Progression Fitness 400 User manual

400
OWNER’S MANUAL
ASSEMBLYƎOPERATIONƎMAINTENANCE
WARRANTYƎPART ORDERING
▲CAUTION:
Exercise of a strenuous nature, as is customarily done on this equipment, should not
be undertaken without first consulting a physician. No specific health claims are made or implied as
they relate to the equipment.
IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s
manual for future reference.
MAURICE PINCOFFS CANADA 6050 Don Murie Street Niagara Falls, Ontario L2E 6 8

CUSTOMER SERVICE 1-866-978-1999 1 FLAMAN SALES LTD. ©2008
TABLE OF CONTENTS
Safety Precautions……………………………………………………… 2
Before you begin……………………………………………………….. 4
Assemb y………………………………………………………………... 5
Operation and adjustment…….………………………………………. 10
Fo ding…………………………………………………………………… 17
Parts ist…………………………............................................................... 18
Overview Drawing………………………………………………………. 21
Troub e Shooting…………………………………………………………. 23
Treadbe t Adjustment…………………………………………………….. 24
Treadmi Lubrication ……………………………………………………. 25
C eaning and Maintenance………………………………………………… 26
Training Guide ines ………………………………………………………. 28
Exercise Routine…………………………………………………………… 31
Warranty…………………………………………………………………. 33

CUSTOMER SERVICE 1-866-978-1999 2 FLAMAN SALES LTD. ©2008
IMPORTANT SAFETY INFORMATION
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL
▲CAUTION: Before starting any exercise program, it is recommended that you consult your physician.
▲WARNING: Connect this unit to a properly grounded outlet only.
▲DANGER: To reduce the risk of electric shock, always unplug the treadmill from the electrical outlet
immediately after using and before cleaning.
WARNING
To reduce the risk of burns, fire, e ectric shock, or injury to persons :
1. Use 120 volt a.c. household current on a dedicated circuit.
Grounding Instructions
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances. See diagram below for grounding methods.
2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions.
3. The use of an extension cord with this product is not recommended. If an extension cord is needed, use a short
(less than 10 feet) heavy gauge (14 gauge or better) extension cord with a three prong (grounded) plug and
receptacle.
4. Never leave the treadmill unattended when plugged in. Remove the safety key and unplug the unit from the outlet
when not in use and before removing or replacing parts.
5. Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it has been dropped,
damaged, or exposed to water. Never move the treadmill belt while the power is turned off.
6. Do not pull the treadmill by the power supply cord or use cord as a handle. Keep cord away from heated surfaces
and open flames.
7. Fitness equipment must always be installed and used on a flat surface. Do not use outdoors or near water. Do not
place the unit on a loose rug or uneven surface. It is recommended to use an equipment mat to prevent the unit
from moving while it is being used, which could possibly scratch or damage the surface of your floor. It is
recommended to have a minimum of 3 metres safe clearance on all sides of the treadmill while in use.
8. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage, covered patio or
near water.
9. Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
10. Read, understand and test the emergency stop procedure before using the treadmill (see operation and adjustment
on page 8)
11. Do not insert any objects into any openings.
12. Inspect and properly tighten all parts of the treadmill regularly.
13. Keep children and pets away from this equipment at all times while exercising.
14.Handicapped individuals should have medical approval and close supervision when using this treadmill.
15. Do not place hands or feet under the treadmill. Always keep hands and legs off of the treadmill when others are
using it.

