Farmnavigator K2YYYY0400 User manual

QUICK GUIDE
MMCBRFMAE010
ÑMMCBRFMAE010HÓ
ISOBUS Retrofit Cable
Code: K2YYYY0400

1. Product description
The ISOBUS Retrot Cable is ISO11783-2 compliant and can be used with a FARMNAVIGATOR
ISOBUS Virtual Terminal to allow the connection of any ISOBUS implement in non-ISOBUS
vehicles.
IBBC connector
Implement side
Cab side
Main cable
Cab socket cable
Cab socket cable
NCab socket connector
OCPC In-Cab connector
IBBC connector
Implement side
JIBBC port to implement
Cab side
KIBBC port from battery
LCPC In-Cab port
MMetal bracket
Main cable
ABattery - Negative pole eyelet
BBattery - Positive pole eyelet
CPower line fuse (70A)
DAccessories line fuse (15A)
EPower relay (70A)
FAccessory relay (15A)
GConnector to IBBC port
HProtection fuse for subkey (1A)
ISubkey wire (ACC)
1
3
2
NOTE: screws are not provided along with the metal bracket
K
LM
A
H
I
CB
D
O
N
G
F
E
J

2. Installation sequence
ATTENTION: please comply with all the safety rules before proceeding with the installation.
1. Run the cable starting from the battery towards the rear of the vehicle;
2. Fix the cable without interfering with moving parts and parts subject to high temperatures;
3. Fix the IBBC square bracket to the rear of the tractor;
4. Connect the G and N connectors to the IBBC connector in the cab side (K,L);
5. Stretch the cable towards the cabin;
6. Fix the CPC In-Cab connector (O) inside the cabin;
7. Connect the ACC wire (I) to an ignition point (+12V);
8. Check and fix the position of the relays (E,F);
9. Fix the eyelet (A) to the negative pole of the battery;
10. Fix the eyelet (B) to the positive pole of the battery.
3. Connections scheme
In-Cab cable
NL
J
G
O
O
K
A B
ISOBUS
implement
ISOBUS
implement cable
G7 Iso / G12
3
2
1
3.1 Connection to G7 / G12
In-Cab cable
(CBCYFG0200)
1.1 Content of the package
●Main Cable;
●IBBC connector;
●Metal bracket;
●Cab socket cable.
3
2
1
IBBC connector
Main cable
Cab socket cable
PIN-OUT
PIN n° Function
1Not connected
2 CAN-L
3 CAN-L
4CAN-H
5 CAN-H
6TBC-PWR
7 ECU-PWR positive
8 TBC-RTN
9ECU-PWR negative
G12
G7 Iso bracket
Pin 1
Pin 4
Pin 7

6. Technical Specifications
●Supply voltage: 11-14 Vdc;
●Operating temperature: -20°C / +60°C (-4°F / +140°F);
●Main cable from battery to IBBC connector lenght: 6 m;
●Cab socket cable from IBBC connector to CPC In-Cab connector lenght: 2 m.
4. Product conformity information
4.1 Simplied EU declaration of conformity
This device complies with the RoHS Directive 2011/65/EU, Annex II, as amended by the Delegated
Directive 2015/863/EU.
The full text of the EU declaration of conformity is available at the following internet address:
eudeclaration.avmap.it
4.2 Simplied UK declaration of conformity
This device complies with The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012 (SI 2012 No 3032) as amended by The Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Amendment)
Regulations 2019 (SI 2019 N°492).
The full text of the UK declaration of conformity is available at the following internet address:
eudeclaration.avmap.it
5. Safety Information
AvMap disclaims any liability deriving from an improper use or installation of the product in a way
that may violate the regulations and safety. It is highly recommended that the installation of the
product will be performed by a qualied maintenance technician. Consult installation/assembly
instructions to execute a correct procedure.
www.farmnavigator.com
AvMap Srl
Viale Zaccagna, 6
54033 Carrara (MS), Italy
www.avmap.it
[email protected]