Premier Mounts UMB-DBTS User manual

www.mounts.com | North America 800.368.9700 | International [phone]
(4) M6 or M8 Screws
(4) Universal Washer
(4) Universal Spacer
(4) Display Brackets
Thread Depth Indicator
(Qty 1)
Universal Spacer
(Qty 8)
Display Bracket
(1 Pair)
Universal Washer
(Qty 4)
M6 x 12 mm screw
(Qty 4)
M6 x 25 mm screw
(Qty 4)
M8 x 12 mm screw
(Qty 4)
M8 x 16 mm screw
(Qty 4)
M6 x 25 mm screw
(Qty 4)
M6 x 16 mm screw
(Qty 4)
If necessary use a Phillips screw driver
to adjust the clamp brackets down.
Use a thread depth indicator to find the appropriate hardware.
Install the display brackets using four (4) M6 or M8 screws and
four (4) universal washers. Use universal spacers if necessary.
Tilt Adjustments
Tilt adjustments can be made shown in figure 1 by removing the Phillips
screw on the display brackets and installing it to another hole.
( 0º - 5º - 10º - 20º) Degrees
Figure 1
12
UMB-DBT / UMB-DBTS
Installation Guide

www.mounts.com | North America 800.368.9700 | International [phone]
Use a Phillips screw driver to secure
the display brackets to the unistrut.
Attach the display brackets to the unistrut.
Commercially available recommended unistrut
P4100T 1 5/8” x 13/16” 14 gauge.
Display Brackets
Unistrut
Unistrut
Leveling adjustments can be made shown in figure 2 by turning the knurl knob.
Leveling
Figure 2
9500135_0
3
5
4
UMB-DBT / UMB-DBTS
Installation Guide