Pumpables SuperGenie User manual

SuperGenie
Quick Start Guide

Welcome to Pumpables

Getting help
Working out using a breast pump and breastfeeding while you
care for a newborn is hard work and you don’t need to do it alone.
You are very welcome as part of the Pumpables community. If you
need help, please get in touch.
Email
[email protected]
Need help or have a
question? Send us an email
and we will get right back.
Issues with your pump
If you suspect a fault or something isn’t right, email our
customer service at [email protected] or fill out the
claim form at pumpables.co/warranty. We prioritise
warranty support and we will get back to you straightaway.
Facebook chat
fb.com/pumpables
Find us on Facebook and
send us a message. Easiest
method for busy mamas!
Community
pumpables.co/community
Get support, tips and feed-
back from other mamas in
Pumpables Community on
Facebook.
Fitting room
pumpables.co/fittingroom
Get a second opinion on
your shield fit & positioning
from the Pumpables team.

Pump unit
Charger +
4 international plugs
This is a quick start guide to get you
started. Go to pumpables.co/manuals
for the full manual.
The full manual also tells you all the
tips and tricks for your Liquid Kit.
We’ll guide you through getting to know your SuperGenie later in
this manual, but for now, here’s a list of everything that’s included
with your pump.
What’s in the box
3

Get to know your
SuperGenie
Meet your new SuperGenie breast pump, the most advanced
desktop breast pump available today. The SuperGenie provides
hospital grade performance with integrated smart features.
Night Light Button
1 press: level 1
2 presses: level 2
3 presses: turn off
L03 20:30 80
CYC LEVACU UM
Handle
Rotate 90 degrees
Power Button
Long press (2secs): On/Off
Short press: Pause/Resume
Program Button
Start customized program
Single / Double Pumping
Cover either air inlet to
enable single pumping
Vacuum / Cycle Button
Adjust settings with vacuum
and cycle button
Mode Button
Switch between letdown
and expression mode
Letdown mode
Expression mode
Record / OK Button
Record pumping session /
Select customized program
USB-C Port
Bluetooth
Bluetooth pairing
SuperGenie connected
4

Getting started
Charging your pump
You can start using your pump right
away out of the box. Once it’s time to
recharge, charging time is 4 hours.
You can use the pump while charging.
When assembling the adaptor, make
sure it clicks into place.
CLICK
Plug into pump.
Lighting icon will blink during charging.
L05 01:16 38
CYCLEVACUUM
Lighting icon will stop blinking when
fully charged.
L05 01:16 38
CYCLEVACUUM
5

Getting started
Connecting the app
Download the SuperGenie app to control your SuperGenie, track
sessions and save programs.
The SuperGenie pump app can be downloaded through the App
Store or Google Play. Once you have downloaded the app, please
follow the instructions to connect your SuperGenie and get set up.
You’ll need to enable location access so that the app can use a
lower energy bluetooth setting.
If you need help, just let us know.
6

Understanding the
controls
Start SuperGenie
Press power button for 2 seconds to turn on SuperGenie
Bluetooth pairing
SuperGenie is connected
L00
00:00
00
CYCLE
VACUUM
2 seconds
Switch between modes
Change between letdown and expression mode by pressing mode
button
Letdown mode
Vacuum strength: 1-5 Cycle speed: 72-104
Expression mode
Vacuum strength: 1-16 Cycle speed: 40-70
L00
00:00
00
CYCLE
VACUUM
L00
00:00
00
CYCLE
VACUUM