2
Laptop Workstaon Setup
• Remove the nonslip mat from the top of the
laptop workstaon (Not Included), as shown
in the image.
• Loosen the screws from the top of the
boom adapter using the Allen key and then
remove them.
• Then aach the Proaim EDC WorkStaon
(Not Included) by sliding it into the side part.
• To aach the C-stand adapter, align it to the
threads of the Proaim EDC at the backside of
the workstaon (Not Included).
• Aer aligning, insert the bolts by matching
them with the threads at the backside of the
workstaon (Not Included) and then aach
the C-stand adapter.
EDC Box Setup
• Aer removing all the bolts from the
workstaon, remove the C-stand adapter
(Not Included).