Pure Acoustics PQ-2208 User manual

PQ-2208 & PQ-2210
Speaker Box with Amplifier
with MP3 player
User’s Manual
Before using your new Speaker Box with amplifier, please read this instruction
manual to prevent any damage. Put it away in a safe place for future references.

INSTRUCTIONS
Before connecting the speaker, make sure the system is off and
the controls on the minimum level. On the contrary the system
Could damage
1.- Plug the polarized cable to electric power and to the speaker
2.- Plug the Microphone on the “MIC”input with a 6.3 connector
3.- Plug an auxiliary system (CD, DECK, MP3, DVD, etc) on
“LINE IN”input
4.- Turn on the systems. A green LED light up on the speaker to
indicate it is on
5.- Set the volume on the middle level on the MIC and LINE IN input
6.- Increase little by little the line level volume
7.- Set TREBLE and BASS controls to equalize the sound.
8.- Ared LED light up when the system detects overload power.
You must decrease the volume.
Caution
Do not close the microphone to the speaker, it can cause
feedback echo and it damage the system
EXTRA FUNCTIONS
Cannon connectors mark as LINE OUT can handle an
amplifier or even another PQ, in cascade.
On the bottom of the speaker there is a hole to place a stand.
FEATURES
Polarized input to plug the power supply.
6.3mm input for the microphone
Two inputs: RCAand Cannon like auxiliary.
Cannon output.
LEDS to indicate power on (green) and overload power (red)
On and off switch
Microphone volume control
* Auxiliary volume control
* Line level volume control
* Tone control
* Protective fuse
* Supply power cable included
* To stand in horizontal or vertical position

CONTROLS
1. MP3 PLAY
2. USB/SD input
3. TONE
Allows you to increase or decrease the treble level.
4a). SATURATION INDICATOR
This LED indicator light will illuminate if there is an
overcharge. If this happens decrease the volume levels.
4b). POWER INDICATOR
This LED indicator light will illuminate when the speaker
ispowered on.
5. LINE LEVEL
Controls line input and line output levels.
6. LINE OUTPUT JACK
Allows you to connect a powered amplifier or another speaker.
7. MP3 LEVEL
SET THE VOLUME LEVEL.
8. MICROPHONE VOLUME LEVEL
Allows you to increase or decrease the volume level from 0 to 10.
9. 6.3mm MICROPHONE INPUT JACK
Allows you to connect a microphone with a 6.3mm plug.
10.LINE INPUT JACK
Allows you to connect an RCA audio device.
11.ON/OFF SWITCH
Powers the device on/off.
12.POWER CABLE INPUT
Allows you to connect the power cable.

CAUTIONS
* Do not wet it or expose to leaks or splashes
* Keep it on fresh places
* Do not operate it on places with humidity
* Do not hold drinks on it.