Pure Comfort 6008QLB User manual

CUSTOMER SERVICE: 866-498-5269
customerser[email protected]
Low Prole Queen Size Air Bed 78 x 58 x 9 inch* ination sizes are approximate*
Model No. 6008QLB
Ensure the following items are included in the
package:
● Queen Sized Mattress
● Battery Operated Pump (batteries not included)
● Carry and Storage Bag
● Repair Kit
TO INFLATE:
1. Check your surroundings for any sharp objects on the ground/oor that may cause damage to the
bed (nails, screws, sharp rocks, etc.).
2. Unfold the bed and lay it at on the oor.
3. Attach an adaptor nozzle to the Pump and ensure the it is in the “OFF” position.
4. Insert 4 NEW “D” batteries into the Pump. (see instructions on reverse side of this sheet)
5. Make sure the pump nozzle vents are clear of any obstructions.
6. Insert the adaptor nozzle tip into the valve on the bed and turn the pump on.
7. When air mattress reaches the desired rmness, switch the pump off.
DO NOT OVERINFLATE! INFLATE UNTIL THE WRINKLES IN PVC ARE ALMOST
GONE, AND THE MATTRESS IS FIRM. Never inate the bed beyond its stated size.
TO DEFLATE:
1. Open the valve(s) on the bed and allow the air to escape.
2. Once almost fully deated, attach the nozzle adaptor to the “DEFLATE” vent on top of the pump.
3. Turn the pump on to remove the remaining air.
4. Close the valves, and carefully fold the bed and place into the storage bag.
NOTE: If you are going to be storing your bed for an extended period of time, make sure to remove
the batteries from the pump before doing so.
IMPORTANT: ADDITIONAL INFORMATION REGARDING INFLATION PRACTICES, BATTERY
INSTALLATION, PUMP USE, PUMP SAFETY, AND USING THE REPAIR KIT ARE LOCATED ON THE
REVERSE SIDE OF THIS SHEET.
YOU MUST FULLY READ THIS INFORMATION BEFORE USING THE PUMP OR INFLATING THIS PRODUCT.
Please visit www.pureglobalbrands.com and register your product to ensure warranty
coverage and for any important safety or product updates. Use search word: 6008QLB.
● DO NOT OVER OR UNDER INFLATE.
● CAUTION: AFTER INFLATION, A SIGNIFICANT CHANGE TO HOT
WEATHER WILL CAUSE AIR TO EXPAND. YOU MUST RELEASE AIR
TO PREVENT THE AIR BED FROM FAILING DUE TO OVER-
PRESSURE. A CHANGE TO COLD WEATHER WILL CAUSE AIR TO
CONTRACT. YOU MAY NEED TO ADD AIR TO MAINTAIN FIRMNESS.
AVOID USING THIS AIR BED IN EXTREME TEMPERATURES.
● KEEP AWAY FROM SHARP EDGES, NAILS, OR ANY SHARP OR
POINTED OBJECTS.
● KEEP AWAY FROM OPEN FLAME AND HEATERS.
● DO NOT STAND, WALK, OR JUMP ON BED. DO NOT ALLOW
CHILDREN TO PLAY OR JUMP ON BED.
● DO NOT SMOKE ON THE BED.
● THIS IS NOT A LIFE SAVING DEVICE. DO NOT USE AS A
FLOTATION DEVICE OR AS A WATER TOY.
● DO NOT LET YOUNG CHILDREN SLEEP ON THIS MATTRESS
UNTIL MATURE ENOUGH TO SLEEP IN AN ADULT BED. YOUNG
CHILDREN CAN SUFFOCATE, ESPECIALLY IN THE CASE OF
UNEXPECTED DEFLATION. NEVER LEAVE A CHILD UNATTENDED
OR SLEEP ON SAME MATTRESS AS A YOUNG CHILD.
● FILL WITH COLD AIR ONLY. NEVER USE A HAIR DRYER TO
INFLATE.
● DO NOT MIX OLD AND NEW BATTERIES OR BATTERY TYPES.
● MAXIMUM WEIGHT: 500 LBS/226 KGS TOTAL.
Manufactured by Pure Global Brands, Inc.
West Palm Beach, FL 33411

CHECK OUT THESE PURE COMFORT™
PRODUCTS ALSO AVAILABLE FOR SALE
5-in-1 Sofa Bed w/Coil Beam Flock Top
Inates in only 5 minutes with the included electric air pump!
This sofa Recliner, Lounger and Kids’ Bed. The coil-beam top
design of all Pure Comfort Air Beds means you will actually
sleep well! The 2-in-1 valve makes inating and deating a
breeze, making this extra bed so easy to use and store.
Durable waterproof cover means the bed can be used for
camping, as well as a handy extra bed indoors. Also included
is a Repair Kit. Uses standard Queen Size sheets when used
as a Queen Bed, or standard Twin sheets when used as a Kids
Bed.
