Proximus P16-41438 User manual

4 Channel Security Kit
With 4 Night Vision Cameras
P16-41438
User’s Maual
All brand names and trademarks are properties of their
respective owners.

TABLE OF CONTENTS
FCC RADIATION NORM:.................................................................................................................................................2
PACKAGE CONTENTS:..................................................................................................................................................3
SYSTEM REQUIREMENTS:............................................................................................................................................3
SAFETY INSTRUCTION:.................................................................................................................................................4
CHAPTER 1: DVR FEATURES........................................................................................................................................5
CHAPTER 2: LAYOUT.....................................................................................................................................................6
2.1 FRONT PANEL (PLEASE REFER TO ACTUAL PRODUCT FOR DETAIL)..............................................................................6
2.2 REAR PANEL (PLEASE SEE ACTUAL PRODUCT FOR DETAIL) ........................................................................................7
2.3 REMOTE CONTROL....................................................................................................................................................8
2.4 MOUSE OPERATION ..................................................................................................................................................9
CHAPTER 3: DVR/CAMERA INSTALLATION..............................................................................................................10
3.1 CONNECTING THE DVR TO A TV OR MONITOR..........................................................................................................10
3.2 CONNECTING THE POWER SUPPLY...........................................................................................................................10
3.3 CONNECTING THE CAMERAS....................................................................................................................................10
CHAPTER 4: DVR START UP.......................................................................................................................................11
4.1 SYSTEM INITIALIZATION ...........................................................................................................................................11
4.2 MAIN INTERFACE.....................................................................................................................................................11
CHAPTER 5: DVR MENU AND OPTIONS ....................................................................................................................12
5.1 MAIN MENU PREVIEW..............................................................................................................................................13
5.2 MAIN MENU ............................................................................................................................................................14
5.2.1 Playback Functions.....................................................................................................................................14
5.2.2 Record..........................................................................................................................................................15
5.2.3 Hard Disk Management...............................................................................................................................16
5.2.4 Basic Setups................................................................................................................................................17
5.2.4.1 Language............................................................................................................................................................... 17
5.2.4.2 Date/Time............................................................................................................................................................... 17
5.2.4.3 Password............................................................................................................................................................... 17
5.2.4.4 Display ................................................................................................................................................................... 18
5.2.4.5 Video/Audio........................................................................................................................................................... 18
5.2.5 Advanced Setups ........................................................................................................................................18
5.2.5.1 Alarm...................................................................................................................................................................... 18
5.2.5.2 Info ......................................................................................................................................................................... 19
5.2.5.3 MD (Motion Detect) ............................................................................................................................................... 19
5.2.5.4 Mobile..................................................................................................................................................................... 19
5.2.5.5 MAINTAIN............................................................................................................................................................... 20
5.2.5.6 PTZ ......................................................................................................................................................................... 20
5.2.6 Network Setup – Intranet (Internal Access)..............................................................................................21

User’s Manual
1
5.2.7 Network Setup – Global Access (Connected Directly to Modem)..........................................................22
5.2.8 Network Setup – Global Access (Connected through a Router or Firewall).........................................24
5.2.9 Port Forwarding...........................................................................................................................................25
5.2.10 Viewing your DVR over the Internet (UPNP)...........................................................................................26
5.2.11 Accessing the DVR through Internet Explorer Browser (IE): ...............................................................27
5.2.12 Mobile Phone and Tablet PC Access ......................................................................................................29
5.3 KEYLOCK................................................................................................................................................................38
5.4 CHANNEL SWITCH...................................................................................................................................................38
5.5 VIDEO SEARCH .......................................................................................................................................................38
5.6 PTZ CONTROL........................................................................................................................................................39
5.6.1 Cruise Setup ................................................................................................................................................39
5.7 MUTE .....................................................................................................................................................................39
5.8 MANUAL REC..........................................................................................................................................................39
5.9 STOP REC ..............................................................................................................................................................40
5.10 ROTATION.............................................................................................................................................................40
5.11 START CRUISE......................................................................................................................................................40
5.12 STOP CRUISE........................................................................................................................................................40
5.13 STANDBY..............................................................................................................................................................40
CHAPTER 6: ACCESSING WITH INTERNET EXPLORER..........................................................................................41
6.1 LOG-IN ...................................................................................................................................................................41
6.2 MAIN INTERFACE OF NET-VIEWER ............................................................................................................................42
6.2.1 Menu column ...............................................................................................................................................42
6.2.1.1 Live......................................................................................................................................................................... 42
6.2.1.2 Playback................................................................................................................................................................. 42
6.2.1.3. Setup..................................................................................................................................................................... 43
6.2.2 Play Control .................................................................................................................................................45
6.2.3 Remote Backup ...........................................................................................................................................46