CUSTOMER SERVICE 1-866-978-1999 3 FLAMAN SALES LTD. ©2008
16. Never turn on treadmill while standing on treadbelt. Always hold the handrails while using the treadmill. Always
return the treadmill to the slowest speed to provide for safe dismount and low speed restart.
17. To disconnect, turn all controls to the off position, then remove plug from outlet.
18.Do not attempt to raise, lower or move the treadmill until it is properly assembled. See assembly on page 5 and to
fold and move the treadmill on page 11. Care must be taken when lifting or moving the equipment, so as not to
injure your back. Always use proper lifting techniques. You must use any attachments that are not recommended
by the manufacturer.
19. Use the treadmill only for its intended use as described in this manual. Do not use any attachments that are not
recommended by the manufacturer.
20. User weight should not exceed 330lbs (150 kg).
21. Never allow more than one person on the treadmill at once.
22. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This allows your heart
rate to gradually increase and decrease and will help prevent straining muscles.
23. Never hold your breath while exercising. Breathing should remain at a normal rate in conjunction with the level of
exercise being performed.
24. Start your program slowly and very gradually increase your speed and distance.
25. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting clothing that could
become entangled with the moving parts of your treadmill. Do not walk or jog barefoot, in stocking feet or loose
fitting shoes or slippers.
26. This treadmill is intended for in-home use only. Do not use the treadmill in any commercial, rental or institutional
setting.
▲WARNING: Before beginning any exercise program consult your physician. This is especially important for
individuals over the age of 35 or persons with pre-existing health problems. Read all instructions before using any fitness
equipment. We assume no responsibility from personal injury or property damage sustained by or through the use of this
product.
SAVE THESE INSTRUCTIONS

CUSTOMER SERVICE 1-866-978-1999 4 FLAMAN SALES LTD. ©2008
Before you begin.
Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of each product
we produce, occasional errors and /or omissions do occur. In any event should you find this product to have
either a defective or a missing part please contact us for a replacement.
This product has been designed for home use only. Product liability and guarantee conditions will not be
applicable to products being subjected to professional use or products being used in a gym center.
This exercise equipment was designed and built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manua before assemb y and
operation of this machine.
Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.
MA . USER WEIGHT LIMIT 150 KGS (330 LBS)
Safety Key
Handgrip tube
Handpulse
Locking Knob
Console
Upright
Main frame
Walking belt
Wheel
Fan
Circuit breaker
On / off switch
Motor cover
Foot rail
Adjustment bolts
Speed adjusting switch
Incline adjusting switch

CUSTOMER SERVICE 1-866-978-1999 5 FLAMAN SALES LTD. ©2008
HARDWARE CHECK LIST
#94. 5/16” x15m/m
Button Head Socket Bolt (14pcs)
#102. Safety Key (1pc)
#93 Lubricant (1pc)
#96. M5 x 10 m/m
Phillips Head Screw (6pcs)
#95.5/16”x19x1.5T Curved Washer
(8pcs)
#98 M6 Allen Wrench (1pc)
##97. Combination M5 Allen Wrench &
Phillips Head Screw Driver (1 pc)
#90. 3.5x12 m/m
Self Tapping Screw (4pcs)

CUSTOMER SERVICE 1-866-978-1999 6 FLAMAN SALES LTD. ©2008
ASSEMBLY INSTRUCTION
I t will take two people to assemble your unit.
Set the treadmill in a cleared area and remove all packing material. Do not dispose of the material until
your assembly is completed. Note: The underside of your treadmill’s walking belt is coated with a
lubricant. During shipping, a small amount of lubricant may be transferred to the top of the waling belt
or the shipping carton. This does not affect the treadmill’s performance. If you notice any lubricant on
the top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non abrasive
cleaner.
For the sake of familiarizing yourself with the parts identified in the instructions, first study the
overview drawing.
Assembly only requires the included wrenches.
Step 1.
Remove the treadmill from the carton and lay it on a smooth level surface.
Step2.
Connect the Lower Computer Cable (38) to the Extension Computer Cable (37).
38
37

CUSTOMER SERVICE 1-866-978-1999 7 FLAMAN SALES LTD. ©2008
Step 3
Secure the right and left Upright (4,5) into the Frame Base with the 8pcs of 5/16”x15m/m Button Head Socket Bolts
(94) and 4 pcs of 5/16" x 19 x 1.5T Curved Washers (95). Be careful not to pinch the computer cable when
installing the Right Upright.
97 95
94
94
94
94
95
Step 4.
Install the Left Upright Cover (41) onto the Left Upright (4) and the Right Upright Cover (40) onto the Right Upright
(5). Ensure that the covers are facing the correct direction and allow them to slide down and sit at the bottom of the
uprights.
41
4
40
5

