PULSE+ PHV15 User manual
PAGING HORN SPEAKER, ABS, 100V
Model: PHV15 and PHV30
IMPORTANT SAFETY INFORMATION
PRODUCT OVERVIEW
FEATURES
Please read these instructions carefully before use and retain for future reference.
• When using any electrical appliances basic safety precautions should always be
followed.
Safety Information for Installation and Operation
• Check the product before use for any damage. Should you notice any damage on
the cable or casing, do not use.
• When installing, make sure that the product is not exposed to extreme heat,
moisture or dust.
• 'RQRWH[SRVHWRÀDPPDEOHVRXUFHVRUJDVHV
• A secondary means of suspension should be provided, such that in the event of a
failure of the primary suspension, no part of the speaker can fall.
• The operator must be sure that safety related matters are observed and that the
LQVWDOODWLRQLVDSSURYHGE\DTXDOL¿HGLQVWDOOHUEHIRUHXVH
• Avoid the loudspeaker cable coming into contact with other cables.
• Handle the loudspeaker cable and all mains voltage connections with particular
caution!
• Beware of high voltages in the speaker cable. Always power down the source
equipment and disconnect from the mains supply before cleaning or connecting or
disconnecting any cables.
• Do not open the equipment and do not attempt to modify the equipment, there are
no user serviceable parts inside.
• Do not power the equipment on and off in short intervals, as this will reduce the
devices life span.
• Make sure that the loudspeaker cable is not crushed or damaged. Check the
equipment and the loudspeaker cable periodically.
• If the equipment is dropped or damaged, disconnect the supply immediately and
KDYHDTXDOL¿HGHQJLQHHULQVSHFWWKHHTXLSPHQWEHIRUHRSHUDWLQJDJDLQ
• Only use fuses of same type and rating.
• 7KLV9KRUQORXGVSHDNHULVGHVLJQHGVSHFL¿FDOO\IRUXVHLQSHUPDQHQWDXGLR
installations, where sound quality and reliability are required. Highly rugged
FRQVWUXFWLRQDQGDKLJKO\HI¿FLHQWGHVLJQPDNHWKLVKRUQVSHDNHUSHUIHFWIRU
continuous use applications.
• Weather resistant horn loudspeakers suitable for indoor or outdoor applications.
• Ideal for general purpose and standard industrial installations.
• 30W/15W power taps at 100V line - PHV30.
• 15W/7.5W power taps at 100V line - PHV15.
• Supplied with adjustable angle mounting bracket.
• Tough ABS enclosure.
• Avoid excessive force when installing.
• Always install on a surface that can support the weight of the speaker.
• 8VLQJWKHPRXQWLQJEUDFNHWDVDWHPSODWHPDUNKHZDOOWKHQGULOOWKUHHKROHVDQG¿W
wall plugs if required.
• Attach the mounting bracket onto the wall with the screws.
• Connect the 100V/70V supply wiring as follows:-
Green wire: Full power tapping
White wire: Half power tapping
Black wire: Common ground terminal.
• Attach the loudspeaker to the mounting bracket using the screws on either side.
• Adjust the directional angle of the speaker before fully tightening the screws.
INSTALLATION
PHV15
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area. Made in China.
PO Box 13362 Dublin 2
PR2 9PP
Man Rev 1.0
SPECIFICATIONS
MHV50 PHV15 PHV30
Power Taps@100V Green:15W, White:7.5W Green:30W, White:15W
Power Taps@70V Green:7.5W, White:3.75W Green:15W, White:7.5W
Impedance Black: COM1.3k¡670¡Black: COM330¡670¡
SPL(1W/1M) 103dBf3dB 103dBf3dB
Freq Response 250-8KHz 300-13KHz
IP Ratng IP65 IP65
Dimensions 221x235x165mm 282x210x290mm
Weight 1.6Kg 2.1Kg
PHV30
This manual suits for next models
1
