Pure Acoustics HDS-200 User manual

1
Soundbar+Subwoofer
Model #: HDS-200
Please read this user's guide before using your new soundbar.
User's Guide
Package Contents
■ Soundbar ×1 ■ AC Adapter ×1
■ Line-In Cable ×1■ Remote Control ×1
■User's Guide ×1■Wireless Subwoofer ×1
■ AUX-IN Cable x 1 ■ Subwoofer Connecting Cable x 1

2
Features
■ Provides powerful sound to enhance your listening experience
■ Easy to connect to yourdevices
■ Remote forconvenient controllingfrom adistance
Note:The powersource must supply 12 V DC.
Its center tip mustbe set to positive and its plugmust fit the DC IN jack. Using an
adapterthatdoes not meet these specifications could damage the soundbar or
adapter.
Important Safety Instructions
1. Read these instructions. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this soundbar near water.
5. Clean only with dry cloth.
6. Do notblockany ventilationopenings. Install inaccordance with the
manufacturer's instructions.
7. Do not install nearanyheat sources such as radiators, heat registers, stoves, or
otherapparatus (including amplifiers) thatproduce heat.
8. Use only attachments/accessories specified bythe manufacturer.
9. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit the soundbar.
10. Unplug this soundbarduring lightning storms or when unused for long periods of
time.

3
11. Referallservicing to qualified service personnel. Servicing is required when the
soundbar has beendamaged in any way, suchas ifthe power-supply cord orplug
is damaged, liquid has beenspilled or objects have fallen intothe soundbar, it has
been exposed to rain or moisture,itdoes not operate normally, or it has been
dropped.
Warnings and Precautions
■ To reduce the risk of electric shock, do not remove cover (or back). There are no
user- serviceable parts inside.
■Do not expose the soundbar to dripping or splashing liquids. Do not place objects
filled with liquids (such as vases) on the soundbar.
■ The mains plug is used as the disconnect device. It shall remain readily operable
and should not be obstructed during intended use.To completely disconnect the
soundbar from supply mains, the main plug of the product shall be disconnected
from the mains socketoutlet completely.
■Using the soundbar near fluorescent lighting may cause interference with the
remote. Let the soundbar be behaving erratically, move away from any fluorescent
lighting.

4
System connection instructions
Important tips for system connection
When you want to connect TV or other audio, it means to connect to the output
port of your equipment, but not to connect the input port please check the connection
carefully before you use our products
Please connect to the output port of TV headphone directly
If your TV has 3.5 mm output port headphone audio output port you can use
the attached 3.5 mm audio cable to connect your TV and our products.

5
Please connect to DVD player audio output port directly
If your DVD player has the red and white audio output port, please use the
attached red and white RCA cable to connect our product and the DVD player.
Connect to Bluetooth directly
Please transfer our product to the Bluetooth mode and turn on your
cellphone’s Bluetooth function, if you search Bluetooth GS-SB204CD, please
connect it.

6
Wired Subwoofer Connection Instructions:
Subwoofer Specifications
Dimension: W130 mm ×D 250 mm × H 350 mm
Power Input: DC 12V
Output (RMS): 10W
Speaker Units: 5.0 inch × 1
Frequency Response: 60-20k (Hz)

7
Instructions of Remote

8
Troubleshooting
Specifications
Power Input: DC 12V
Output (RMS): 10W×2 (Soundbar) + 10W (Subwoofer)
Frequency Response: 80-16k (Hz)
Speaker Units for Soundbar：2.0”Mid-Tweeter x4
Speaker Units for Subwoofer: 5.0”Subwoofer x1
Audio Input: Line-In / Mic-SD/ Bluetooth / Aux-In /OPTICAL
Other Functions: FM Radio,Line-Out
Specifications are subject to change and improvement without notice. Actual product
may vary from the images found in this document.
Problem
Solution
No sound
Make sure the AC adapter is plugged into a working outlet and
firmly connected to the soundbar
Check the connection of your device to the soundbar
Distorted sound
Check your source device to see if it is causing the distortion. Set
the device and soundbar volume to a low level
Unbalanced sound
If the volume remains low even when the soundbar’s volume is
turned all the way up, check the source device to make sure it is
connected via variable output. Make sure the output is not turned
down too low.

9

10