CUSTOMER SERVICE 1-866-978-1999 8 FLAMAN SALES LTD. ©2008
Step 5.
Connect the Extension Computer Cable (37) with the Upper Computer Cable (36).
37
36
Step 6.
Secure the Console Assembly (39) into the Left & Right Uprights (4,5) with the 6pcs of 5/16”x15m/m Button Head
Socket Bolts (94) and 4 pcs of 5/16" x 19 x 1.5T Curved Washers (95).
94
95
4
94
94
97
39
5
94
95

CUSTOMER SERVICE 1-866-978-1999 9 FLAMAN SALES LTD. ©2008
Step 7.
Secure the Left and Right Upright Covers (41, 40) to the Console Assembly (39) with the 4 pcs of 3.5x12m/m Self
Tapping Screws (90).
39
41 40
90
97
90
Step 8.
Install the Frame Base Caps (44,43) onto the Frame Base. Secure with 6pcs of M5x10m/m Phillips Head Screws (96).
96
44
97
43
96
NOTE: Ensure that all nuts and bolts are tightned.

CUSTOMER SERVICE 1-866-978-1999 10 FLAMAN SALES LTD. ©2008
TREADMILL OPERATION
Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply silicone
spray or other substances to the walking belt or walking board. Such substances will deteriorate the
walking belt and cause excessive wear.
How to p ug in the power cord.
GROUNDING INSTRUCTIONS.
This product must be grounded. No plug adapter should be used with this product.
▲WARNING: Improper connection of the equipment grounding conductor can result in a risk of an
electric shock. Check with a qualified electrician if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product, if it will not fit the outlet; have a
proper outlet installed by a qualified electrician. The use of an extension cord with this product is not
recommended. If an extension cord is needed, use a short (less than 10 feet) heavy gauge (14 gauge or
better) extension cord with a three prong (grounded) plug and receptacle. IMPORTANT: If the power
cord is damaged, it must be replaced with a manufacturer recommended power cord.
1. Plug the indicated end of the power cord into the socket of the treadmill. See drawing below
2. Plug the power cord into an appropriate outlet that is properly installed and gounded. See
drawing below. Important: The treadmill is not compatible with GFCI-equipped outlets.
Note: Your power cord and outlet may appear different.

CUSTOMER SERVICE 1-866-978-1999 11 FLAMAN SALES LTD. ©2008
MONITOR INSTRUCTIONS
▲CAUTION: Before operating the console, read the following precautions:
• Do not stand on the walking belt when turning on the treadmill
• Always wear the safety key
• Adjust the speed in small increments to avoid sudden jumps in speed
• To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on the
console and place only sealed water bottles in the water bottle holders.
TO OPERATE TREADMILL
▲CAUTION: To avoid injury, hold onto the handrails while mounting and dismounting the treadmill.
Hold onto the handrails and place feet on siderails before starting. Step onto the walking belt only a
slowest speed.
Before operating the console make sure that the power cord is properly plugged in and the on / off
button is on.
1. Hold onto handrail and place feet on siderails before starting treadmill. (Do not stand on
treadbelt).
2. Attach the magnet end of the safety key onto the monitor and attach the clip end of the safety key
to your clothing (ie: waistband). If you should slip or fall while exercising the safety key will pull
out of the console, shutting off the treadmill.
Choose which program you want to select, manual (P0) or pre-set (p1-p5).
Initia Disp ay:
When the power is turned on, the main display will light up showing all characters. The console will
be performing an internal test to make sure the console is operational. The display will then scroll
through three numbers, the first showing the current software version, second is how many hours the
treadmill has been in use and third is how many virtual miles the treadmill has gone. The treadmill
will then enter idle mode and show P0 MANUAL on the display, which is the starting point for
operation.

