Premium Poly Patios Garden Classic GCLT0044D Firmware update

#GCLT0044D, #GCLT0044C, #GCLT0044B
in Garden Classic Collection
HARDWARE PACKAGE
8 ¼" x 2" Allen Head Bolts
8 ¼" Flange Nuts
2 Umbrella Knobs
16 3" Screws
12 1½" Screws
1Allen Wrench
PACKAGE CONTENTS
1Top
2 Bases
1 Cross Support
2Footrests (Bar and Counter Height Only)
4 Braces
1 Hardware Package
TOOLS NEEDED:
Hammer
7/" Wrench
Cordless Drill/Screwdriver
Allen Wrench (Included)
Firmlytapboltsintopre-drilled
holesbeforetightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
Garden Classic Table
Umbrella
Holder
Cross Support
Base
Upright
Top Boards
Brace
Apron
Footrest
NOTE: Bar
and Counter
Height Only
Assembly Directions for
44" Square Table
Be sure to
use 1½"
screws when
fastening
braces.
!
www.Poly-lumber-Furniture.com
Toll Free 1-877-904-1234

STEP #1 - Fasten a Base to the aluminum frame of the
Top using ¼" x 2" Allen Head Bolts.
STEP #2 - First fasten the Cross Support to the Base using
3" Screws. Second fasten the two Footrests to
the Upright using 3" Screws (Bar and Counter
height only).
STEP #3 - First fasten the second Base to the aluminum
frame of the Top using ¼" x 2" Allen Head
Bolts. Second fasten the Cross Support and
Footrests to the Base using 3" Screws.
STEP #4 - First fasten the Braces to the Top using 1½"
Screws. Second fasten the Braces to the Upright
using 1½" Screws.
Your 44" Square Table is complete!
Umbrella
Knobs
¼" x 2" Allen Head Bolts
Cross Support
Footrest
3" Screws
3" Screws
¼
" x 2" Allen Head Bolts
1½" Screws (circled)
www.Poly-lumber-Furniture.com
Toll Free 1-877-904-1234