PURE Highway 400 User manual

Highway 400

Introduction
Thank you for choosing the Highway400. This user manual will get you up and
running in no time.
To get the most out of your Highway, download the Pure Goapp on your mobile
device. Read more about the Pure Goapp on page14.
1

Safety
Before you use your Highway, read the following safety instructions.
1. Follow the operating instructions provided and take note of any warnings.
2. If you do not follow the operating instructions provided, it may compromise the safety of your product and this may invalidate the warranty.
3. Only use the supplied 12V power adapter with your product.
4. Do not install your product in a way that may interfere with the safe operation of the vehicle, or affect the deployment of air bags or other safety items. Do not install cables and wires near
the steering wheel.
5. Do not place your product on or near sources of your vehicle's heat or ventilation.
6. Do not use your product in a way that may cause careless driving or improper control of your vehicle.
7. Keep your product dry and only clean with a dry cloth.
8. Do not expose your product to naked flames.
9. Use batteries of the type listed in this user manual, and fit batteries correctly. Dispose of batteries in an environmentally friendly manner. Do not expose batteries to excessive heat or naked
flames.
10. Keep batteries away from children. If the battery compartment does not close securely, do not use the product and keep it away from children. If you think someone has swallowed a battery
or placed a battery inside their body, seek medical attention immediately.
11. Do not use your product in extremely hot or cold temperature.
12. If you need to connect your product to the rear of your vehicle's head unit, remove any power before you start to install your product. When you have safely installed your product, you can
reconnect the power. See your vehicle's owner's manual for more information.
13. Do not use the product if it is damaged.
14. Product repairs should only be carried out by authorised personnel.
Symbols on the product and in the user manual
Potentially serious risk to your personal safety. To avoid possible injury or death, obey all safety notices with this symbol.
Caution. Read the user manual before use.
12V DC
12V DC power supply.
1A
USBsocket rated at 1amp maximum.
Where to switch on or off the product, or put it in standby.
2

3
Introduction 1
Safety 2
Contents 3
Overview 4
What's in the box 4
Controls 5
Display icons 6
Getting started 7
Installing your Highway 7
Where to install your Highway 8
Positioning the antenna 8
Connecting the antenna 10
Installing the wireless controller 11
Switching your Highway on for the first time 12
Switching your Highway on and off 12
Digital radio 13
Listening to digital radio 13
Presets 13
Bluetooth 14
About the Pure Go app 14
Pairing your Highway with a mobile device 14
Listening to audio stored on your mobile device 15
Listening to audio from a music streaming service 15
Using your mobile device's personal assistant 15
Settings 16
Changing between auxiliary connection and FM
transmission 16
Setting your Highway to enter standby automatically 16
Radio settings 16
Display settings 17
Updating the software 18
Troubleshooting 19
Contents

Overview
What's in the box
Before you get started, check you have everything below.
1 2
3
6
4
7
5
8
1Antenna, with magnetic grounding tail attached 5Cleaning cloth
2DAB film aerial 6Wireless controller bracket
3Wireless controller 712V power adapter (dual USB port)
4Two AAA batteries 8Self-adhesive cable clips
4
Restrictions for use - to be used only with items shown on this page and configured/installed/used according to this manual.

Controls
3
2
4
6
7
5
1
1 Select Turn to browse radio stations, songs and menu options. Press to select.
2 Previous Press to skip to the previous song or preset.
3 Power / Back Press to switch your Highway on. Press and hold to put your Highway in standby. Press to go back to the previous screen or
cancel an action.
4 Go Press to stream audio from your music streaming service. Press and hold to identify the current song on the radio and add it to
your supported streaming service.
To use the Go button, install the Pure Go app on a mobile device and connect it to your Highway.
5 Play / Personal
assistant
Press to play or pause songs over Bluetooth, or mute the radio. Press and hold to use the personal assistant on your mobile
device.
6 Home / Presets Press to open the main menu. Press and hold to view your presets.
7 Next Press to skip to the next song or preset.
5