CUSTOMER SERVICE 1-866-978-1999 12 FLAMAN SALES LTD. ©2008
WINDOW DISPLAY DATA:
SPEED: Displays the current belt speed from starting at 1.0 kmph to 20.0 kmph.
TIME: Accumulates total workout time from 00:00 to 99:59.
DISTANCE: Accumulates total workout distance from 0.00 to 99.99 miles.
CALORIES: Accumulates the user’s calorie consumption during exercise. Max. Value is 9999
calories.
PULSE: Displays your current heart rate in beats per minute from 40 to 240.
♥
♥♥
♥ Icon: The heart icon blinks when a pulse is detected.
INCLINE: When lit, the display showing the elevation position from 0 to 12.
FUNCTION BUTTONS:
START: Press “START” button to start training.
STOP:
Press “STOP” button to stop training and press for 3 seconds to reset.
FAST: Press “FAST’ button to increase your speed.
SLOW: Press “SLOW” button to decrease your speed.
UP:
Press “UP” button to increase elevation position.
DOWN:
Press “DOWN” button to decrease elevation position.
ENTER:
Press “ENTER” button to select different setting parameters in STOP mode.
SELECT: Press “SELECT” button to scroll through the display workout information.
PROGRAM UP/DOWN:
Press PROGRAMUP/DOWN buttons to scroll through workout programs.
RAPID SPEED KEYS:
10 preset speed buttons to jump to a desired speed quickly. You can also press the any of the 10
buttons to start treadmill from the start-up screen. The treadmill will automatically start and
slowly increase speed to the preset number.
RAPID INCLINE KEYS: 10 preset incline buttons to jump to a desired incline setting quickly.
Quick-Start Operation:
STEP 1: Attach the Safety key to wake display up (if not already on). The main window will show the initial display:
P0.
STEP 2: Press the START button to begin belt movement after a three second count down. Use the FAST/SLOW keys to
adjust the desired speed at any time during training. Using the UP/DOWN keys to adjust the Incline at any time
during training.
STEP 3: Press the ENTER button to exchange display speed, incline, time, calories, distance and pulse.
STEP 4: To get a pulse reading, simply grasp both stainless steel pick-ups. Make sure the display is set to show Pulse,
or Scan. When the ♥ Icon is flashing that means the console is receiving a pulse. It may take a few seconds for
the display to reach the actual number.
STEP 5: While training, you can press STOP button to stop your workout or pull safety key away from its position to
shut down the computer. If you want to resume your workout, you can press START button and all previous
data will resume counting.
STEP 6: At the end of a program you can press ENTER to display the accumulated data for speed, time, distance and
calories that are memorized during training.

CUSTOMER SERVICE 1-866-978-1999 13 FLAMAN SALES LTD. ©2008
PROGRAMS
MANUALP0
STEP 1: Press Program UP/DOWN button to highlight Manual (P0) and press enter.
STEP 2: You can set count down time from 10:00 to 99:00. Press FAST/SLOW to adjust the value and then press the
ENTER button to continue to the next step. If you leave the value at 00:00, the time will count up.
STEP 3: You can set the DISTANCE to count down also. If the distance and time are both set to count down, the first one
to reach zero will end the program. Press FAST/SLOW buttons to adjust, then press ENTER. If you do not set
the distance to count down the console will count up from zero.
STEP 4: Press FAST/SLOW buttons to adjust the weight, then press enter.
STEP 5: Press START to begin the program.
STEP 6: During the program you can adjust the speed and incline by pressing “FAST/SLOW and “UP/DOWN” buttons,
or use rapid keys to jump directly to a setting.
STEP 7: Press “STOP” button to stop your workout or pull safety key away from its position to shut down the computer.
The Stop button will Pause the program the first time it is pressed. The second time will end the program.
Pressing the Stop button while setting up a program will cause the program to back up one step.
PRESET PROGRAM P1~P5
STEP 1: Press Program UP/DOWN buttons to scroll through the pre-set programs. Press Enter to select the program you
desire.
STEP 2: The first parameter is Speed. This is the maximum speed for the program. The program will change speeds
during your workout and setting the top speed makes sure the program won’t go too fast, or too slow for your
purposes. Use the Fast/Slow keys to adjust.
STEP 3: The pre-set value of time is 20:00, and the range is from 10:00 to 99:00. Press FAST/SLOW keys to modify,
and press ENTER to accept and continue to the next step.
STEP 4: Press FAST/SLOW keys to adjust the weight and press enter.
STEP 5: Press START button to begin your workout.
STEP 6: During the program you can adjust the SPEED and INCLINE by pressing “FAST/SLOW button and
“UP/DOWN” button, or use rapid keys to jump directly to a setting.
STEP 7: Press “STOP” button to stop your workout or pull safety key away from its position to shut down the
computer.

