Pro-Lift G5ZL User manual





ThankyouforpurchasingaPro‐LIFTG5Z.ThePro‐LIFTproductlineisdesignedtoenhanceyour
interactivewhiteboardsandprojectorsorLCD.Pleasefollowallassemblyinstructionscorrectlyto
provideoptimaluse.
OnlyaqualifiedcontractorshouldinstallthePro‐LIFTG5Z.Ifyoudonotunderstandanyoftheassembly
instructions,pleasecontactyourlocalre‐sellerorvisitwww.proliftstand.com.
IMPROPERINSTALLATIONCANCAUSEDAMAGETOYOURPro‐LIFTANDLEADTOSERIOUSPHYSICAL
INJURY.JOROManufacturingcannottakeanyresponsibilityfordamageorinjuryresultingfrom
improperinstallation.
DonotoperatePro‐LIFTG5Zifthereareanyobstructionsbeloworabovethe
board.Doingsomaycauseunitmalfunctionorleadtoseriousphysicalinjury.
ThesuppliedmountinghardwareisforuseonthePro‐LIFTstandsonly.Ifyouencounteranyproblems
orinsufficienthardwareduringinstallation,pleasecontactyourlocalre‐seller.

5/16" Washer
8x
Thread-Cutting Screw (8-32 x 1/2" Lg.)
3x
12x
M6 x 14mm Socket Cap Screw
ProLift G5ZL ASSY Instructions : 2.002
3/16" Allen (Hex) Key
1x
5/16 Hex Nut
4x
JORO Button Head
6x
5/32" Allen (Hex) Key
1x
Tube End Cap
4x
G5ZL LCD Mount Fastener Kit V1.0
G5ZL Main Frame Kit V1.0
3/16" Allen (Hex) Key
1x
1x
Nylon Cable Clip 5/16''
8x
M6 x 14mm Socket Cap Screw
2x
Cable Clamp - 1-1/2"
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

Mount the Pro-LIFT G5Z Feet
Do NOT over tighten
ProLift G5ZL ASSY Instructions : 2.002
M6 x 14mm Socket Cap Screw
Use the M6 x 14mm Socket Cap Screws provided
AIMWCASTER
1
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

Use the JORO Button Heads provided
ProLift G5ZL ASSY Instructions : 2.002
JORO Button Head
Thread-Cutting Screw (8-32 x 1/2" Lg.)
Thread-Cutting Screw (8-32 x 1/2" Lg.)
Cable Clamp
Thread-Cutting Screw (8-32 x 1/2" Lg.)
Cable Clamp
Use the Thread-Cutting Screw (8-32 x 1/2" Lg.)s provided
M6 x 14mm Socket Cap Screw
JORO Button Head
Use the JORO Button Head provided
Use the M6 x 14mm Socket Cap Screw provided
G5Z Handle
Mount the Power Bar
Do NOT over tighten
Mount the Handle to Main Frame
Mount the Cable Clamps
Repeat for other side
Do NOT over tighten
2
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

G5Z-ACC-LUPR RIGHT
G5Z-ACC-LUPR LEFT
5/16x1" SILVER Button Head
5/16x1" SILVER Button Head
Remove the 5/16x1" SILVER Button Head screws and unhook the
Pro-LIFT LCD ARM
Pro-LIFT LCD ARM
Pro-LIFT LCD ARM
Do NOT misplace the 5/16x1" SILVER Button Head screws
ProLift G5ZL ASSY Instructions : 2.002
3
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

ProLift G5ZL ASSY Instructions : 2.002
G5Z-ACC-LUPR RIGHT
G5Z-ACC-LUPR LEFT
Do NOT over tighten
Mount the Pro-LIFT G5Z-ACC-LUPR
M6 x 14mm Socket Cap Screw
G5Z-ACC-LUPR RIGHT
Use the M6 x 14mm Socket Cap Screws supplied
4
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

300 VESA 800 VESA 600 VESA 400 VESA 200 VESA 200 VESA 400 VESA 600 VESA 800 VESA
1000 VESA 1000 VESA
300 VESA
Use the appropriate fasteners as specified in the LCD owners manual
Do NOT over tighten
****NOTE: You may have to use a combination of fasteners and spacers
to achieve correct length. You may also have leftover parts.
LCD Fastener from
LCD TV Kit provided
G5-ACC-VS1000
G5-ACC-VS1000
Fasten the G5-ACC-VS1000 to your LCD (not included) using the
fasteners from the LCD TV Kit
ProLift G5ZL ASSY Instructions : 2.002
Please use the appropriate mounting holes for your
LCD (not included) as shown above
5
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

ProLift G5ZL ASSY Instructions : 2.002
G5-ACC-VS1000
ARM2025 G5ZL-600V
5/16 Hex Nut
1/4" Washer
ARM2025 G5ZL-600V
5/16 Hex Nut
1/4" Washer
G5-ACC-VS1000
DO NOT COMPLETELY TIGHTEN! Allow for ARM2025 G5ZL-600V alignment
1/4" Washer
5/16 Hex Nut
1/4" Washer
1/4" Washer
1/4" Washer
Use the fasteners supplied
Mount the Pro-LIFT LCD Arms prior to hanging on the Pro-LIFT G5Z main frame
Mount the Pro-LIFT LCD Arms to the G5-ACC-PT5 tubes
6
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

Be sure to hang on all four (4) pins on angles
Hang the LCD assembly
G5Z-ACC-LUPR RIGHT
G5Z-ACC-LUPR LEFT
Angle
ProLift G5ZL ASSY Instructions : 2.002
G5Z-ACC-LUPR LEFT
7
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

ProLift G5ZL ASSY Instructions : 2.002
Use the 5/16x1" SILVER Button Head Screws that were removed earlier
Tighten all 5/16x1" SILVER Button Heads
Secure Pro-LIFT LCD Arms to G5ZL Uprights (Repeat for other side)
Do NOT over tighten
5/16x1" SILVER Button Head
5/16x1" SILVER Button Head
8
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com