User’s Manual
2
FCC RADIATION NORM:
FCC
This equipment has been tested and found to comply with limits for Class B digital device pursuant
to Part 15 of Federal Communications Commission (FCC) rules.
FCC Compliance Statement
These limits are designed to provide reasonable protection against frequency interference in
residential installation. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed or used in accordance with the instructions, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in television
reception, which can be determined by turning the equipment off and on. The user is encouraged to
try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected to.
CAUTION!
The Federal Communications Commission warns the user that changes or modifications to the unit
not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

User’s Manual
3
PACKAGE CONTENTS:
Your new Security Camera and DVR Kit will ship with the following items.
- 4-Channel H.264 DVR with 500GB Pre-Installed Hard Drive
- 4 Day & Night Cameras
- 4 Metal Stands for Cameras
- 4 Mounting Hardware for Cameras
- 4 60ft/18.3m BNC Camera Cables
- Remote Control (with batteries)
- USB Mouse
- 6 ft./1.8m Ethernet Cable
- 6 ft/1.8m BNC to RCA Cable
- DC12V DVR Power Adapter
- DC12V Camera Power Adapter
- User Manual
- Software CD
SYSTEM REQUIREMENTS:
Please be sure the computer that you install the included software with complies with the following
specifications:
- IBM PCs or 100% Compatibles
- Windows®XP, Vista, 7
- Internet Explorer 7 or Newer Web Browser Software
- CD-ROM Drive (for software installation)

User’s Manual
4
SAFETY INSTRUCTION:
1. Use proper power source.
Do not use this product with a power source that applies more than specified voltage
(100-240V AC).
2. Never insert any metal into the DVR or any openings.
Putting metal into the DVR case can cause danger of electric shock.
3. Do not operate in wet or dusty area.
Avoid places like a damp basement or dusty hallway.
4. Do not expose this product to rain or use near water.
If this product accidentally gets wet, unplug it and contact technical support immediately.
5. Keep product surfaces clean and dry.
To clean the outside case of the DVR, use a lightly dampened cloth (no solvents). Do not
use any cleaning solutions or cleaner.
6. Provide proper ventilation.
Use in well ventilated area to avoid overheating of the device.
7. Do not attempt to remove the top cover.
If any abnormal operation is observed, unplug it immediately and contact technical support.
Warning: You may be subjected to severe electrical shock if you remove the cover of the
DVR.
8. Handle DVR box carefully.
If you accidentally drop your DVR on any hard surface, it may cause a malfunction. If the
DVR doesn’t work properly due to physical damage, contact an authorized dealer for repair
or exchange.
9. Recommended to use with UPS (Uninterruptable Power Supply)
Connecting your DVR and cameras to a UPS allows continue operation even during power
outages. The duration of power out usage time depends on types of UPS used.
10.Make sure there is good air circulation around the unit.
This DVR system uses a hard drive for video storage, which generates heat during
operation. Do not block air holes/vents (bottom, upper, sides and back) of the DVR that
reduce the generated heat while the system is running. Install or place this product in a well
ventilated area.

User’s Manual
5
CHAPTER 1: DVR FEATURES
Other Features：
•H.264 compression
•Real time recording on 4 channels
•USB Backup to flash drive
•Triplex operation: view, record, playback simultaneously
•Security Certified Hard Drive pre-installed
•Easy control with USB mouse
•Instant viewing using Windows®Mobile™, Symbian®S60 Version 3 & 5, iPhone®,
Blackberry® OS 5, and Android®
•Internet Remote Functions*: View, Search & Playback, Backup and Setup
•Email alerts with JPEG attachment
•Microsoft Windows®XP, Vista, and 7 compatible

