Puppy Electronic S9 Turbo User manual
Instruction Manual
Gebrauchsanleitung
S9 Turbo
1. Warnings
2. Safety Direction
3. Transporting your Vacuum
4. Product Parameter
5. Components
6. Assembly Method
7. Use Instructions
8. Cleaning method
9. Daily maintenance
10.Troubleshooting
Contents
01
01
03
03
04
06
08
11
13
14
01
Before using this appliance, read and follow all warnings and instructions in this manual, even
if you are familiar with this product.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a personresponsible for
their safety.
Young children should be supervised to ensure that they do not play with the appliance.
1. Warnings
2. Safety Direction
1. About This Manual
Please read this manual carefully before use, assemble the machine according to this
Manual.
Please keep this manual well, if you transfer the product to a third party, please attach this
manual together with the machine.Any operation that does not comply with this manual may
result in serious personal injury or damage to the product. It is not our company related if you
failure to follow the instructions in this manual.
2. If you find that the power cord or plug is damaged, the power outlet is loose, the power
plug does not match the socket, do not use this machine, otherwise it may cause electric
shock or overheating to cause a fire.
Do not pull the power cord or the power plug, do not over-twist the power cord, Do not pinch
the power cord or close the power cord when the door is closed;
When the power cord or plug is damaged, do not use the machine,please contact with our
company's after-sales service department for help;
Do not touch the power plug with wet hands, which may cause electric shock;
If you do not use this machine for a long time, turn off the power, unplug the power plug;
Clean the power plug regularly, remove the dust on the plug, pay attention that this operation
must first pull out plug firstly, and then wipe with a dry cloth.
3. This appliance should not be operated by children or the people who is physical and
mental disabled or lack of relevant experience and knowledge, unless under the guidance
and supervision of the people who could be responsible for the user's safety. Keep the
product and lay it on the place where can not be touched by children and the person who can
not judge the dangers.The packaging bags and plastic bags of this machine should be
avoided by children, or it may cause suffocation.
02
4. This product is suitable for indoor environment with the ordinary ground, carpet, curtains
and other areas cleaning, it is forbidden to apply this product to any other surface cleaning
that is not within the design.The following things are absolutely prohibited:
01. Hair, fingers and other parts of the body, should not touch the internal parts which might
cause electric shock or damage;
02. Clothes, other parts of the clothes (such as ties, scarves, etc.) may be pulled into the
machine to cause danger;
03. Extinguish soot, burning cigarette butts or matches may cause a fire;
04. Sharp objects, such as glass fragments, pins, paper clips, etc., these objects may
damage the filter;
05. Never use in the presence of explosive liquids or vapors;
06. Never vacuum inflammable or poisonous liquids such as petrol, copier toner or other
volatile substances.
07. A large quantity of gypsum, cement, large paper, etc. these objects may block the filter
which needs promptly clean;
08. Do not use this machine near to or on the surface of flammable, explosive objects, or it
will result in the risk of fire and explosion;
09. Do not use this product outdoors, or it may cause damage to the machine if rain or soil
dust get into the unit;
10. Do not hang or rotate any objects outside the air outlet, clean the hair, dust and other
small objects in front of the air outlet, or it may cause the air outlet blockage, reduce the air
flow then bring machine overheating;
11. Do not close to the oven, fireplace and other heat sources while using and storing the
machine, which will make the machine shell deformation damage;
12. Please pay special attention while cleaning the stairs to prevent falling;
13. Do not wet the body, or it may cause fire and electric shock due to short-circuit of the
machine.
14. The machine can not be used to clean the toner, battery powder, can not be used in
dangerous places or industrial production sites; can not be used in non-floor, ordinary ground,
carpet special vacuum, otherwise it will cause damage to the product, or even explosion!
15. Do not insert the power plug into the power outlet, otherwise the product may be
mistakenly connected to the power supply during the assmeble process, then causing
damage.
16. Please be sure to carefully check the product and power cord before use; Do not use the
machine if the machine or the power cord is damaged, or it may cause danger; Do not use
any vacuum cleaner to adsorb any stains with water to avoid unnecessary personal injury
and property damage.
03
17. Before using the product, please ensure that all the filter material has been assembled in
place, the filter material can not be damaged, after cleaning the filter material must be
completely dry before use, otherwise it will cause damage to the machine.
To move your vacuum cleaner from room to room, unplug the unit and carry using the carry
handle.
