promethean ActivPanel Adjustable Stand 400 User manual

2
3
5
4
6
Remove the cover of the height adjustment .
Lock the stand with lock screws Level vertically with feet at the bottom.
Lift the stand onto the bracket
4 x M3.5
1x
1x
Optional
Safety warnings, contents of the box, tools needed
Installation should only be performed by a Qualified Installation Professional
1
* Mounting material not included .
Carefully check the condition of the wall , which
is provided for installation and select
appropriate fastening materials . Please note
that the free-standing installation requires a
correspondingly stable wall or possibly a gain .
TP-1938-V05 ©2016 Promethean Ltd. All Rights Reserved. Products are subject to availability by country.
Product specifications are subject to change without notice.
1x
ActivPanel Adjustable Stand 400
APTASBB400-90 - for use with ActivPanels™ with a mass* of 66kg to 95kg
Installation Guide
Mount the wall bracket in a horizontal
position on the wall .
Make sure that the screws are turned
maximum to left safely.
x4
12”
16”
2x

9
Set Balance, Use Drill Driver Left/Right 5 Sec Counter Clockwise Until Balanced.
support.prometheanworld.com
8
4 x M8
Max 10 mm
Mount Wall Cover
7
ActivPanel Adjustable Stand 400
(Vesa mount shown but not included).
When mounting the
ActivPanel use
APTVMBB400 for APT2/3
variants
For APT4 onwards use the
mount included with
panel.
TP-1938-V05 ©2016 Promethean Ltd. All Rights Reserved. Products are subject to availability by country.
Product specifications are subject to change without notice.
APTASBB400-90 - for use with ActivPanels™ with a mass* of 66kg to 95kg
Installation Guide
TP-1938-V05
*Total mass of ActivPanel, VESA mount and any accessories attached to the ActivPanel™
Attach the side guards to the stand using the
Vesa mount installation points shown above.