Rechargeable Electric Portable Air Pump
Great for camping and outdoor use when electric power is
inconvenient. Easy to use for inatable toys, air beds, mat-
tresses, etc. Includes 3 universal nozzles, Includes usage
instructions, AC Adapter and Car Charger.
To order the above products or to see other Pure Comfort offerings,
please visit: www.pureglobalbrands.com or call 866-498-5269.
LIMITED WARRANTY
Pure Global Brands, Inc. warrants this product to be free from defects in workmanship and materials under normal use and conditions for
a period of 90 DAYS FROM THE DATE OF ORIGINAL PURCHASE. This Limited Warranty is not transferable and is available only
for the original purchaser of the Product. The Company’s obligation under this warranty is limited to replacing or repairing the Product, at
the discretion of the Company.
All warranty coverage extends only to the original retail purchaser from the date of purchase. Pure Comfort’s™ obligation under this
Warranty is limited to replacing or repairing, at Pure Comfort’s™ option, the product at one of its authorized service centers. All products
for which a warranty claim is made must be received by Pure Comfort™ at one of its authorized service centers and accompanied by
sufcient proof of purchase (photocopy of the original store receipt, indicating the date of purchase). All freight and handling fees are the
responsibility of the consumer to pay, both to and from Pure Comfort™. All warranty claims must be pre-authorized by Pure Comfort™.
Pre-authorization can be obtained by calling 866-498-5269. This warranty does not extend to any product or damage to a product caused
by or attributable to freight damage, abuse, misuse, improper or abnormal usage, or repairs not provided by a Pure Comfort™ authorized
service center or for products used for commercial or rental purposes. This warranty does not cover ordinary wear and tear, weathering,
failure to follow directions, improper installation, improper maintenance, or acts of Nature (such as damage caused by wind, lightning,
snow, water, or ice). Weather damage, damage caused by unauthorized repair work or damage caused by improper use of the products
are not covered by the product warranty. No other Warranty beyond that specically set forth above is authorized by Pure Comfort™.
Pure Comfort™ IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY
ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL,
INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IN-
CIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE WARRANTY
EXTENDED HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES AND Pure Comfort™ SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO
THE TERMS SET FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS.
ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty gives you specic legal rights. You may also have other rights, which vary from state to state
REPAIR KIT USE:
1. Locate the leak. For small leaks, inate the bed and spray the suspected location of a leak
with water. Look for air bubbles indicating the leak source. Once found, DEFLATE the air bed.
2. Clean the affected area with soap and water, rinse thoroughly and allow to fully dry. Cut a
piece of patch material that will fully cover the puncture. Apply the self-adhesive patch to the
leak by peeling off the backing and placing it sticky side down on the air bed. Rub patch to
ensure adhesion. Allow (4) Four hours for the repair to set before attempting to inate the air
bed.
AIR BED INFLATION PRACTICES:
The air bed material may stretch during use and the mattress may need additional air over a
period of time. The air inside of the bed may expand and contract with varying temperatures
and conditions. To extend the life of this product, never unfold or inate the air bed in tem-
peratures below freezing, avoid prolonged exposure to the sun, and protect from contact with
rough ground.
PUMP INSTRUCTIONS:
Pump Requires 4 “D” Batteries. (not included).
Before inserting the batteries, always ensure the Pump is in the
“OFF” or “O” position.
1. Open the battery cover by releasing the clasp on the side of the
pump.
2. Insert 4 new “D” batteries, making sure to orient the batteries
properly to the “+” and “-” markings printed at the bottom of the
battery chamber.
3. Close the cover on the pump, making sure that the battery
terminals contact the metal plates on the inside of the cover.
4. Place the locking wire over the lock housing on the cover, and press down on the lever to
lock the cover into place.
BATTERY AND PUMP USE PRACTICES:
● CAUTION: RISK OF ELECTRIC SHOCK. DO NOT USE IN WET OR RAINY
CONDITIONS, AND EXERCISE CAUTION NEAR WATER SOURCES. NEVER EXPOSE
PUMP DIRECTLY TO WATER.
● NEVER expose the pump to heat sources or open ame.
● This pump is not intended for use with sports balls, tires, equipment with high PSI ratings
and/or other products requiring special nozzle adaptors.
● DO NOT run this pump for longer than 5 Minutes at a time. Failure to do so may cause the
unit to overheat and will diminish the lifespan of the batteries.
● NEVER mix old and new batteries, or mix battery types (e.g. rechargeable and standard, or
lithium and alkaline, etc.).
● ALWAYS follow all warnings specic to the batteries you are using in this pump.
● ALWAYS dispose of or recycle batteries in accordance with local ordinances.
● ALWAYS remove the batteries before storing your pump for extended periods.
● DO NOT allow children to use or play with this pump. It is not a toy.
● DO NOT attempt to open the pump housing or perform repairs to this pump.
● DO NOT use this pump if the plastic housing is cracked or otherwise damaged or if the
pump has been exposed to water or open ame.