pro master LED120 User manual

LED Light Panel
LED120
Thank you for purchasing the PROMASTER®LED120 Light Panel.
Please read the following instructions to ensure the best
operation of your light panel.
Installing the Batteries
Remove the battery cover from the back of the light by gently squeezing the two battery door locking tabs.
Insert 4 AA batteries (not included) as shown. Be sure the batteries are inserted with the correct polarity (+,-) as shown in the battery
compartment.
After the batteries are properly installed use the power switch to turn your light panel on or off.
Installing or Removing the Color Correction Filter
Your LED120 light is supplied with a 3300K correction filter that helps give you the best color balance when shooting under ambient
tungsten lighting. This filter is easily installed by snapping over the edge of your LED120 light. To remove, simply lift the filter off.
3300KFilter LED120 with
filter installed

Using the Camera Bracket
B A
Attach the mounting screw (A) to the tripod mount of your camcorder/camera. Slide your light into the shoe (B) of the mounting
bracket.
Specifications
Light source: 120-5mm super bright LED lamps
Beam angle: 60°
Luminance: 51 Lux @ 10’
Color rendering index: ≥85
Color temperature: 5600K
LED longevity: >10000h
Power input: AA Battery ×4
Housing size(mm): 94 x 93 x 38
Weight(g): 140
Code 7200
Made in China
www.promaster.com
Fairfield, CT 06611