CUSTOMER SERVICE 1-866-978-1999 14 FLAMAN SALES LTD. ©2008
USER U1~U2
STEP 1: Press UP/DOWN buttons to select the program you desire.
STEP 2: The pre-set value of time is 20:00, and the range is from 10:00 to 99:00. Press FAST/SLOW buttons to modify
and then press ENTER to continue.
STEP 3: Press FAST/SLOW buttons to adjust the weight, then press enter.
STEP 4: Using the Fast / Slow keys, adjust the speed level to your desired effort for the first segment, then press Enter.
The second column will now be blinking. Repeat the above process until all segments have been programmed.
The first column will be blinking again. This is for the incline programming. Repeat the above process to
program all segments for incline.
STEP 5: Press the Start button to begin the workout and also save the program to memory.
STEP 6: During the program you can press “FAST/SLOW” button to adjust SPEED, and press “UP/DOWN” button to
adjust incline; or use rapid keys to jump to a preset level.
STEP 7: Press “STOP” button to stop your workout or pull safety key away from its position to shut down the computer.
TARGET HRC H1~H2
STEP 1: Press PROGRAM UP/DOWN buttons to select the HRC mode that you want and press enter.
STEP 2: The pre-set value of time is 20:00, and the range is from 10:00 to 99:00. Press FAST/SLOW buttons to modify
and press ENTER to continue to the next step.
STEP 3: Press FAST/SLOW button to adjust the weight and press enter.
STEP 4: Press FAST/SLOW buttons to adjust the age and press enter.
STEP 5: Press FAST/SLOW to adjust target Heart Rate, then press ENTER button to proceed to the next step.
STEP 6: Press FAST/SLOW button to modify the maximum speed. The range is from 1.0 to 20.0km. Press ENTER
button to enter next step.
STEP 7: Press UP/DOWN buttons to adjust max grade. The range is from 0 to 12. Finally press ENTER button to finish.
STEP 8: Press START to execute your program, or press START button to start training directly,
STEP 9: Press “STOP” button to stop your workout or pull safety key away from its position to shut down the computer.
Optiona : There is an Audio Input Jack on the front of the console and built-in speakers. You may plug any low-level
audio source signal into this port. Audio sources include MP3, Ipod, portable radio, CD player or even a TV or
computer audio signal. There is an audio patch cable included to and also a headphone jack for private listening.

CUSTOMER SERVICE 1-866-978-1999 15 FLAMAN SALES LTD. ©2008
SPEED PROFILE
SPEED PROFILE SPEED PROFILE
SPEED PROFILE
P.1
INCLINE PROFILE
INCLINE PROFILE INCLINE PROFILE
INCLINE PROFILE
P.1
P.2
P.2
P.3
P.3
P.4
P.4
P.5
P.5

