Tascam CD-BT2 User manual

»
CD-BT2
Portable CD
Bass Trainer
D00997220A
OWNER’S MANUAL
This device has a serial number
on the rear panel. Please record
it and retain it for your records.
Serial number:
__________________

IMPORTANT SAFETY INSTRUCTIONS
3TASCAM CD-BT2
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR
MOISTURE.
TO THE USER
This equipment has been tested and found
to comply wi th the limi ts for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide re asona bl e pr ote ctio n ag ai ns t
h a r m f u l i n t e r f e r e n c e i n a r e s i d e n t i a l
installation. This equipment generates,
uses , an d ca n radiate radio f re quency
energy and, if not installed and used in
accordance with the instruction manual,
may cause harmful interference to radio
commu nications. Howeve r, there i s no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or t e lev i s i o n recept i o n, wh i c h c a n b e
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the
equipment and receiver.
c) Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
d) Consult the dealer or an experienced
radio/TV technician for help.
CAUTION
C h a n g e s o r m o d i f i c a t i o n s t o t h i s
eq uip me nt no t expr e ssl y app rove d by
TE AC CO R P O R AT I O N fo r c o m p l i a n c e
could void the user's authority to operate
this equipment.
FOR U.S.A.

4TASCAM CD-BT2
IMPORTANT SAFETY PRECAUTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8 Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet.
10 Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11 Only use attachments/accessories
specified by the manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long
periods of time.
14 Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as power-supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.Do not expose this appara-
tus to drips or splashes.
D o n o t p l a c e a n y o b j e c t s f i l l e d
with liquids, such as vases, on the
apparatus.
Do n o t i ns ta ll t h i s ap pa ra tu s i n a
confined space such as a book case or
similar unit.
T h e a p p a r a t u s d r a w s n o m i n a l
non- o p e rating power from the AC
outlet with its STANDBY/ON in the
Standby position.
The apparatus should be located close
enough to the AC outlet so that you
can easily grasp the power cord plug
at any time.
An apparatus with Class I construction
shall be connected to an AC outlet with
a protective grounding connection.
Batteries ( batter y pack or batteries
installed ) should not be exposed to
excessive heat such as sunshine, fire
or the like.
E x c e s s i v e s o u n d p r e s s u r e f r o m
earphones and headphones can cause
hearing loss.
•
•
•
•
•
•
•

IMPORTANT SAFETY INSTRUCTIONS
5TASCAM CD-BT2
SAFETY INFORMATION
This product has been designed and manufactured according to
FDA regulations “title 21, CFR, chapter 1, subchapter J, based
on the Radiation Control for Health and Safety Act of 1968,” and
is classified as a class 1 laser product. There is no hazardous
invisible laser radiation during operation because invisible laser
radiation emitted inside of this product is completely confined in
the protective housings.
The label required in this regulation is shown at 1.
The CD-BT2 uses either a SONY or a SAMSUNG transport.
Optical pickup:
Type: KSM-900AAA
Manufacturer: SONY Corporation
Laser output: Less than 1 mW on the objective lens
Wavelength: 775 to 816 nm
Type: CMS-M93BG6
Manufacturer: Samsung Electro-Mechanics Co., Ltd.
Laser output: Less than 0.4 mW on the objective lens
Wavelength: 760 to 800 nm
CAUTION
• DO NOT REMOVE THE PROTECTIVE HOUSING USING A
SCREWDRIVER.
• USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
• IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR
NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT
USE THE PRODUCT IN ITS DAMAGED STATE.
• CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. DO NOT VIEW DIRECTORY WITH
OPTICAL INSTRUMENTS.
DTA

