Procon Canned Motor Pump 7000 User manual

PROCON
®
CANNED MOTOR PUMP 7000
Specification Sheet
Motor Voltage (Frequency) 230/220 (50-60 Hz / 50-60 Hz)
Motor Voltage (Frequency) 230/220 (50-60 Hz / 50-60 Hz)
Capacitor 20
μ
f
Phase Single
Speed 2880 @ 50 Hz
Power .5 HP Output Equivalent
(375 Watt)
Motor Insulation Class B; IPX4
Flow Range @ 50 Hz 46 to 440 lph
Elastomers Nitrile, EP,
Fluorocarbon, Neoprene
Maximum Inlet Water Temperature * 30°C
Maximum Operating Pressure 13.8 bar
Maximum Relief Valve Pressure 17.2 bar
Maximum Inlet Pressure 6.9 bar
Burst Pressure 68.9 bar
Maximum Dry Suction Lift for Priming with Relief Valve ** 2.00 m
Maximum Ambient Air Temperature 42°C
For applications above 42°C consult the factory
Minimum Ambient Air Temperature 4°C
For applications below 4°C consult the factory
Minimum Inlet Water Temperature 0°C Non frozen
For applications below 0°C consult the factory
Porting Configurations 3/8” NPT, G3/8-19 BSPP
Wiring Configuration - Standard
Male Plug Part # AMP 1-480702-0
Socket Part # AMP 350551-1
Female counterpart
Cap Part # AMP 1-480703-0
Pin Part # AMP 350552-1
Wiring Configuration - Alternate
* Temperatures above 30°C have not been evaluated for ETL compliance ** Not recommended for normal operation
PROCON
®
Products
Acragar Road, Mountmellick, Co. Laois Telephone: 011-353 (502)24350 Email: [email protected]
Republic of Ireland Fax: 011-353 (502) 24744 Telex: (852) 60019
“QUALITY PRODUCTS – DELIVERED ON TIME”
230 VOLT
GREEN / YELLOW (GROUND)
BLUE (NEUTRAL)
BROWN
GREEN/YELLOW (GROUND)
BROWN
BLUE (NEUTRAL)
220/230 VOLT

The CMP-7000 is only available with a built-in relief valve.
5.90kg
200mm
132mm
132mm
104mm
96.52mm
124mm
124mm
600.0
500.0
400.0
300.0
200.0
100.0
0.0
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
OUTLET PRESSURE (BAR)
CMP PERFORMANCE (230v 50Hz)
FLOW RATING AT 14 BAR
FLOW RATE (LPH @ 2880 rpm)