
3
QUICK REFERENCE GUIDE - OPTO-COUPLING IR CABLE (MONO-STEREO)
TROUBLESHOOTING
Should you encounter installation difficulties or issues with device communication, the following checklist of
common issues and causes should help resolve your issues. If you still continue to experience issues, please
contact your local representative for further assistance.
Not Receiving Signal
1. Reseat the cable from both ends.
2. If there is another opto-coupling cable, try swapping them to see if where the problem lies.
3. Please contact a Pulse-Eight representative or your Installer if the cable is faulty.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its parts translated into
any language or computer le, in any form or by any means (electronic, mechanical, magnetic, optical, chemical, manual, or otherwise)
without express wrote permission and consent from Pulse-Eight Limited.
© Copyright 2022 Pulse-Eight Limited. All Rights Reserved.