Never pull or carry the vacuum cleaner by its cord. Never carry the vacuum cleaner by the
flexible hose.
3. Transporting your Vacuum
Rated Voltage: 220V~50Hz Rated Power: 850W
Power Cord Length: 5m Dust Cup Capacity: 2.5L
EVA Pipe Length: 1.5m Dimension: 440*277*328mm
4. Product Parameter
Air Intake Port Diameter: 32mm Net Weight: 6.8kg
04
Main body handle
Floor brush hanging slot
Dust full indicator light
Dust cup
Dust cup handle
Power cord button
Power on/off
Speed control button
Dust cup release button
Omnidirectional wheel
Double row wheel
Main air intake tube
5.Components
05
EVA Flexible Tube with Handle
Metal Telescopic Pipe
Floor Brush
Flat Nozzle
2-in-1 Flat Brush
Square Soft Brush
Accessory Rack
Pet brush
06
Please Note: Always remove the plug from the power socket before fitting or removing
accessories.Ensure all Filters are fitted, and fitted correctly before using.
6. Assembly Method
01. Insert the main air intake tube
clamp with EVA hose into the suction
socket, and hear the “click” lock
sound, indicating that the lock is
secure. When disassembling, press
and hold the buttons on both sides of
the main air intake tube of the hose
and gently pull it out.
02. Connect one end of the tube with
the handle to the metal telescopic
pipe. After inserting the telescopic
pipe, turn it to the left and right to
confirm that the connection is firm.
Pull out directly when disassembling.
03. The other end of the telescopic pipe
is connected to the floor brush (or other
brush). After inserting the floor brush,
rotate it to the left and right to confirm
that the connection is firm. Pull out
directly when disassembling.
07
04. Remove and install the dust cup
Press the dust cup release button,
the upper air duct bounces, then pick
up the dust cup handle and lift the
dust cup up.
05.Before installing the dust cup,
make sure that the filter device is
installed in place. After the dust cup is
hung, press down on the air duct.
After the “click” sound is locked, the
dust cup is installed in place.
2. Pick up
the dust cup
1. Press
the button
08
7. Use Instructions
01. Select and install the plug according to your needs.
02. Pull the power cord out and adjust it to the proper length.
03. Press the power on button to start the vacuum cleaner.
Press to start
vacuuming
7.1 After the product is assembled
Note
Make sure all filter materials
are in place before using the
product. The filter material
should not be damaged. The
cleaned filter material must
be thoroughly dried before
use, otherwise it will cause
damage to the product.
Attention
For surfaces such as curtains that do not require
too much suction, the suction can be adjusted via
the air intake compensation button on the hose
handle.
Warning
If you see the red mark at the end
of the power cord, press the
power cord button to retract the
power cord to the red mark
invisible position. Otherwise, the
power cord may fall off and
damage the product.
Warning
Please check the product and power cord carefully
before each use. If the power cord of the product is
damaged, it is forbidden to use, which may cause
danger. It is strictly forbidden to use a vacuum
cleaner to absorb any stains with water to avoid
motor burnout and short circuit, resulting in
unnecessary personal injury and property damage.
Attention
Please turn off the power
immediately after using the
product, otherwise it may
cause a fire.
10
Speed control button
Power on/off
Dust cup release button
04. During the cleaning
process, you can switch the
suction according to your
needs. Press the speed
control button on the left side,
the machine switches to the
strong working mode, press
the speed control button
again, the machine returns to
the silent working mode. Two
gears can be adjusted.
05. After cleaning is complete,
press the power on/off button
again to turn off the vacuum
cleaner. After turning off the
power of the vacuum cleaner,
unplug the power cord and
press the power cord button
to retract the power cord.
11
8. Cleaning method
8.1 Cleaning filter
This product is equipped with the
following filter
01. Cyclone filter----installed inside the
dust cup to separate and filter dust and
hair.
Cleaning cycle: Generally, it should be
cleaned at least once a month. Be sure to
use it after drying.
02. Air intake filter sponge----Installed on
the air intake filter to filter fine dust.
Cleaning cycle: Generally clean at least
once every two months. Be sure to use it
after drying.
03. Square filter sponge----installed at the
rear end of the upper air duct, the upper
part of the air intake of the motor.
Cleaning cycle: Generally clean at least
once every four months. Be sure to use it
after drying.