6TASCAM CD-BT2
IMPORTANT SAFETY PRECAUTIONSContents
Introduction ..........................................................................................7
Features of this device.........................................................................7
Using this manual ...............................................................................7
Accessories .......................................................................................7
About this manual...............................................................................8
Environmental considerations..............................................................8
Beware of condensation..................................................................... 8
Cleaning the unit.................................................................................8
Handling of compact discs...................................................................9
Batteries ...........................................................................................10
Inserting batteries........................................................................... 10
Quick Start Guide—Basic Operation.............................................11
Preparation ......................................................................................11
Playback ...........................................................................................12
Playing bass .....................................................................................13
Turning off the power .......................................................................14
Restoring all settings to original values .............................................14
About Power.......................................................................................15
Using batteries .................................................................................15
Operation with an AC adapter ..........................................................15
Turning the power ON and OFF ........................................................16
Names and functions of parts .........................................................17
Control panel ...................................................................................17
Front ................................................................................................19
Rear .................................................................................................19
Making connections......................................................................... 20
Screen appearance and operation..................................................21
Screen overview ...............................................................................21
TIME DISPLAY screen ...................................................................... 21
Other screens ................................................................................ 22
Making settings ............................................................................... 23
Listening to CDs.................................................................................24
Basic CD playback ............................................................................24
Jumping back a few seconds (FLASH BACK) .....................................24
Adjusting the volume .......................................................................25
Changing the tempo..........................................................................25
Changing the pitch with the tempo ..................................................26
Changing only the pitch ....................................................................26
Using the bass enhancement effect...................................................27
Loop playback...................................................................................28
Selecting the play mode ................................................................... 29
Repeat playback............................................................................... 29
Using a bass with the trainer.......................................................... 30
Adjusting the input level .................................................................. 30
Adjusting the monitoring volume .................................................... 30
Playing along with a CD ................................................................... 30
Using built-in effects ........................................................................31
Other functions ..................................................................................33
Using the metronome .......................................................................33
Stopping the metronome ................................................................. 34
Using the tuner .................................................................................35
AUTO (chromatic tuner) ................................................................... 35
BASS (bass tuner mode) .................................................................. 36
OSC. (oscillator mode) .................................................................... 36
Using a footswitch ............................................................................37
Connecting a footswitch .................................................................. 37
Setting the function ........................................................................ 37
Setting the polarity ......................................................................... 37
Making various settings .................................................................. 38
Mono monitoring ............................................................................ 38
Splitting the CD and bass output ..................................................... 38
Setting the time display ................................................................... 39
Changing the display contrast ......................................................... 39
Restoring all settings to their default values .................................... 39
Specifications..................................................................................... 40
Effect preset list .................................................................................41
Effect module parameter list ...........................................................42

IMPORTANT SAFETY INSTRUCTIONS
7TASCAM CD-BT2
Introduction
Thank you for purchasing the TASCAM CD-BT2.
This CD player allows you to change the playback speed of
recorded music without changing its pitch, making it ideal
for bass practice. If you are trying to learn a part that is too
difcult to catch at ordinary playback speed, you can use this
player to slow the playback to a speed that makes learning the
notes easier. You can also plug your bass into the unit and mix
your own playing with music from a CD.
Features of this device
CD player functions
Change playback speed without changing pitch
Change pitch without changing playback speed
Reduce, increase or emphasize the recorded bass sound
during CD playback
Loop playback of passages that you select
Other functions
Operates with batteries (4 AA) or an AC
adapter (sold separately)
Bass effects built-in
Play along on bass as you listen to a CD
Tuner built-in
Metronome built-in
Headphone jack and line output jack
Operate with a footswitch (sold separately)
•
•
•
•
•
•
•
•
•
•
•
Using this manual
This manual includes a Quick Start Guide and reference
chapters.
The Quick Start Guide explains the basics, from preparation
and standard CD playback to the use of effects, in a step-by-
step manner. Read this when you want to use the CD-BT2
after purchase. Please note that not all functions are explained
in this section.
The reference chapters explain the use of every control key
and all the CD-BT2 functions in detail. It also includes speci-
cations and other information. Please read this part because
it also has cautionary warnings and other important details
about using the unit.
Accessories
Owner’s Manual (this manual) ...........................................1
Warranty card .....................................................................1
Troubleshooting guide ........................................................1
Please contact TASCAM if any of these items are missing.
•
•
•