CUSTOMER SERVICE 1-866-978-1999 16 FLAMAN SALES LTD. ©2008
U ing a Heart Rate Tran mitter
How to wear your wireless chest strap transmitter:
1. Attach the transmitter to the elastic strap using the locking parts.
2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable.
3. Position the transmitter with the logo centered in the middle of your body facing away from your chest (some people
must position the transmitter slightly left of center). Attach the final end of the elastic strap by inserting the round end and,
using the locking parts, secure the transmitter and strap around your chest.
4. Position the transmitter immediately below the pectoral muscles.
5. Sweat is the best conductor to measure very minute heart beat electrical signals. However, plain water can also be used
to pre-wet the electrodes (2 black square areas on the reverse side of the belt and either side of transmitter). It’s also
recommended that you wear the transmitter strap a few minutes before your work out. Some users, because of body
chemistry, have a more difficult time in achieving a strong, steady signal at the beginning. After “warming up”, this
problem lessens. As noted, wearing clothing over the transmitter/strap doesn’t affect performance.
6. Your workout must be within range - distance between transmitter/receiver – to achieve a strong steady signal. The
length of range may vary somewhat but generally stay close enough to the console to maintain good, strong, reliable
readings. Wearing the transmitter immediately against bare skin assures you of proper operation. If you wish, you may
wear the transmitter over a shirt. To do so, moisten the areas of the shirt that the electrodes will rest upon.
Note: he transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it
automatically deactivates when it does not receive any activity. Although the transmitter is water resistant, moisture can
have the effect of creating false signals, so you should take precautions to completely dry the transmitter after use to
prolong battery life (estimated transmitter battery life is 2500 hours). he replacement battery is Panasonic CR2032.
Erratic Operation:
Caution! Do not use this treadmi for Heart Rate Contro un ess a steady, so id Actua Heart Rate va ue is being
disp ayed. High, wi d, random numbers being disp ayed indicate a prob em.
Areas to ook for on interference:
(1) Treadmill not properly grounded - A must!
(2) Microwave ovens, T.V.’s, small appliances, etc.
(3) Fluorescent lights.
(4) Some household security systems.
(5) Perimeter fence for a pet.
(6) Loose treadmill console / upright.
WARNING!
DO NOT USE THE HEART RATE CONTROL PROGRAM IF YOUR HEART RATE IS NOT REGISTERING
PROPERLY ON THE TREADMILL’S DISPLAY!
Specia Operations of Heart Rate Functions
: All treadmills that are factory equipped with
a Heart Rate Control system have many distinct features both in the Heart Rate Control program and
during heart rate monitoring. This section will give you a more detailed background to use your
treadmill in the most effective manner.

CUSTOMER SERVICE 1-866-978-1999 17 FLAMAN SALES LTD. ©2008
FOLDING AND MOVING YOUR TREADMILL
Before folding the treadmill, ensure that the treadmill is at its lowest incline position. Turn the power
switch off, located on the front of the motor cover and unplug the power cord.
CAUTION: You must be able to safely lift 20 kg (45lbs) in order to raise and lower the treadmill.
To decrease the possibility of injury, bend your legs and keep your back straight while
you are raising or lowering your treadmill.
To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85 degrees
Fahrenheit.
Unfo ding
Hold the treadmill running deck with left hand. Pull the locking knob with your right hand and slowly
lower the treadmill running deck. The deck will lower unassisted when it reaches about waist high.
Fo ding
Lift the treadmill running deck with your left hand. Pull the locking knob with your right hand and
slowly raise the treadmill running deck until the treadmill is locked by the locking knob.
Moving
Before moving the treadmill, fold the treadmill to the stored position as described above. Hold the
handgrip tubes and carefully move the treadmill to your desired location.
To reduce the risk of injury, use extreme caution while moving the treadmill, do not attempt to move the
treadmill over an uneven surface.