04. Outlet HEPA filtration----filtering at the
back of the machine to ensure clean air.
Cleaning cycle: Generally clean up once
every six months. Can be beaten or
washed. Be sure to use it after drying.
Pour dust
01. Turn off the power button
02. Remove the dust cup (Refer to page7)
03. Press the button of the dust cup
bottom cover button, pull the button, open
the dust cup bottom cover, and pour the
dust.
12
air intake filter HEPA
01. Turn off the power
02. Remove the dust cup,
take out the air filter
sponge, and gently beat it
on the trash can to
remove the adhered dust;
03. Refill the air filter
sponge into the dust cup.
04. After opening the
upper wind cover, the filter
HEPA is placed under the
filter sponge in the middle
of the main machine. The
cleaning method is the
same as the filter sponge.
8.2 Clean air intake filter sponge
8.3 Clean air filter HEPA
01. Turn off the power button and
retract the power cord.
02. Pull the fan button down and
take out the grille.
03. Pull out the air HEPA to the left
and take out HEPA.
04. Gently tap the HEPA filter on
the trash can to remove dust.
05. Put the HEPA filter back into the
machine and cover the grille back.
13
Note
If necessary, flush the HEPA under the faucet and do not use
a brush to avoid damaging the filter material. After thoroughly
drying, it can be reinstalled back to the machine.
Attention
After cleaning, the filter material must be thoroughly dried
before reuse. Otherwise, the inside of the machine may be
overheated and dangerous.
Attention
Make sure all filter materials are loaded into the machine
before starting the vacuum cleaner and they are all in place.
9.1 Cleaning the machine
01. All routine maintenance and maintenance work should be
performed after the vacuum plug is unplugged.
02. Always clean the garbage in the dust cup to avoid the
vacuum cleaner malfunction.
03. The surface of the vacuum cleaner should not be scrubbed
with gasoline or other oils. Please scrub with water or a neutral
detergent.
04. Do not leave the vacuum cleaner in a place exposed to
direct sunlight or moisture when it is not in use.
Attention
The rag should be wrung out during cleaning. Do not allow water
to seep into the vacuum cleaner.
9.2 Cleaning the floor brush
01. Turn off the power button (Refer to turn off the power, retract
the power cord);
02. Remove the floor brush;
03. Rin off the hair, animal hair, or debris that is entangled on
the brush head and remove dust;
04. Reinstall the floor brush back into the machine.
9. Daily maintenance
10. Troubleshooting
14
Fault phenomenon
Vacuum cleaner
does not work
Weakened
suction
Rotating
abnormal noise
1. The power plug is not plugged
in;
2. The power socket has no
power;
3. The power button of the
vacuum cleaner is not pressed;
4. If the use time is too long or
the use is continued after the
blockage, the temperature is too
high, and the temperature control
system automatically cuts off the
power.
1. EVA tube / Telescopic pipe or
brush head blocked;
2. The garbage in the dust cup is
too full;
3. The filter sponge is clogged.
There may be foreign objects in
the wind tunnel.
Stop using and clean up foreign
objects immediately.
1. Clear the blockage;
2. Clean up the garbage in time;
3. Clear the blockage.
1. Unplug the plug and reinsert it
into the power socket;
2. Check the home power
distribution unit and check the
circuit;
3. Check if the vacuum cleaner
power button is pressed;
4. Turn off the power button,
unplug the power cord, and wait
for the vacuum cleaner to cool for
30 minutes, then clean the
blockage and re-use it.
Possible reason Treatment
If an abnormality occurs during the use of this product, please refer to the
following table for reference.
Disposal
Protect our environment: do not dispose of electrical equipment in the dust
bin.
Please return any electrical equipment that you will no longer use to the
collection organizations .
This helps avoid the potential effects of incorrect disposal on the environment
and human health.
This will contribute to the recycling and other forms of reutilization of electrical
and electronic equipment.
Information concerning where the equipment can be disposal of can be
obtained from your local authority.
Address:
TEL.:
Email:
Zip Code:
7-605, 6th floor, No. 1 Building, No. 8 Courtyard, Guanghua Road, Chaoyang District, Beijing, China.
86-10-5741 7619
puppyoo@moomv.com
100101
Puppy Electronic Appliances Internet Technology Beijing Co., Ltd.
Made in China
Table of contents
Other Puppy Electronic Vacuum Cleaner manuals
