Project Nursery Sleepy Sloth User manual

Install Batteries
1. Useaathead
screwdrivertoopen
thebatterydooron
thebackoftheSleepy
Sloth.
2. Insert3AAbatteries
(notincluded).
3. Putthebatterydoor
backinplaceandscrew
itshut.
Position the Sloth
TheSleepySlothcomeswithabuilt-instand,pre-
installedforeasypositioningonatabletoporotherat
surface.YoucanalsomounttheSlothsecurelytoacrib
usingthestrapsontheback.
To mount the Sloth to a crib:
3. PlacetheSlothonthetoprailofthecrib.Wrapthe
strapsaroundthecribrailandfastenthemsothatthe
Slothremainssecurelyinplace.
1. RemovetheSloth’s
standbypullingit
gentlyoffthebottom
oftheSloth.
2. Unfastenthestrapson
thebackoftheSloth.
IMPORTANT: TheSleepy
Slothcomeswithadomecap
youcanusewhenyoudon’t
wanttoprojectonthewallor
ceiling.Ifyoudowanttoprojectontothewallorceiling,
removethecap.
If you’re mounting to a crib:
MakesuretheSloth’sdome
capisremoved.

Everyday Use
TheSleepySlothofferssoothingsounds,aprojector,and
agentlenightlightforyourlittleone’sbedtime.
To turn on the NIGHTLIGHT: Pressthe button.Press
againtochangetheintensityofthenightlight(low,
medium,high,andoff).Pressandholdthe buttonto
turnoffallsoundsandlights.
To turn on SOOTHING SOUNDS: Pressthe button.
Pressrepeatedlytocyclethroughthedifferentsounds
(thenalpressturnssoothingsoundsoff).Pressthe
buttontotogglethroughthevolumesettings(low,
medium,andhigh).Pressandholdthe buttontoturn
offallsoundsandlights.
To turn on the PROJECTOR: Pressthe button.Press
repeatedlytocyclethroughtheprojectorcoloroptions,
includingamulti-colormode(thenalpressturnsthe
projectoroff).Pressandholdthe buttontoturnoffall
soundsandlights.
TIP: Usetheprovideddomecaptodimtheprojectorand
maketheprojectorimagesvisibleonitssurface.
USING THE TIMER
Thebuilt-intimerautomaticallyturnsofftheprojector
andsoothingsoundsattheendoftheperiodyouset(15,
30,or60minutes).
To turn the TIMER on: Pressthe button.Theindicator
lightsontopoftheslothshowyouthelengthofthe
currenttimer.
USING THE BUMP SENSOR
TheSloth’sbellyhasabumpsensorthatbabycanuse
toturnonthebellylight,sound,and/orprojectorallby
herself.Bydefault,thebumpsensorisoff.
To turn the BUMP SENSOR on: Pressandholdthe
buttonuntiltheslothbeepsonce.
To turn the BUMP SENSOR off: Pressandholdthe
buttonuntiltheslothbeepstwice.
NOTE: Thebumpsensoractivateswiththelight,sound,
andprojectorsettingsfromthelasttimetheSleepySloth
wasturnedonandstaysonfor15minutesunlessturned
off.
Sleepy Sloth
Sound Soothing Crib Projector
Quick
Start
Guide
PNCP100QSG02