User’s Manual
6
CHAPTER 2: LAYOUT
2.1 Front Panel (Please refer to actual product for detail)
Item Buttons / Indicators Marks Functions
1 Standby Select which single channel to display
2 Hard Disk LED HDD Lights up or blink if HDD error occurs
3 Recording LED REC Lights up or blink when recording
4 Alarm LED ALM Lights up or blink when an alarm is triggered
5 HDD FULL LED FULL Lights up when Hard Disk Drive is full
6 Network Access LED 100M Lights up when DVR is being accessed via Ethernet
7 LINK LED LINK Lights up with Ethernet cable is connected and
working properly
8 Power LED POWER Lights up when powered on
9 Menu/Exit MENU/
EXIT
Press to open main menu or to go back to previous
menu screen
1-4 Select to display channel 1 thru 4.
10 Channel Select 5 Press to show quad screen
Move up
Move Left
OK/PTZ Press to enter selected option or open PTZ menu in
main display screen
Move Right
11 Navigation Buttons
Move Down
12 USB Data Port Connect USB device (Flash Drive, Hard Drive)
13 USB Mouse Port Connect USB Mouse
14 IR Receiver Remote control signal receiver
15 Rewind Rewind backward when playing a video clip
16 Stop/Step Press once to stop playing, press once more to go to
next frame
17 Play Press to continue to play a video clip
18 Slow Motion Press to select reduced speed playing.
19 Fast Forward Press to fast forward video clip
1
2 3 4 5 6 7 8 9
10 11 12
13
14
15 16 17 18 19

User’s Manual
7
2.2 Rear Panel (Please see actual product for detail)
Item Physical
ports
Connection method
1 Power Switch Switch the DVR ON or OFF
2 Power Port Connect to DC 12V power supply
3 Ethernet Port Connect intranet, internet (RJ45 interface)
4 VGA Connect to monitors with VGA input port
5 Audio input 4 Channel (RCA interface for Channel 1~4)
6 Audio Outputs Audio Signal Outputs to amplifier or audio equipments
(RCA interface)
7 Video outputs Connect to monitor inputs ( BNC interface)
8 Video inputs Connect CH1-4 ( BNC interface)
9 PTZ Pan Tilt Zoom Output to PTZ enabled camera
1
2
4
5 6
3
7
8
9

User’s Manual
8
2.3 Remote Control
The remote control is the secondary input device for navigating the system’s interface.
To use the remote control:
STANDBY Press to put DVR in Standby mode (all
recording will stop).
LOGIN /
LOCK
Press to login DVR if password is set or
activate lock
1-4 Channel Select 1-4
5-9,0 Digit Key 5-9 and 0
ALL Display all Channels – Quad View
Menu Open main menu
PTZ Open PTZ Control menu
EXIT Press to go back to previous or exit menu
UP
Down
OK Select
Left
Right
+ Press to increase volume or option in menus
- Press to increase volume or option in menus
●Record
■Stop
EXTRA (No Function)
Rewind
Play
Forward
Press to select reduced speed playing.
Press once to stop playing, press once more
to go to next frame
Audio Press to enable audio
Mute Enable or disable sound

User’s Manual
9
2.4 Mouse Operation
You can use a mouse instead of the front panel buttons or remote control to navigate the
operation of your DVR
The mouse is the primary input device for navigating system menus.
To use a mouse with the system:
1. Connect a USB mouse to the USB MOUSE port on the front panel of the system.
NOTE: Only the top USB port on the front panel is designed for data backup to a USB
flash drive. Do not connect a USB flash drive to the USB MOUSE port at the bottom.
2. Use the mouse buttons to perform the following:
a. Left-Button: Click to select a menu option; during live viewing in split-screen,
double-click on a channel to view the selected channel in full-screen; double-click
the channel again to return to split-screen view
b. Right-Button: Click to open the Sub-Menu, or click to return to previous option
menu.
3. Scroll-Wheel: Scroll after switched video output for mouse cursor to re-appear between
BNC and VGA output.