Display icons
The icons below appear on the screen of the wireless controller.
2
BBC R2
1
1Digital radio mode 2Bluetooth mode
6

Getting started
Installing your Highway
Before you can start using your Highway,you need to do the following:
1. Position the antenna in your vehicle.
2. Connect the antenna to your vehicle's audio system, either with an auxiliary cable or by FM radio.
3. Install the wireless controller.
4. Switch your Highway on for the first time.
To watch a video showing how to install your Highway, search for 'Highway installation' on YouTube.
Vehicle requirements
lFitted audio system with auxiliary (3.5mm) port or FM receiver.
lStandard 12V negative earth power supply. Your Highway is not suitable for use with a 24V power supply.
Getting the bestDAB signal
As with FMradio, DAB signal coverage changes depending on your location. As you use the Highway in your vehicle, you may travel
through areas where DAB signal coverage is poor. To help get the best DAB signal when coverage is poor or there is a weak signal:
lFollow the installation instructions carefully.
lEnsure the magnetic grounding tailis attached to the antenna.
lUse the supplied 12V power adapter, as other third-party adapters can cause interference.
lSwitch off other devices in your vehicle that aren't in use. Devices such as satellite navigation systems and dashboard cameras
can cause interference.
7

Where to install your Highway
It's important to install your Highway in a safe location in your vehicle. Do not fit any components in locations that may
interfere with safe operation of the vehicle, or affect the deployment of air bags or other safety products. Keep cables and
wires away from the steering wheel.
Where to install the antenna
We recommend you install the antenna for your Highway in
the top corner of the windscreen, on the passenger's side of
your vehicle.
Install the antenna so that it is not within the swept area of
the windscreen. Make sure the antenna and wireless
controller do not obstruct the view of the driver.
If you have a heated windscreen in your vehicle, or the windscreen contains metallic UVfilters, it can cause interference for the DAB
signal. Install the antenna on a part of the windscreen that does not contain heating elements or UV filters.
For more information on where to safely and legally install your Highway in your vehicle, contact your local transport office. To find
local fitters that can install your Highway professionally, visit pure.com/store-locator.
8

Positioning the antenna
1. Choose a position for the antenna, so that it's as high as possible on the windscreen
and at least 4cm from the side of the screen.
Make sure the antenna does not obstruct the view of the driver.
2. Gently pull down the front of the roof liner in your vehicle, until there is a small gap.
3. Push the magnetic grounding tail through the gap, with the silver-coloured magnet
facing upwards. Make sure the magnet touches your vehicle's metal bodywork.
4. Clean the chosen area of the windscreen with a cleaning cloth and wait for it to dry.
5. Unpeel the backing from the antenna and stick the antenna onto your windscreen.
6. Insert the DAB film aerial into the slot in the antenna.
7. Gently unpeel the backing from the DAB film aerial and stick the aerial onto your
windscreen. Take care not to fold or twist the aerial.
9

Connecting the antenna
1. Place the antenna cable so that it follows a path to your vehicle's power socket.
2. If possible, tuckthe cable behind the trim down the side of your windscreen.
Alternatively, secure the cable to your windscreen and dashboard with self-adhesive
clips.
3. Gentlypullthe auxiliary cable from the USBpower cable to separate them.
4. Insert the USB power cable into the supplied 12V power adapter, then insert the
power adapter into your vehicle's power socket.
5. If you're connecting your Highway with an auxiliary cable, insert the cable into your
vehicle's auxiliary socket. If you're connecting your Highway by FM radio, you can
store the auxiliary cable so it's out of the way.
We recommend you connect your Highway with an auxiliary cable to get the best
audio quality.
10

