Prime LS100 User manual

1
LTE Tracker
Prime LS100 User Manual
Revision: 1.00
Document Title
Prime LS100 User manual
Version
1.00
Finale Date
2020-03-26
Status
Released
Document Control ID
TRACKER Prime LS100

2
Contents
1 Introduction ...................................................................................................................................3
2 Product Overview...........................................................................................................................3
2.1 Appearance .........................................................................................................................3
2.2 Buttons Interface Description .............................................................................................4
2.3 LED Description...................................................................................................................5
3 Getting Started...............................................................................................................................6
3.1 Parts List..............................................................................................................................6
3.2 Built-in Battery ....................................................................................................................6
3.3 Prime LS100 Adapter...........................................................................................................7
3.4 Power on/Power off............................................................................................................8
4 Frequency.......................................................................................................................................8
5 Trouble shooting and Safety info ...................................................................................................9
5.1 Trouble shooting.................................................................................................................9
5.2 Safety info............................................................................................................................9

3
1 Introduction
Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It
works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule
tracked by backend server or specified terminals. Based on the embedded wireless tracking
protocol, Prime LS100 can communicate with the backend server through LTE network, and
transfer reports of emergency. Service provider is easy to setup their tracking platform based on
the functional wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in
alerting state. The BLE function will be activated and scan the third-party BLE data or Beacon
broadcast by custom setting or protocol.
RF 433MHz is used as a supervised short range RF communication link between the unit and
the Base Station to determine if they are no longer in range with each other.
2 Product Overview
2.1 Appearance
Figure 1-1

4
2.2 Buttons Interface Description
Button /USB Interface Description
KEY/interface
Description
Reset Key
Power off the Prime LS100
Adapter
Connected to a Power supply socket can power on Prime LS100
Function Key
SOS mode
Feature Key
Play to do list audios.
TEST Key
Test mode

5
2.3 LED Description
Figure 1-2
There are 3 LED lights in Prime LS100 device, the description as following.
Light
Event
State
Function Key LED
Function Key pressed
Solid when pressed
Feature Key LED
Feature Key pressed
Solid when pressed
Test Key LED
Test Key pressed
Solid when pressed
Breath Light
Test Key long press
Breath effect

6
3 Getting Started
3.1 Parts List
Name
Picture
Remark
Prime LS100 Base
Station
The LTE Base Station.
Prime LS100
adapter
It used to power on the Prime
LS100.
3.2 Built-in Battery
The following items are suggestion for built-in battery usage, please pay more attention.
◆The device is Emergency call equipment, which is designed to be used by adapter
always plugged.
◆There is a 850mAh Lithium polymer battery integrated in device. The built-in
battery will only be used when the adapter unplugged.
Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device
is plugged in the power supply socket.

7
3.3 Prime LS100 Adapter
Prime LS100 base station is connected with an AC Adapter.
The adapter is used for device power on, built-in battery charging, which should be
plugged in power supply socket at any time ( by end user).
Figure 2-1

8
3.4 Power on/Power off
Figure 2-2
Power on:
◆Plug in the power adapter and power on.
Power off:
◆Unplugged the power adapter and press the Reset button.
Note: the user can not power off Prime LS100 if the adapter is plugged.
4 Frequency
LTE: Band2/Band4/Band5/Band12/Band13
WIFI::2412MHz-2462MHz
BLE:2412MHz-2472MHz
433:433.92MHZ

9
5 Trouble shooting and Safety info
5.1 Trouble shooting
5.2 Safety info
The following items are suggestion for safety use, please pay more attention.
◆Please do not disassemble the device by yourself.
◆Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even
cause the battery explosion.
◆Please do not use Prime LS100 on the airplane or near medical equipment.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
Trouble
Possible Reason
Solution
Messages can’t be
reported to the
backend server by
Mobile network.
APN is wrong. Some APN
can not visit the internet
directly.
Ask the network operator for the right
APN.
The IP address or port of
the backend server is
wrong.
Make sure the IP address for the
backend server is an identified address
in the internet.
Unable to power
off Prime LS100.
The function of power key
was disabled by
AT+GTFKS.
Enable the function of power key by
AT+GTFKS.
Battery can not be
charged
The battery has not been
used for too long time
and has been locked.
Using a external power source with 3.6V
to 4.2V DC power supply to active the
battery or apply for after sale help.

10
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated withmin
imum distance 20cm between the radiator & your body.