User’s Manual
10
Chapter 3: DVR/Camera installation
3.1 Connecting the DVR to a TV or Monitor
Using the supplied BNC to RCA connector
1. Connect the BNC to RCA connector to the back of the DVR labeled Video Output (refer to
Chapter 2.2, Rear Panel Picture)
2. Connect the other end of the cable to an open RCA VIDEO input on your TV or Monitor
3. Select the appropriate video input on your TV or Monitor to view the DVR
NOTE: Your DVR must be powered on so you can view on your TV or Monitor.
3.2 Connecting the Power Supply
1. Plug the provided power supply into the back of the DVR labeled “DC12V”
2. Plug the other end of the power Adapter into any 110V outlet within your home or business.
NOTE: Connecting your DVR and Cameras power source into a UPS or battery backup system will
provide you recorded coverage after power failures. Time depends on type of UPS used.
NOTE: Ensure the cable is pushed all the way into the power supply. Otherwise the DVR will not
power on!!
3.3 Connecting the Cameras
NOTE: Prior to mounting the cameras to their desired destination, please ensure all cameras are
working. Perform these steps near the DVR. Once all cameras are up and running, then you can lay
the cables and mount the cameras to their desired location.
1. Each camera comes with 60ft. of cable per camera. Using one cable per camera, plug each
BNC connector of the camera into the 60ft cable.
2. Plug the other end of the cables into the back of the DVR labeled “Video Input”
3. Connect the provided 4-way power splitters to the DC jacks of the cameras, and plug the
power splitter to the camera adapter.
4. Plug the camera adapter into any 110V outlet or UPS.

User’s Manual
11
CHAPTER 4: DVR START UP
4.1 System Initialization
After connecting the power adapter and turning on the power, the system will boot-up and start
initializing.
4.2 Main Interface
After initialization, the main interface will load. When there are
video inputs, the interface will display live images from the
cameras. In the main interface, if you use the mouse to
double-click the live image of any channel, the image will be
maximized to full screen, by double-clicking again, the display
will return to multiple channel mode displaying image from
multiple cameras; clicking the right button of the mouse, will
load the Pop-up Menu; by clicking the left button of the mouse
to select options; when clicking any area outside the menu, you
will close the Pop-up menu.
USING THE ONSCREEN DISPLAY
Use the system’s graphical onscreen display to navigate menus and configure options and
settings.
1. Date & Time: Displays the date and time on the system.
2. Channel Title: Displays the customizable name for the channel.
3. Record Status: Displays the current recording status of the system: R=normal recording;
M=motion recording; H= HDD problem
4. Channel number: Displays channel number.
NOTE: By default, passwords are disabled on the system. You do not need to enter a
password when accessing any system menus. However, for security purposes, it is highly
recommended to enable passwords on the system using the Password Menu.
For details, see “Managing Passwords”

User’s Manual
12
CHAPTER 5: DVR MENU AND OPTIONS
Mouse Only
When using the mouse, use the Sub-Menu to access several system options, including the
Main Menu.
To open the Sub-Menu, Right-click anywhere onscreen to open Sub-Menu.
MAIN MENU: Opens the main system menu
KEYLOCK: Password protect access to menu and options
CHN SWITCH: Select to display Channel 1 thru 4
VIDEO SEARCH: Click to open search for playing recorded
video clips
PTZ: Opens the PTZ control menu
Mute: Select to mute audio
MANUAL REC: Select to start manual recording
STOP REC: Select to stop manual recording
ROTATION: Start sequential display
START CRUISE: Start PTZ cruise track
START CRUISE: Stop PTZ cruise track
STANDBY: Select to go into standby mode
To close the Sub-Menu, click anywhere onscreen.
Using the Virtual Keyboard – Mouse Only
When using the mouse, you can input certain values using the onscreen virtual keyboard.
You will need to use the Virtual Keyboard when entering your User ID and Password.
To use the Virtual Keyboard:
1. Click on an option or field, such as the User ID and
Password fields.
2. Click 0~9 to enter the desired digit.
3. Click to switch between numerals, upper and
lowercase letters, and other characters (only for
certain options)
4. Click to Backspace/Delete.
NOTE: The buttons will turn from orange to white
when you select the button with the mouse cursor.
5. Click to enter/confirm and close the Virtual
Keyboard.

