Pro2 hdmi4spv2 User manual

Operating Instructions
Operating Instructions
HDMI 2.0 1x4 HDMI Splitter, HDCP2.2
Supports 3D, 4Kx2K@60Hz(YUV 4:4:4), 18G, HDR, EDID
Model: hdmi4spv2
Operating Instructions
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
Features
Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays.
Supports resolutions up to UItra HD 4Kx2K(3840x2160@60Hz YUV 4:4:4 ).
Supports four kinds of EDID handling abilities.
Supports HDCP2.2/1.4 Compliant.
Supports 36 bit Deep Color.
Supports LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master
Audio.
Support 3D.
Bandwidth 18G.
Support HDR.
Support online firmware upgrade via Micro USB Port.
Package Contents
1 x HDMI Splitter
1 x 5V/1A DC Adapter
1 x User Manual
1

Operating Instructions
SPECIFICATIONS
Operating Temperature Range
-5 to +40℃(+23 to +104℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Bandwidth frequency
18Gbps
HDCP
HDCP2.2
Input ports
1xHDMI(female)
Output ports
4xHDMI outputs(female)
Resolution outputs
up to 4Kx2K(3840x2160@60Hz YUV 4:4:4)
Dimensions(LxWxH)
150x64.2x17mm
Power consumption
W(MAX)
Transmission Distance
15m(Maximum)over standard HDMI cable/26AWG
Net Weight
245g
PANEL DESCRIPTIONS
①Indicator of HDMI input
②Indicator of HDMI output
③Indicator of Power input
④Switch to “Mixed EDID”mode
⑤Switch to “Auto EDID”mode
⑥Switch to “Copy EDID”mode
⑦Firmware port
⑧Power input
⑨HDMI output ports
⑩HDMI input port
2
Operating Instructions
EDID Introduction:
Copy EDID: output 4 is priority port
a. When output 4 is connected to one display, another display which connected to
output 4 will follow the Resolution of output 4.
b. When output 4 is disconnected, output 4 will output 4K@60Hz.
Auto: Default 4K@60Hz.
Mixed EDID: always follow the lowest resolution of the displays connected to 4 outputs
in order to support all displays show the source.
The HDCP Version is a priority to EDID, when the source is
HDCP2.2,
if the TV supports HDCP2.2, it will output 4K@60Hz,
if the TV doesn’t support HDCP2.2, it will output 1080p.
please see below table:
Input source
HDMI display
Support HDCP2.2
HDMI display
Doesn’t support HDCP2.2
HDCP2.2 4K@60Hz
HDCP2.2 4K@60Hz
HDCP1.4 1080p@60Hz
HDCP2.2 4K@24Hz
HDCP2.2 4K@24Hz
HDCP1.4 1080p@24Hz
HDCP1.4 4K@24Hz
HDCP1.4 4K@24Hz
HDCP1.4 4K@24Hz
Support HDR under copy EDID and Mixed EDID mode!
Connecting and operating
1) Connect the HDMI input source to input port of HDMI splitter.
2) Connect the HDMI splitter output ports to the displays.
3) Power up splitter, source and displays.
Connection Diagram
3