMENT
ENCLOSED OR RECESS AREA
Wall mount model 7170-0977-00 (at)
7170-0977-01 (Tilt)
Display Model OH55
Installation Conguration Landscape
Portrait
Tilt feature Available by model
Fixed at at, 5 deg, 10 deg , 15 deg
Environment Temperature Negative 30 Celsius to 50 Celsius, 24/7 operation
Wall application Solid concrete, Hollow Brick, or 3/4" plywood-backed wall
Product Weight 31.5 lbs [14.4 kg] for at model
45.5 lbs [20.6 kg] for tilt model
OA Weight (Mount & Flat-Panel) 147.5 lbs [66.9 kg] (at)
161.5 lbs [73.26 kg] (Tilt)
OA Width x Depth x Height (Portrait) 28.8” x (5.55” at to 17.33” tilt) x 50.87”
OA Width x Depth x Height (Landscape) 49.63” x (5.55” at to 14.62” tilt) x 30.38”
Beach Must not be placed in areas where seawater is accessible
Wind Must not be placed in areas with strong winds caused by storms or other
natural phenomenon
Snow Awning or cover is needed to avoid snow piling directly onto inlet
Iron Dust Suitable, (e.g. train or subway station)
Clearance 52mm (2.05”) minimum all around
Additional front glass Prohibited in any enclosed area

Page 3
Installation Guide
7170-0977 Series
HARDWARE:TILT ADAPTER (OPTION):
CORE COMPONENTS:
1/4-20” x 2-1/2”
Button Head
1/4” Flat Washer
x12 x12
Shell Expansion
Anchor
1/4-20 x 5” Pan
Head
5/16” x 3” Hex
Lag
1/4” Flat Washer1/4-20” x 3/4”
Button Head
M8 x 16mm Hex
Bolt
Lock-it
Security Barrel
5/16” Flat
Washer
5/16” Split Lock
Washer
x4
x6 x10x6
x4
x6 x1
x8
x8
Mounting
Frame x2
Tilt Adapter x2
Tilt Coupling
Bracket x4
Tilt Brace x2
Partition /
Baffle x2
Wall Plate x1
Hooking
Bracket x2

Page 4
Installation Guide
7170-0977 Series
1
2
1/4” Flat
Washer
1/4-20” x
3/4” BH
Ba󰀪e /
partition
Ba󰀪e /
partition
Mounting
frame x2
Torque:
12 to 15 kgf/cm
67 to 84 lbf/in
4 Places
M8 x 16mm
Hex Bolt
5/16” Flat
Washer
5/16” Split
Lock Washer
x4

Page 5
Installation Guide
7170-0977 Series
Flat - Figure A
UPUP
This side down
Install flat or tilt brackets, landscape or portrait.
1/4” Flat
Washer
1/4-20” x
3/4” BH
x4 x4
Figure C
Mounts to brackets
shown in figure c.
Security
Barrel
1/4-20 x 5”
Pan Head x4
If applicable, tilt
coupling bracket
mounting hole.
Tilt - Figure B
All hardware shown are 1/4-20” x 3/4” BH screw w/ washer.
Mounts to brackets
shown in figure c.
Above
Below
10 Deg
10 Deg
5 Deg
5 Deg
15 Deg
15 Deg
3

Page 6
Installation Guide
7170-0977 Series
Solid Concrete/Brick
Wood Application
Brick (Alternative)
Use proper mounting guideline per state code. All hardware, threaded rod, epoxy, and other mounting
hardware are not supplied. Shown for reference only.
Use a stud finder to determine the center of the wall studs in the vicinity of the mount and mark the wall.
Drywood wall must be backed with at least 3/4” plywall to support the weight of the mount and flat-panel.

Page 7
Installation Guide
7170-0977 Series
MOUNTING DIMENSIONSMOUNTING DIMENSIONS
3/4” PLYWOOD-BACKED
(OPEN)
CONCRETE/BRICK
(OPEN)
Requires a minimum of 4 mounting screws on upper slots
and 2 on bottom slots. Shell expansion anchors are suitable
for both concrete and brick.
Requires at least 4 mounting screws into wood stud and 4
mounting screws on the upper slots. Shell expansion anchors
are not used for this application.
Letter Description Portrait Landscape
ANet Height 50.87” [1292.1mm] 30.38” [771.7mm]
BTilt offset (Top) 2.50” [63.5mm] 2.14” [54.4mm]
CTilt o󰀨set (Bottom) 1.24” [31.5mm] 1.59” [40.4mm]
DBottom to mounting slot of the wall plate 22.30” [22.3mm] 12.33” [313.2mm]
EMimimum clearance of recess area 54.85” [1393.2mm] 34.36” [872.8mm]
1.97” [50mm] mininum
gap for ventilation
E
Depth varies
by angle
Viewing
Height
3.91” [99.3mm]
(mounting slot)
B
C
D
A
4
5

Page 8
Installation Guide
7170-0977 Series
6
7
(2) 1/4-20 x 5” Pan Head
(Post-leveling Screws)
(2) 1/4-20 x 5” Pan Head
(Locking Screws)
SECURITY FEATURESECURITY FEATURE
Cable & lock Padlock
Shown: Portrait at 5 deg tilt
8
Lock the security barrel to prevent the mount from
being tampered or disengaged.
Route cables through
holes on the bracket.
50mm mininum gap
for ventilation all
around
Cover / Roof (Optional)
UP arrow

Page 9
Installation Guide
7170-0977 Series
49.58” [1259.4mm]
9.53” [242.1mm]
48.37” [1254.0mm]
17.33” [440.2mm]
49.63” [1260.6mm]
5.55” [141mm]
49.16” [1248.7mm]
13.50” [342.9mm]
5 Deg 10 Deg 15 DegFlat
Portrait
28.83” [732.3mm]
8.61” [218.7mm]
28.64” [727.5mm]
11.67” [296.4mm]
28.95” [735.3mm]
14.62” [371.4mm]
5 Deg 10 Deg 15 Deg
28.80” [731.5mm]
5.55” [141mm)
Flat
Landscape
49.16” [1248.7mm]