User’s Manual
13
5.1 Main Menu Preview
Network
Display
Alarm
PTZ
Mobile
MD (Motion Detect)
Password
Language
Date/Time
Playback
Record
Advanced
Basic
HDD
MAIN MENU
Video/Audio
Info
Maintain

User’s Manual
14
5.2 Main Menu
Right-click the mouse, a pop-up menu will be displayed on
the screen. Click “MAIN MENU” button on the pop-up
menu to enter into Main Menu. You can also use the Menu
button on the front panel to open the Main Menu. When
using the front panel buttons, use the navigation buttons to
move in the menu, and use the SEL button to select the
icon. Use the ESC button to return to previous window. In
Main Menu, you can change settings such as Playback,
Record, HDD, Basic, or Advanced settings such as alarm,
Motion Detect, Mobile, PTZ, and Network etc.
5.2.1 Playback Functions
To play a recorded video, select “Main Menu” 
“Playback” Functions to open the RECORD SEARCH
menu.
To search for a file, enter specific date and click
“SEARCH”, you will find all the recordings of that day. You
can play video Forward at 2x, 4x, 8x and 16x speeds, Slow
play at 1/2x, 1/4x, 1/8x, 1/16x or normal play, pause and
play frame by frame using the playback control bar, and
adjust volume by clicking or sliding tune control bar. When
playback is finished, system will return to previous menu.
You can select a file and push the Select button to playback the file, or use the navigation
buttons to select options or backup the recorded file you selected. You can also put a check
mark in the box at the end of multiple files if you want to backup more then one file at a time.
To search by file, click the “FILE LIST” button. This option will allow you to view all of the
available files by channel and type (all, normal, or alarm).
FIRST：Indicates the first page of recording history you
have searched. When you view other pages, clicking
[First] button brings you back to Page one.
PRE (Previous page): When viewing event list, clicking
“Previous page” button will take you back to page before
the one you are currently viewing (except the first page).
NEXT (Next page): When viewing event list, clicking “Next
page” button will take you to the page after the one you are
currently viewing (except the last page).
LAST (Last page): Indicates the last page of recording history you have searched. When
you view other pages, clicking the “Last page” button will take you to the Last page of the
searched files.
ALL (Select All): Allows you to select all of the events on the current page.
OTHER: Inverse selects all the unselected file and deselect all selected file.
Backup: If you want to backup one recording from the file list, use the Detail Files List to find
recorded video on your system and copy it to a USB flash drive (not included).
NOTE: The system is compatible with most major brands of USB flash drives, with
capacities from 256 MB to 4 GB.

User’s Manual
15
To backup recorded data:
1. Connect an empty USB flash drive to the bottom USB port on the back panel of the
system.
2. Open the Search menu and search for recorded data on the system.
3. Click FILE LIST.
4. Select the files you want to backup and click the "Select" box next to the file name, select
multiple files if desired. Click ALL to select all files; click ALL again to deselect all files.
NOTE: The size of each file is shown in the File List menu. Use this to help you find a USB
flash drive large enough to hold all the files you wish to backup.
5. Click BACKUP from the side-panel to immediately begin copying the files to the USB flash
drive.
NOTE: Backup progress appears in the status window. DO NOT remove the USB flash drive
during backup.
6. The system will create a folder on the USB flash drive named RecordFile. The files are saved as
.264 files. If backup is successful, click CLOSE in the confirmation window and then
remove the USB flash drive.
NOTE: If there is not enough space on the USB flash drive, the system will display the
following: "Space is not enough."
NOTE: Backup file will be in H.264 format, you can convert it to AVI format using the
Multimedia Player program that comes with the DVR or through the net-viewer program, so
you can use any player that supports AVI format
5.2.2 Record
Select Main Menu Record to open the RECORD
SETUP menu. The adjustable options are as follow:
Record: Allows you to turn each channel ON/OFF.
Resolution: Choose between “D1”, “HD1”, and “CIF”.
Quality: Choose quality level between “H” (high), “M”
(middle), and “L” (low).
Audio: Allows you to Enable/Disable the audio port if you
have audio enabled camera installed.
Record Mode: Choose between Time Schedule Record or Continuous. Time Schedule
will allow you to set motion detection or record at a specific time of day/night.
REC Size: Set the file size limit of each recorded clip.
Mask Field: Click to select the area that you would like to be hidden when recording.
Schedule: Choose the recording hours and recording type by clicking this option.

