Seville Classics UltraHD 20292 User manual

TR181024
UltraHD Adjustable Height Workbench
72 in W X 25 in D X 28.5~42 in H
ASSEMBLY INSTRUCTIONS
(Model No. 20292)
(1.82m x 63.5 cm x 72.3 cm~1.06 m)

(pg 1 of 5)
#40
#5
#6
#1

(#1) Bottom Crossbar x 1 PC
(#5) Legs x 2 PCS
PARTS LIST (pg 2 of 5)
(#3) Wood Top x 1 PC
(#2) Top Crossbars x 2 PCS
UltraHD Adjustable Height Workbench
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please refer to page 5 of 5) to send you the missing parts.
(#27-B) Washers x 24 PCS
(#25) Wrench x 1 PC
(#6) Leveling Feet x 4 PCS
(#40) Screw E (M8 x 18L) x 24 PCS

Step 1. Assemble Top Crossbars (#2)
Note:
Step 2. Adjust the Height of the Leg(#5)
Step 3. Assemble Legs (#5)
Note:
Fasten all screws after this step.
Both Legs (#5) have holes near the bottom of the
frame. Make sure all the holes are facing the back
of the unit.
UltraHD Adjustable Height Workbench (Model No. 20292) (Pg 3 of 5)
Do not fullly tighten the screws until assembling
Step 3.
Open the package, remove and place all parts to the
side. Then open the package of the Solid Hardwood
Top (#3).
Attach both Top Crossbars (#2) to the Solid
Hardwood Top (#3). Use 12 pcs Screw E (#40) with
Washers (#27-B) and Wrench (#25) to tighten.
1. Remove the Hand Knobs on each Leg (#5) , adjust
the Legs (#5) to your desired height. The Legs can
be adjusted from 28.5 in. to 42 in.
2. Insert all 4 Hand Knobs and washers back into the
leg tubes.
Attach both Legs (#5) into the tube on the Top
Crossbars (#2) as the left photo shows, line up the
screw holes, use 8 pcs Screw E (#40) and Washers
(#27-B) to tighten the legs.
Front
Back
Front Back
Front
Back
28.5"
42"
37.5"
#3 #2
#40
#27-B
#25
#5
#27-B
#40
#2

Step 4.
Step 5. Attach leveling Feet (#6)
Attach the Bottom Crossbar (#1) to the back of the
Legs (#5), line up the screw holes, use 4 pcs Screw E
(#40) with Washers (#27-B) and Wrench
(#25) to tighten.
Turn the workbench up right once you finish this step.
Insert the Leveling Feet (#6) into the Legs (#5), use
Wrench (#25) to tighten.
UltraHD Adjustable Height Workbench (Model No. 20292) (Pg 4 of 5)
Assemble Bottom Crossbar (#1)
If you want to adjust the height of the Workbench,
turn the workbench upside down. Untighten the
Hand Knobs and adjust the height.
#27-B
#40
#1
#6 #25

***Please visit our website or call and inquire about our additional UltraHD Line***
Website & Online Store: www.sevilleclassics.com
CONTACT INFORMATION (pg 5 of 5)
*If you are missing any parts, have any questions, or need additional assistance in assembly, please contact
our bilingual (English and Spanish) customer service department at:
Seville Classics, Inc.
19401 South Harborgate Way
Torrance, CA 90501
USA
Telephone: [phone] within USA
Hours: 9:00am - 4:30pm (Pacific Standard Time)
Fax: [phone]
E-mail: [e-mail]
UltraHD Line
Model No. 16238
UltraHD Storage Cabinet
Model No. 16236
UltraHD Storage Cabinet
Model No. 20227
UltraHD Rolling Cabinet
Model No. 20294
UltraHD 4-Door Locker Cabinet

Model No. 20217
UltraHD Trash Bin
Model No. 20184
UltraHD Rolling Drawer Cabinet
UltraHD Line
Model No. 20262
UltraHD Rolling Workbench
Model No. 20283
UltraHD Mobile Table
Model No. 20230
UltraHD Wall Cabinet