Installing the wireless controller
1. Slide the backcover off of the wireless controller and insert the batteries, then
replace the cover.
2. Choose an area on your vehicle's dashboard where you want to installthe wireless
controller. Clean the surface with a cleaning cloth and wait for it to dry.
Make sure the wireless controller does not obstruct the view of the driver.
3. Peeloff the backing from the wireless controller bracket and gently stick it onto your
dashboard. Gently press the bracket to ensure it's attached securely.
4. Slide the wireless controller onto the bracket, until it clicks into place.
11

Switching your Highway on for the first time
After you've installed your Highway, switch it on to finish setting it up.
1. Turn on your vehicle’s ignition to make sure the antenna is switched on. After a few seconds, the wireless controller automatically
connects to the antenna. If not, see page19.
2. Turn the Select dial to change the display language, then press the Select dial to choose it.
3. Turn and press the Select dial to choose how to connect your Highway to your vehicle.
•If you've connected your Highway with an auxiliary cable, choose ‘LINEOUT’.
•If you're connecting your Highway by FM radio, choose ‘FMTRANSMIT' and then choose an FM frequency. Ensure a radio
station isn't using the frequency you choose.
Tune your vehicle’s audio system to the same FM frequency your Highway.To easily find the FM frequency in the
future, save it as a preset on your vehicle’s audio system.
After you’ve chosen how to connect your Highway,it starts tuning to digital radio stations. When the autotune is complete, you can
start listening to digital radio.
Switching your Highway on and off
•To switch on your Highway, press.
•To put your Highway in standby and use less power, press and hold.
Note: By default, the antenna automatically enters standby after 4hours, and the screen on the wireless controller dims after
15seconds. Read more about the display brightness on page17.
12

Digital radio
Listening to digital radio
1. Press.
2. Press the Select dial to choose 'DIG. RADIO'.
3. To change to another radio station, turn and press the Select dial.
Presets
You can save up to 20 of your favourite digital radio stations in the presets list.
Storing a radio station as a preset
1. When listening to a radio station, press and hold.
2. Turn the Select dial to choose a preset number. You can overwrite previous radio stations.
3. Press and holdto save the current radio station to the preset number.
Listening to a preset
1. When listening to digital radio, press and hold.
2. Turn and press the Select dial to choose the preset you want to listen to.
To skip to the previous or next preset, pressor.
13

Bluetooth
About the Pure Go app
To get the most out of your Highway,download the Pure Go app on your mobile device. The Pure Go app provides the following
features:
Play. Access allof your songs and playlists on your music streaming service.If you use Spotify, a premium subscription is
required.
Identify. If you hear a song you like on a radio station, press and hold to identify the song using the microphone on
your mobile device. The song is then added to a Pure Go playlist on your music streaming service.
Personalassistant. Pressand hold to connect to your mobile device's personal assistant.
Update. The Pure Go app notifies you when a new software update is available and allows you to update your Highway.
Read more about updating the software on page18.
To pair your Highway with the Pure Go app,installthe app on your mobile device and then follow the setup instructions in the app.
Pairing your Highway with a mobile device
You can use Bluetooth to wirelessly connect to a mobile device. You can then stream musicfrom your mobile device.
1. Switch on Bluetooth on your mobile device.
2. Presson the wireless controller for your Highway.
3. Turn and press the Select dial to choose 'SETTINGS' > 'BLUETOOTH' > 'PAIR' > 'BTMUSIC'.
4. On your mobile device,choose your Highway from the list of Bluetooth devices and connect to it.
After you've paired a mobile device with your Highway, your Highway automatically connects to it when it's nearby.
To forget a paired mobile device on your Highway, press. Then choose 'SETTINGS'> 'BLUETOOTH' > 'FORGET'. To forget a
paired Pure Go app, remove Pure Go from the list of paired devices on your mobile device.
14

