Pro Dunk Backstop Net User manual

1
Thank you for purchasing our Backstop Net. We try hard to ensure that our prod-
ucts are of high quality and free of manufacturing defects and of missing parts.
However, if you have any problems with your Backstop Net, such as a manufac-
Toll Free: 1.888.600.8545 Pro Dunk®
Web: www.produnk.com 22047 Lutheran Church Rd.
Tomball, TX 77377
Support: www.produnk.com/support
Read this manual all the way through before starting
assembly of your Backstop Net. Then read each step
completely before beginning installation.
Pro Dunk® Backstop Net

2
Ref. Qty. Description
A 1 Net
B 2 Female + Male Fiberglass Poles
C 2 Male Fiberglass Poles
D 1 Main Pole Mount Bracket
E 2 10mm x 3cm Hex Bolts
F 2 10mm Flat Washer
G 2 10mm Lock Washer
H 6 Metal Ground Stakes
Bill Of Materials

3
Safety Instructions
 All tools used to assemble this product
should be used in compliance with manu-
facturer’s guidelines.
 Installation of this product will require
heavy lifting and bending. Any person that
is not capable of such activity should not
participate in the installation of this product.
 If using a ladder during assemble, use ex-
treme caution and refer to the warnings
and cautions on the ladder.
 Due to the size and weight of this product,
we recommend at least (2) capable adults
are present.
 All parts and components necessary to
complete proper installation are included
within this product. Do not use parts not
included with our system. Failure to follow
this requirement could cause product mal-
function and will void warranty of this prod-
uct.
 Keep all organic materials away from parts
and components to avoid damage.
IMPORTANT
It is the responsibility of purchaser to ensure that
all assemblers and players fully comply with the
detailed instructions set forth in this product as-
sembly manual. Product assembly should be
carried out exactly as instructed and owner su-
pervision of use and installation is required to pre-
Pro Dunk® retains the right to modify this
document at any time without notice or
obligation.
Keep this installation manual as a refer-
ence for your safety and the safety of
those playing on the basketball system.
Additional copies of these safety instruc-
tions are available by calling customer
service at 1-888.600.8545 or at
www.produnk.com/support
 Check the Backstop Net System on a regular
basis to ensure that there are no signs of de-
terioration or corrosion, loose hardware, or
damaged parts. If you see any signs of dam-
age contact Pro Dunk® for replacement parts
or assistance.
 For maintenance repairs please contact a pro-
fessional. produnk.com/installers
 Failure to follow these safety instructions
could result in product malfunction, seri-
ous injury, or even death.

4
Installation Overview
In order to have safe fun and a long use of your Backstop Net, please note
and heed the following:
1) Prior to Backstop Net assembly, check the work area for any haz-
ards.
2) Immediately unpack all components and cross check against bill
of materials. Report any shortages to Pro Dunk® customer ser-
vice at 1.888.600.8545.
3) You must have a Pro Dunk® basketball system with the new 4
threaded mounting holes on the top of the main pole. You may
have to remove 4 plugs to expose these threaded holes.
4) For safety measures, have at least 2 capable persons to assist
you in assembly of your Pro Dunk® Backstop Net.
5) Parts can be ordered at www.produnk.com/parts

5
Required Tools
 (1) Crescent Wrenches
 17mm
Bolt/Nut Sizes

6
Overview/Installation
Video
Navigate to be below URL to watch our overview/installation video.
https://www.produnk.com/video/backstop_net.html

7
Assembly
1) Bracket Installation
Using the provided hardware attach the Pole Bracket to the back of your main pole utilizing
the top 2 holes in the back of your main pole.

8
2) Pole Assembly
Take 1 pole with a female end and male end and 1 pole with just a male end and connect
these as shown below.
Repeat this step for the second set of poles.

9
3) Slide Poles Into Net Sleeves
Slide both set of poles through the top of net as shown below.
4) Attach Poles to Main Pole Mount Bracket
Screw each side of the net into the Main Pole Mount Bracket as shown below.

10
5) Staking Net Into Ground
Using the provided Metal Ground Stakes secure the net to the ground.

11
6) Maintenance
Like any piece of hardware, proper maintenance is required. Several factors such as
the environment, organic materials, herbicides, pesticides, excessive use or misuse
can eventually cause the Backstop Net to require maintenance. Failure to do so
could result in system failure, property damage, or even personal injury.
1) All organic materials should be kept away from the Backstop Net System at all
times.
Examples: grass clippings, moisture, garbage, dirt, etc.
7) Routine System Inspection
Before each use inspect the entire system for any signs of loose nuts and bolts, any
excessive wear and tear, any signs of rust or corrosion.
If replacement parts are needed you can contact Pro Dunk® directly or navigate to
www.produnk.com/parts to purchase parts for your Backstop Net. Only parts pro-
vided by Pro Dunk® should be used for repair. Not doing so could cause the system
to fail resulting in injury or death and voids the limited warranty.
4/24/2020

12
Hoops Inc. Backstop Net Limited 90 Day Warranty
Hoops Backstop Net systems are warranted to the original purchaser to be free from defects in material or workman-
ship for 90 days of ownership by the original retail purchaser. The word “defects” is defined as imperfections that im-
pair the use of the product.
Warranty Fulfillment
Merchandise must be shipped prepaid with a copy of proof of purchase to Hoops Inc. for examination to see whether it
needs to be repaired or replaced. Any labor costs, travel expenses and any other changes involved in the removal,
installation or replacement of the defective/repaired parts from/to your Hoops Backstop Net system will be your (the
purchaser's) responsibility. Shipping charges for replaced or warranted merchandise being sent back to the customer
must be prepaid by the customer in advance. If not, the replacement shipment will be sent out collect. Hoops Inc. re-
serves the right to examine photographs or physical evidence of merchandise claimed to be defective, and to recover
said merchandise, prior to authorization of warranty claims.
What is not covered by this warranty
This warranty does not cover defects or damage due to improper installation, shipping, handling, alteration, accidents,
vandalism, weather conditions (rusting), exposure to corrosives, negligence, misuse (anything other than a type of
basketball activity or related contact with the unit), scratching, scuffing or any event beyond the control of the Hoops
Inc.. If unit is not maintained as stated in the user manual the warranty will be void.
Liability
Hoops Inc. shall not be liable for indirect, special, or consequential damages arising out of or in connection with the
use or performance of the products or other damages with respect to any economical loss, loss of property, loss of
enjoyment of use, costs of removal, installation or other consequential damages for breach of any expressed or im-
plied warranty on these products.
Guidelines
Keep your proof of purchase (original retail purchaser). Without it, we will not be able to proceed with any warranty
service.
Call
1-888-600-8545 / Warranty Dept.
Write
Hoops Inc.
Attn: Warranty Dept
22047 Lutheran Church Rd.
Tomball TX 77377
Email
[e-mail]
For the most up to date warranty information please navigate to www.produnk.com.