User’s Manual
16
Note: Select Record and the select Schedule to access the below menu.
SCHEDULE recording options include ALL, CH-1, CH-2,
CH-3…respectively. Please select the option you need to
record according to the schedule, the channel you have
set will be highlighted in “Blue” and channels you have not
set will be “Grey”.
To setup weekly schedules, click on the box of the corresponding time. Choose between
Motion, Continuous, or No Recording and then click on each box in the schedule time line
that you want to apply the select record type to. You can also use the “From – To” pull-down
menus and Copy button to copy settings from one day to another. After you have
completed the schedule, click “Apply” button to save the settings.
You can also click on the Default button to use the system defaults. The system default
settings are:
Alarm all time on = Motion Detection = ON
5.2.3 Hard Disk Management
To manage the installed Hard Disk, click “Main Menu”
“HDD” to enter “HDD MANAGEMENT”. The HDD
Management screen shows the capacity and available
recording time of the installed hard drive and let you
configure whether to overwrite old recordings or stop when
HDD is full.
Select “HDD Format” to format the installed Hard Disk
Drive and erase all recorded files.
Select “U Disk Format” to format the installed USB Disk
Drive by erasing all recorded files on the drive.
To enable your DVR to overwrite old recording files,
choose “ENABLE” at the OVERWRITE field and then click
Apply.

User’s Manual
17
5.2.4 Basic Setups
5.2.4.1 Language
Click “Main Menu” “Basic” “Language” to setup the
default system language.
5.2.4.2 Date/Time
Click “Main Menu” “BASIC” “DATE/TIME” to enter the TIME SETTING window to
modify system date, time, date/time format and time zone, DST (day saving time).
•DATE: Enter the day, month, and year
•DATE FORMAT: Select YYYY/MM/DD, or
MM/DD/YYYY
•TIME: Enter the time
•TIME FORMAT: Use the drop-down menu and select
12HOURS or 24HOURS
•TIME ZONE: Use the drop-down menu to select the
time zone you are in.
•DST: Use the drop-down menu to select ON/OFF to
enable/disable Daylight Savings Time.
5.2.4.3 Password
Click “Main Menu” “Basic” “Password”. This option
allows you to set the user permissions and password of up
to 6 users. Click “Config” to individually configure the
users, their account type and password.
The password supports up to 6 characters. Click
“APPLY” to save the settings.
NOTE: Please write down your passwords and store in a
safe location.

User’s Manual
18
5.2.4.4 Display
To set up your cameras, select “Main Menu” Basic
Display to open the DISPLAY SETUP menu.
CH Name: set up the name display of each channel.
Position: display position of each channel.
Color: Click to open sub-menu to adjust image brightness,
saturation, contrast and hue settings of each channel.
LIVE: enable to display the channel.
PREVIEW Time: enable to show the time.
Record Time: enable to show the time of the record.
COLOR SETUP Menu allows you to adjust image
Chromaticity (hue), Luminosity (saturation), contrast and
saturation of each channel.
Click “APPLY” to and then click “OK” to save the adjusted
settings. Click “EXIT” to cancel the modification, or click
“DEFAULT” to restore all settings to the factory default
settings.
5.2.4.5 Video/Audio
Click “Main Menu” “Basic” “Video/Audio” to setup
Video and Audio output options such as resolution and
format. You can also preset a channel display sequence
timing or adjust the volume. Margin is the position of the
display for better fitting of your screen.
5.2.5 Advanced Setups
5.2.5.1 Alarm
To configure the Alarm mode of each channel, click
“Main Menu” “Advanced” “Alarm” to enter into
“ALARM SETUP” menu.
HDD Loss: Set action when HDD is operating irregularly.
HDD Space: Set this to trigger the alarm(s) when the
“HDD Overwrite” option is disabled and the HDD is full.
Video Loss: Set this to trigger the alarm when any of the
camera signal is distorted or loss.
PreRecord: Your DVR temporarily store the 5 seconds of
video before any alarm is triggered. Set this to “ON” if you
would like the pre-recorded 5 seconds to be saved to your
HDD also.
Buzzer: Set the time the alarm signal will continue once it
is triggered.
Post Recording: Configure these options for how long the
DVR will record after alarm is triggered.
Click the “EMAIL SETUP” button to configure the outgoing
mail server information.