Providence DUAL BASS STATION User manual

DUAL BASS STATION DBS-1
株式会社

DUAL BASS STATION DBS-1
OWNER’S MANUAL
Thank you for choosing Providence. In order to take full advantage of the product’s features and performance, please read this
manual thoroughly and keep it in a safe place for future reference.
■Main Features
●The Dual Bass Station is a high-performance bass preamplifier with dual inputs and EQ channels. With a single bass guitar plugged into the IN-A input you can
switch between the A and B channel EQ settings as required. Both channels feature versatile 3-band equalizers that are ideal for use with a wide range of musical
genres and playing styles. The parametric midrange controls allow detailed tonal adjustment.
●Great care has been taken in the selection and implementation of all signal-carrying parts and circuitry, achieving overall specifications and sonic per-
formance that rival high-end audio equipment. The internal circuitry is powered by a 24-volt supply, allowing the expressive dynamic range of bass guitar
to come through with maximum impact and clarity.
●EQ controls employ precision potentiometers with a control curve that has been specially designed for maximum subjective linearity.
Boosts or cuts the bass frequency range. Response is flat (no boost or cut) at the center
click position.
Boosts or cuts the mid-frequency range. The center frequency of the mid-frequency
range is set via the corresponding MID FREQ control. Response is flat (no boost or cut)
at the center click position.
Boosts or cuts the treble frequency range. Response is flat (no boost or cut) at the cen-
ter click position.
Adjusts the output level. At the center click position the output level is approximately
equal to the input level.
Sets the center frequency of the mid-frequency range that will be affected by the corre-
sponding MID control.
ights (red) when output from the OUT jack has been muted via the MUTE footswitch.
ights (green) when the A channel has been selected via the A/B footswitch.
ights (orange) when the B channel has been selected via the A/B footswitch.
Alternately mutes and un-mutes output from the OUT jack.
Alternately selects the A or B channel.
This is the input jack for channel A. The output from a bass guitar or other effect unit
should be connected here.
When no plug is inserted into the IN-B jack (below), the signal fed to the IN-A jack is routed
to both the A and B channels so you can set up two different EQs and switch between
them as required. When using a single bass guitar, always connect it to the IN-A connector.
The IN-B jack can be used to connect a second bass guitar to the DBS-1. When instru-
ments are connected to both the IN-A and IN-B jacks, the instrument connected to IN-A
will go through channel A, and the instrument connected to IN-B will go through chan-
nel B.
Connect to an external tuner when required. The TUNER output jack is active even
when the main output is muted. When two instruments are connected to the DBS-1 the
signal from the channel selected by the A/B footswitch will be output via the TUNER
jack. The input signal is fed directly to the TUNER jack without being affected by any of
the DBS-1 EQ or level controls.
Outputs the processed signal from the DBS-1 to an amplifier or mixer.
The DC output from the supplied AC adaptor should be connected here.
■Specifications
• Controls: Independent BASS, MID, MID FREQ, TREB E, and MASTER for the A and B channels. MUTE and A/B footswitches.
• Connectors: ¼ inch phone jacks (IN-A, IN-B, OUT, TUNER), DC 12V input connector.
• Electrical characteristics: BASS 60Hz±14dB peaking/MID 150Hz~1kHz±14dB peaking/TREB E 3kHz±14dB peaking/MASTER -∞~+10dB/
Output noise level -95dBu or less (IHF A.W.T.D)/Harmonic distortion 0.01% or less (Output 0dBu)
• Power consumption: DV12V 80 mA max.
• Power supply: Supplied AC adaptor (PAP-712DCJ for North America and Japan, PAP-712DCE for Europe, PAP-712DCU for UK).
• Dimensions (D x W x H): 125 x 95 x 53 mm.
• Weight: Approx. 370 grams (not incl. AC adaptor).
■Controls and Connectors
■Precautions
• Do not insert or remove plugs into or from the unit’s input jacks while it is connected to an active amplifier
that is connected to speakers. Doing so can generate high-level noise and possibly damage the speakers.
• In case of damage or malfunction, cease operation immediately and contact the manufacturer or the
dealer from which you purchased the product.
*Appearance and/or specifications may be changed without notice in order to improve performance or
meet regulations.
This manual suits for next models
1
Table of contents
Popular Music Equipment manuals by other brands

Audio Control
Audio Control Phase Coupled Activator Three Series Owner's enjoyment manual

PSP Audioware
PSP Audioware PSP oldTimer Operation manuals

PowerAcoustik
PowerAcoustik BASS-12 owner's manual

SONIC COUTURE
SONIC COUTURE Morpheus user guide

BOSSCO
BOSSCO ROD-10 instructions

BOSSCO
BOSSCO Dr. Beat DB-88 owner's manual