PROAIM P-WKST-02 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
LT Universal Laptop Workstaon for
Tethered Shoong (P-WKST-02)
Assembly Manua l
C-Stand Clamp
6 x Locking Knobs
Base Plaorm
Curve Bracket
5 x Washer
10 x Washers
2 x Robust Legs 2 x 25mm
L-Brackets
2 x 6mm Shim Set
7/32mm, 4mm, 3mm Allen key
2 x 12mm
L-Brackets
2 x 2mm Shim
Set
2 x 1mm
Shim Set

2
 Loosen and remove the screw from the base
plaorm using a screwdriver.
 Align the side bracket to the thread on the
base plaorm and secure it correctly using a
screwdriver.
 Similarly, aach the second side bracket to
the base plaorm and ghten it with a
screwdriver.
Laptop Workstaon Setup
 Aach the robust legs by aligning them to the
threads on the side brackets, as shown in the
image.
 Remove the bolt from the C-stand clamp,
aach the clamp to the base plaorm and
ghten the bolt to secure it properly.
 Aach shims to the L-bracket as per the
height of your Laptop.

3
 Aach the 12mm L-brackets onto the Base
Plaorm, then insert the washer into the
locking knob.
 Secure the L-Brackets using locking knobs as
shown in the images.
Note: There are many holes on the Base
plaorm. You can aach the L-Brackets at any
spot according to the Laptop size.
 Slightly loosen the bolts of the C-stand
adapter.
 Mount the Base plaorm onto a Tripod or a
Light Stand.
Note: The base plaorm is compable with
laptops with a height between .375"-1", a length
between 10"-17" and a width between 7"-11".
 Loosen the bolts on the curve bracket to
remove the boom plate.

4
 Aach the Curve Bracket to the base
plaorm and ghten both together using an
Allen key.
YOUR PROAIM LT UNIVERSAL LAPTOP WORKSTATION FOR TETHERED SHOOTING
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 You can mount the workstaon on a C-Stand
via a C-stand clamp or on a tripod via Curve
Bracket.