Promolife O3Elite Safety guide

www.promolife.com
888-742-3404
How to Connect the O3Elite Ozone
Generator to the Water Bubbler/
Humidier Combo
Step 1. Remove stem from ask.
Step 2. Fill ask with desired amount of water and put stem back in
ask. If humidifying, you only need 300ml. If ozonating water, ll to
desired amount.
Step 3. Connect silicone hose with male Luer lock to Ozone Out port of
Ozone Generator.

www.promolife.com
888-742-3404
Step 4. Take opposite end of silicone tubing with no connectors and
attach to connector on middle stem (left).
Step 5. Take the 3 ft silicone hose segment that comes with the PL22
and connect to the other hose connection on the stem.
Step 6. Connect 3 ft silicone hose segment to the end port of the
Ozone Destruct.

www.promolife.com
888-742-3404
Step 7. To properly use the Destruct System while making ozonated
water or priming water for humidication, ensure the valve on the
Destruct System has the O position pointing toward the port side of
the valve.
Step 8. If using for humidifying, attach the desired application to the
side accessory port on the Destruct System. When water is primed,
switch the stopcock so the O position is pointing toward the Destruct
System.