CUSTOMER SERVICE 1-866-978-1999 18 FLAMAN SALES LTD. ©2008
KEY NO. PART NO.
DESCRIPTION O'TY
1 040001 Main Frame 1
2 040002 Frame Base 1
3 040003 Incline Bracket 1
4 040004 Left Handrail 1
5 040005 Right Handrail 1
6 040006 Console Support 1
7 040007 Outer Slide 1
8 040008 Inner Slide 1
9 0400009 Locking Knob Axle 1
10 040010 Bottom Motor Plate 1
11 040011 Belt Guide 2
12 040012 Running Deck 1
13 040013 Running Belt 1
14 040014 Drive Belt 1
15 040015 Front Roller W/Pulley 1
16 040016 Rear Roller 1
17 040017 Wheel Sleeve 2
18 040018 Magnet 2
19 040019 Cylinder 1
20 040020 Handgrip Foam 2
21 040021 Wire Tie Mount 5
22 040022 Motor 1
23 040023 Incline Motor 1
24 040024 Controller 1
25 040025 Speed Adjustment Switch W/Cable 1
26 040026 Incline Adjustment Switch W/Cable 1
27 040027 Handpulse W/Cable Assembly 2
27~1 040027-1 Handpulse Wire, Coiled 1
27~3 040027-3 Handpulse Assembly Top 2
27~4 040027-4 Handpulse Assembly Bottom 2
28 040028 Breaker 1
29 040029 Breaker 1
30 040030 On/Off Switch 1
31 040031 Sensor W/Cable 1
32 040032 Power Cord 1
33 040033 200m/m x 764 x 764_Connecting Wires (White) 1
34 040034 200m/m x 764 x 764_Connecting Wires (Black) 1
35 040035 100m/m x 764 x 764_Connecting Wires (Black) 1
36 040036 800m/m_ Computer Cable (Upper) 1
37 040037 1100 m/m_ Computer Cable (Middle) 1
38 040038 1100 m/m_ Computer Cable (Lower) 1
39 040039 Console Assembly 1
39~1 040039-1 Top Console Cover 1
39~2 040039-2 Bottom Console Cover 1
39~3 040039-3 Inner Console Cover 1
39~4 040039-4 Console Speaker Cover (R) 1
39~5 040039-5 Console Speaker Cover (L) 1
39~8 040039-8 Plastic Washer 6

CUSTOMER SERVICE 1-866-978-1999 19 FLAMAN SALES LTD. ©2008
PART NO.
DESCRIPTION O'TY
39~13 040039-13 Amplifier 1
39~14 040039-14 Power Cord Of Amplifier 1
39~15 040039-15 300mm_Speaker 1
39~16 040039-16 750mm_Speaker 1
39~17 040039-17 Sound Board 1
39~18 040039-18 Sound Board W/Cable 1
39~19 040039-19 Safety Switch Module W/Cable 1
39~21 040039-21 Fan 2
39~22 040039-22 Deflector Fan Grill 2
39~23 040039-23 Fan Grill Anchor 4
39~24 040039-24 3.5×32mm_Self Tapping Screw 8
39~25 040039-25 Receiver, HR Assembly 1
39~30 040039-26 3×10mm_Self Tapping Screw 14
40 040040 Right Handrail Cover 1
41 040041 Left Handrail Cover 1
42 040042 38 _Button Head End Cap2
43 040043 Frame Base Cap (R) 1
44 040044 Frame Base Cap (L) 1
45 040045 Front Transportation Wheel 2
46 040046 Rear Transportation Wheel 2
47 040047 Motor Cover Anchor 2
48 040048 Top Motor Cover 1
49 040049 Top Motor Cover Plate 1
50 040050 Front Motor Cover 1
51 040051 Foot Rail (L) 1
52 040052 Foot Rail (R) 1
53 040053 Front Foot Rail 4
54 040054 Rear Foot Rail 2
55 040055 Rear Adjustment Base (L) 1
56 040056 Rear Adjustment Base (R) 1
57 040057 Foot Pad Cap 2
58 040058 Cushion 6
59 040059 Foot Pad 2
60 040060 Sensor Rack 1
61 040061 10 x 24 x 3T _Nylon Washer(A)3
62 040062 50 x 13 x 3T _Nylon Washer (B)4
63 040063 1/2" x 1-1/4"_Carriage Bolt 2
64 040064 1/2" x 1"_Hex Head Bolt 2
65 040065 3/8" x 4"_Hex Head Bolt 1
66 040066 3/8" x92m/m_Hex Head Bolt 1
67 040067 3/8" x 1" _Hex Head Bolt 4
68 040068 3/8" x 1-1/2" _Hex Head Bolt 1
69 040069 3/8" x 45m/m _Hex Head Bolt 1
70 040070 3/8" x 2-1/2"_Thumb Head Socket Bolt 2
71 040071 5/16" x 1" _Button Head Socket Bolt 4
72 040072 M8 x 60m/m _Hex Head Bolt 1
73 040073 M8 x 65m/m _Socket Head Cap Bolt 2
74 040074 M8 x 25m/m _Flat Head Countersink Screw 8
75 040075 1/2" x 8T_Nyloc Nut 4