8TASCAM CD-BT2
About this manual
When we refer to a key or connector or control on the CD-
BT2, the typeface looks like this: PLAY.
When we refer to items shown on the display, the typeface
looks like this: MENU.
Environmental considerations
The CD-BT2 may be used in most places, but you should
observe the following environmental conditions to maintain
top performance and prolong operating life:
The nominal temperature should be between 5°C and 35°C
(41°F and 95°F).
Relative humidity should be 30 to 90 percent.
As the unit may become hot during operation, always
leave sufficient space above the unit for ventilation. Do not
install this unit in a confined space such as a bookcase, and
do not put anything on top of the unit.
Avoid installing this unit on top of any heat-generating
electrical device such as a power amplifier.
Make sure that the unit is mounted in a level position for
correct operation.
•
•
•
•
•
Beware of condensation
If the unit (or a compact disc) is moved from a cold to a warm
place, or used after a sudden temperature change, there is a
danger of condensation. Vapor in the air could condense on
the internal mechanism, making correct operation impossible.
To prevent this, or if this occurs, let the player sit for one or
two hours at the new room temperature before using.
Cleaning the unit
Wipe dirt from the unit with a dry cloth. Never use thinner,
benzene or other solvents because they may cause acrylic parts
and coated surfaces to dissolve, labels to be eroded or other
damage.
Introduction

IMPORTANT SAFETY INSTRUCTIONS
9TASCAM CD-BT2
Handling of compact discs
The CD-BT2 has been designed for the playback of CD-DA
(standard audio) format discs. In addition to ordinary 5-inch
and 3-inch CDs, it can also play properly recorded CD-R and
CD-RW discs.
Always insert a compact discs into the unit with its label
facing upward.
To remove a disc from its case, press down on the center of
the disc holder, then lift the disc out, holding it carefully by
the edges.
Avoid getting fingerprints on the signal side (the non-label
side). Grime and dust may cause skipping, so keep discs
clean and store them in their cases when not being played.
To clean the signal side of a disc, wipe gently with a soft
dry cloth from the center towards the outside edge.
Do not use any record spray, anti-static solutions, benzene,
paint thinner or other chemical agents to clean CDs as they
•
•
•
•
could damage the delicate playing surface. It may cause
CDs to become unplayable.
Discs should be returned to their cases after use to avoid
serious scratches that could cause the laser pickup to “skip.”
Keep discs away from direct sunlight and places of high heat
and humidity. If left in such places, warping could result.
Do not affix any labels or stickers to the label side of the
disc. Do not write on the disc with a ballpoint pen.
Do not insert discs that have adhesive remaining from tape
or stickers that have been removed. If they are inserted
into the player, they could stick to the internal mechanism,
requiring removal by a technician.
Do not use cracked discs.
Only use circular compact discs. Avoid using promotional,
discs and other discs that are not circular.
The CD-BT2 cannot play unfinalized CD-R/RW discs.
Music discs with copy control, a copy-protection system,
have been released from several record companies in an
attempt to protect their copyrights. Since some of these
discs do not comply with the CD specifications, they might
not be playable on the CD-BT2.
•
•
•
•
•
•
•
•
Introduction

10 TASCAM CD-BT2
Batteries
If batteries are used improperly, or if leakage or breakage
occurs, the unit will not function.
Please observe the cautions indicated on the batteries and their
packaging to ensure proper usage.
Confirm + and – polarity and follow the indications when
inserting new batteries into the unit.
Do not use old and new batteries together.
Even if batteries are the same size, their voltage may differ.
Do not use batteries of different specifications together.
Do not attempt to recharge batteries that are
non-rechargeable.
Do not open or disassemble batteries, throw them into a
fire or put them in water.
•
•
•
•
•
Inserting batteries
1 Open the lid.
2 Confirm +/- polarity, and insert four AA batteries.
3 Close the lid.
NOTE
This device does not include batteries when purchased.
We recommend nickel hydride or alkaline batteries.
Introduction