PROLiNK Hurricane 6300G User manual

Quick Installation Guide Revision 1.0
PROLiNK
PROLiNK Hurricane 6300G Hurricane 6300G
Wireless 802.11g ADSL2+ Ethernet Modem Router
Wireless 802.11g ADSL2+ Ethernet Modem Router
Package Contents
• 1 x ADSL2+ Ethernet Modem
802.11g Router
• 1 x RJ-45 straight cable
• 1 x RJ-11 DSL cable
• 1 x Power Adaptor
•1xCD
• Quick Installation Guide
• 1 x Antenna
Minimum System Requirements
• Windows 98SE/ME/
2000/XP/Vista
• MAC 9.x to 10.x
• 64 MB RAM for Win 98Se/ Me
• 128 MB RAM for Win 2K/ XP
• 64MB or 128MB RAM for Mac
• 4x speed CDROM Drive
• Ethernet Port (LAN Card)
H6300G 802.11g Wireless 4-port ADSL2+ Ethernet Modem Router Page 1 of 2 Revision 1.0 Jan 2007
© Copyright 2007 PROLiNK All Rights Reserved. PROLiNK is manufactured under the authority of FIDA INTERNATIONAL (S) PTE LTD.
All brands or product names are either trademarks or registered trademarks of their respective owners.
Step 1
Step 1 Hardware connection Hardware connection 1.1 Ensure that the PC/Notebook & ADSL Modem are power off
1.2 Connect one end of the RJ45 (Ethernet) cable to the LAN port of the computer.
1.3 Connect the other end of RJ45 cable to the ADSL Modem.
1.4 Connect one end of RJ11 (Telephone) cable to the ADSL port (marked Line)
on the ADSL Modem.
1.5 Connect the other end of RJ11 cable into the phone socket, which has the
ADSL service activated, or the ADSL port of a Micro-filter whichever is
applicable
1.6 Connect power adapter to the power socket and switch-on H6300G
1.7 PROLiNK WG2000/R Wireless LAN adapter may be installed into your
notebook/PC when you reach Step 3b
Step 2
Step 2 Configuring your Computer / Notebook Configuring your Computer / Notebook
Important! Please ensure that the PC’s Network Card TCP/IP Properties and the Internet Browser proxy are configured
It is also assumed that the computer/notebook has the Ethernet Network card installed.
Note: In case you have static IP address and you need to use this value for other network connections, make sure you write down the value first
before changing to Obtain an IP address automatically
2.1a Configure TCP/IP settings for Windows® 98SE / ME
- Windows Desktop > right click Network Neighborhood for Wins 98SE / Network Places for Win ME > select Properties
- “Network” window > click the Configuration tab > scroll down to select and double click TCP/IP > xxx where xxx refers to the model of the Ethernet
Network Card connected to the ADSL Ethernet Modem
-“TCP/IP Properties” window > select IP Address tab > select Obtain an IP address automatically > click DNS Configuration tab > click Disable DNS >
click OK
Take note that the system prompts to Restart the Computer
2.1b Configure TCP/IP settings for Windows® 2000 / XP
-Windows Desktop > right click Network Places > select Properties
-“Network & Dial-Up Connection” window > click Local Area Connection > scroll down to select and double click Internet Protocol TCP/IP
-“Internet Protocol (TCP/IP) Properties” > select Obtain an IP address automatically > select Obtain DNS server address automatically > click OK
2.2 Disable Proxy Settings
-Windows Desktop > right click Internet Explorer (IE) > click Properties
- “Internet Properties” window > click Connections tab > select Never dial a connection > click LAN Settings…
- “Local Area Network (LAN) Settings” window > remove the tick for the option for the Automatic configuration > remove the tick for option box for Proxy
server > click OK > click OK again to exit from “Internet Properties” window
Step 3
Step 3 Configuring the H6300G Modem Configuring the H6300G Modem
3a Through Ethernet LAN connection
a. Start your Web Browser > key in
http://192.168.1.254 at the URL/Address bar
b. Key in the User name: admin and Password: admin
click on the OK button
Technical Support Information
Support Hotline:
Support Email:
Address:
(65) 6296 5455
[e-mail]
Blk 105 Boon Keng Road #06-13
Kallang Basin Industrial Estate
Singapore 339776
9am – 5.45pm (Mon – Fri)
9am – 1pm (Sat)
Wireless LAN adapter
Power
Adapter
Computer
Wall
phone
socket
Telephone
(optional)
Micro
Filter
c. Click on Interface Setup > Enter the correct VPI/VCI
settings of your ISP, key in your Username: e.g. prolink@singnet and
Password: ******** (provided by your ISP), and select the correct
Encapsulation, click SAVE button to complete the setup
(For reference - VPI/VCI: Singapore= 0/100, Malaysia= 0/35, Indonesia=1/33, Sri Lanka= 8/35,
Digitel= 8/35, Innove=0/35)

© Copyright 2007 PROLiNK All Rights Reserved. PROLiNK is manufactured under the authority of FIDA INTERNATIONAL (S) PTE LTD.
All brands or product names are either trademarks or registered trademarks of their respective owners.
Step 3
Step 3 Configuring the H6300G Modem ( Configuring the H6300G Modem (ctn ctn’ ’d d) )
Configuring Macintosh Computer / Notebook
Configuring Macintosh Computer / Notebook
Important! It is assumed that the Macintosh computer has the Ethernet Adapter installed.
Note: In case you have static IP address in your Computer/Notebook and you need to use this value for other network connections make sure you
write down the value first before making the change
2. Disable Proxy Settings
•click the Apple icon on desktop > scroll
down to select System Preferences > click
on Network icon
•Under the Proxies tab:
-Removethe tick in the option box for Web Proxy
(HTTP)
- click Apply Now
1. Configure TCP/IP settings for Mac OS 9.x
(skip this section and go to section 1a if the
computer has Mac OS 10.x)
-Apple Menu > scroll down to select
Control Panels > select TCP/IP
-“TCP/IP” dialogue box > select Ethernet
from “Connect via” field > select Using
DHCP Server from “Configure” field
1.1 Configure TCP/IP settings for Mac OS 10.x
• Apple Menu > scroll down to select System
Preference > select Network
•“Preference” dialogue box > key in H6300G
Broadband in the location field > select Build-in
Ethernet in the “Show” field
• click TCP/IP tab > select Using DHCP in the
Configure IPV4 field > click Apply Now
H6300G 802.11g Wireless 4-port ADSL2+ Ethernet Modem Router Page 2 of 2 Revision 1.0 Jan 2007
Note:If you are not using PROLiNK wireless
adapter, please refer to your vendor for
installation instructions
a. Insert the wireless USB adapter driver Setup
CD into your notebook computer > click on
Driver & Utility Installation , follow the
instruction on the screen to finish the
installation
b. Insert your wireless USB adapter into the
USB slot
c. Double-click the Intelligent Wireless Utility icon
on your desktop
d. Click Site Survey tab > click Rescan > under
SSID column: select Prolink-H6300G >
click Connect > click OK
e. Ensure that your wireless connection to
Prolink-H6300G is established
f. go back to Step 3a to configure your
modem settings
d. Click on Status
i. once a WAN IP address is established, you may proceed
to surf the internet
3b Through Wireless LAN connection (for PROLiNK WG2000/R wireless LAN adapter users only)