Listening to audio stored on your mobile device
If you connect your Highway to a mobile device using Bluetooth, you can play music that is stored on your mobile device.
1. Press .
2. Turn and press the Select dial to choose 'BTMUSIC'.
3. Turn and press the Select dial to choose a song to play.
4. To skip to the previous or next song, press or. To play and pause the current song, press .
Note: If you see 'BROWSENOT AVAILABLE', your mobile device or the current app does not support browsing.
If you see '+',the item is a folder that contains audio files.Press the Select dial to open the folder.
Listening to audio from a music streaming service
If you use the Pure Go app to connect to your Highway, you can listen to audio from a music streaming service.
1. Press .
2. Turn and press the Select dial to choose an artist, playlist, album or song.
3. To play and pause the current song, press . To skip to the previous or next song, press or .
Using your mobile device's personal assistant
If you connect your Highway to the Pure Go app using Bluetooth, you can use it to access your mobile device's personal assistant.
1. Press and hold .
2. When prompted, ask a question to your mobile device's personal assistant.
To cancel your mobile device's personal assistant, press or .
15

Settings
Changing between auxiliary connection and FM transmission
You can choose how your Highway is connected to your vehicle's audio system.
1. Press.
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUDIOOUT'.
3. Turn and press the Select dial to choose how to connect your Highway to your vehicle.
•If you've connected your Highway with an auxiliary cable, choose ‘LINEOUT’. Then turn and press the Select dial to choose
a gain setting of 'LOW' or 'NORMAL'. If the audio sounds distorted, choose 'LOW'.
•If you're connecting your Highway over FM radio, choose ‘FMTRANSMIT' and then choose an FM frequency. Ensure a
radio station isn't using the frequency you choose.
Setting your Highway to enter standby automatically
By default, your Highway enters standby after 4hours, but you can change the delay.
1. Press.
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUTOSTANDBY'.
3. Turn and press the Select dial to choose a delay between 1 and 8 hours.
Radio settings
Performing an autotune
If you can't find any digital radio stations, try retuning your Highway.
lTo perform an autotune, press and hold the Select dial when you are in digital radio mode.
Listening to alternative stations when the signal is weak
If the current radio station has a weak signal, your Highway automatically tries to find a stronger signal.If your Highway can't find a
stronger signal for the current radio station, it can automatically tune to a similar radio station when supported by the broadcaster.
16

1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'DIG. RADIO' > 'ALTSTATION'.
3. Turn and press the Select dial to choose 'ON' or 'OFF'.
Switching traffic announcements on and off
You can set your Highway to automatically play traffic announcements when you are listening to digital radio.When your Highway
plays traffic announcements, it displays 'TRAFFIC'.
1. Press.
2. Turn and press the Select dial to choose 'SETTINGS' > 'DIG. RADIO' > 'TRAFFICMSG'.
3. Turn and press the Select dial to choose 'ON' or 'OFF'.
To cancel a traffic announcement when it plays, press.
Display settings
Changing the language
1. Press.
2. Turn and press the Select dial to choose 'SETTINGS' > 'DISPLAY' > 'LANGUAGE'.
3. Turn and press the Select dial to choose a language.
Changing the information displayed on the screen
Your Highway can display the name of the radio station you are listening to,or the quality and signal strength of the station.
1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'DISPLAY' > 'INFO'.
3. Turn and press the Select dial to choose a setting.
lTo display the names of radio stations, choose 'STATION'.
lTo display the quality and signal strength of radio stations, choose 'QUALITY'.
Changing the screen brightness
A light sensor on the wireless controller automatically sets the screen brightness, but you can manually change it. 17

1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'DISPLAY' > 'BRIGHTNESS' > 'MANUAL'.
3. Turn and press the Select dial to choose a brightness level.
By default, the screen on the wireless controller automatically dims after 15seconds. To change the length of time before the
screen dims, choose 'SETTINGS' > 'DISPLAY' > 'TIMEOUT'.
Updating the software
We may provide software updates to improve your Highway.If you have the Pure Go app, it notifies you when a software update is
available. You can then use the Pure Go app to update the software on your Highway.
Note: Features of the Pure Go app may vary depending on the mobile device and app version.
To find out about other ways you can update your Highway, visit pure.com/highway-update.
18