Costway HV10055 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
TV Stand
HV10055
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:[e-mail]
UK:[e-mail]
AU:[email protected]
US office: Fontana UK office: Ipswich AU office: Truganina

03
Before You Start
02
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
large center panel
small center panel
5
kcenter apron bottom

05
04
Install the small center
panel(f) to the shelf
panel.
1
After done with step 1.
install large center
panel(e) to the shelf plank.
2
Important note:
- Place all wooden parts on a clean and smooth surface to avoid the
parts from being scratched.
- Keep all hardware parts out reach of children.
1x 2
1x 2
8 x 30mm
2x 2
M4 x 32mm
7x 5
Install apron bottom and
center apron bottom to
the bottom plank.
3
d
f
hk
b
e i
j
c
g
a
b
hk
5x

07
06
4
5. Install complete bottom plank to the
center plank (e) and (f).
6. Install the side plank(door side) to the
bottom plank and apron.
5&6
Install top plank to both side plank
and center plank.
7
8. Install single touch magnet
to the top plank and to the
door plank.
9. Install door
plank using
hinges.
8&9
Install complete bottom
plank to the center plank (e)
and (f).
1x 4
1x 8
8 x 30mm
2x 2
1x 6
8 x 30mm
2x 4
3x 2 5x 1
M3.5 x 16mm
7x 11

08 09
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care
Turn around cabinet and place the
back cover to the correct position
before install by using power nail.
10 6x 12