PURE 9040MTH User manual

40” MINI TRAMPOLINE WITH HANDRAIL
MODEL# 9040MTH
PRODUCT MANUAL  VERSION 08.17.08
CUSTOMER SERVICE
[e-mail] 1-866-498-5269 GQBrands.com 4401 Samuell Blvd, Ste 150, Mesquite, TX 75149
FOR AGES:
13+ 1
X
WEIGHT LIMIT:
220Lbs
100 Kgs
TO BUILD: TOOLS NEEDED:

[e-mail] 1-866-498-5269
CUSTOMER SERVICE INFORMATION
Thank you for purchasing:
40” MINI TRAMPOLINE WITH HANDRAIL
MODEL# 9040MTH
YOUR NAME: _________________________________________
YOUR MAILING ADDRESS: _______________________________
YOUR EMAIL ADDRESS: ________________________________
PRODUCT NAME: _____________________________________
PRODUCT MODEL#: ___________________________________
PART NUMBER _______________________________________
RETAILER WHERE PURCHASED:__________________________
DATE OF PURCHASE: __________________________________
ORDER NUMBER:
(If Available) ____________________________
SERIAL NUMBER:
(If Available) ____________________________
QUANTITY NEEDED: ___________________________________
PICTURE OF DAMAGED PART
At GQBrands®, we want all of our customers to be completely
satisfied with their purchase. Take time to review the contents of the
product you have just received to make sure that all of the parts are
included. If you find that any parts are missing or damaged, we will
provide replacement parts at no charge within 30 days of purchase.
Please keep in mind that for select damaged part replacement
requests, we will require a photo for submission.
To order these parts, or if you have any other questions or concerns
about this GQBrands product, please contact us at
PureFun.Net
Phone: [phone]
Email: CustomerServic[email protected]
4401 Samuell Blvd, Ste 150, Mesquite, TX 75149
Please be sure to include the following information when you contact Customer Service:
LIMITED WARRANTY
Global Quality Brands® warrants this product to be free from defects in
workmanship and materials under normal use and conditions for a period of 90
DAYS FROM THE DATE OF ORIGINAL PURCHASE. This Limited Warranty is not
transferable and is available only for the original purchaser of the Product. The
Company’s obligation under this warranty is limited to replacing or repairing the
Product, at the discretion of the company.
All warranty coverage extends only to the original retail purchaser from the date
of purchase, GQ Brands obligation under this warranty is limited to replacing or
repairing, at Global Quality Brands® option. All products for which a warranty
claim is made must be received by Global Quality Brands® and accompanied by
sufficient proof of purchase (photocopy of the original store receipt, indicating
the date of purchase). All freight and handling fees are the responsibility of the
consumer to pay, both to and from Global Quality Brands®. All warranty claims
must be preauthorized by Global Quality Brands® pre-authorization can be
obtained by calling 866-498-5269.
This warranty does not cover ordinary wear and tear, weathering, failure to follow
directions, improper installation, improper maintenance, or acts of nature, (such
as damage caused by wind, lightning, snow, water, or ice) weather damage,
damage caused by unauthorized repair work or damage caused by improper use
of the products are not covered by the product warranty. No other warranty beyond
that specifically set forth above is authorized by GQBrands®.
GLOBAL QUALITY BRANDS® IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT,
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH
RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE
OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION
OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
ACCORDINGLY,
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE WARRANTY EXTENDED
HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES AND GLOBAL QUALITY
BRANDS®, SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN
ITS SCOPE AND DURATION TO THE TERMS SET FORTH HEREIN. SOME STATES
DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS.
ACCORDINGLY, THE ABOVE LIMITATION MAY NO APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE.
WHILE EVERY ATTEMPT IS MADE TO ENSURE THE HIGHEST DEGREE OF
PROTECTION IN ALL EQUIPMENT, WE CANNOT GUARANTEE FREEDOM
OF INJURY. THE USER ASSUMES ALL RISK OF INJURY DUE TO USE. ALL
MERCHANDISE IS SOLD ON THIS CONDITION, WHICH NO REPRESENTATIVE OF
GQBRANDS® CAN WAIVE OR CHANGE.

3
MODEL# 9040MTH
LIMITED WARRANTY
• This unit is designed only for jogging in place
and similar bounding exercises.
• Not recommended for children under 13
years of age.
• Maximum weight limit: 220lbs. (100kgs)
• Children under 13 MUST NEVER use
the trampoline unless supervised by
a responsible adult with knowledge of
trampoline use. DO NOT leave children
unattended at any time.
• Caution and care must be taken in
underneath a light or ceiling fan.
• The contents are not suitable for children
under 3 years of age. This product contains
small parts, which may cause choking.
• This trampoline is designed for one user only.
Do not let more than one person use this
product at the same time.
• Immediately discontinue use if any breakage
to the frame assembly or springs are found.
Failure to do this may result injury and/or
further damage to the product.
• This trampoline is only designed for normal
residential use. It is NOT intended for
commercial applications and/or in public
areas such as schools, parks, day cares,
commercial/communal gyms, etc.
• When in use, your trampoline must be
placed at a safe distance from any vertical or
horizontal obstructions, such as stairways/
stairwells, power lines, ceiling fans, pools,
walls, overhead or wall light fixtures,
windows, furniture, appliances, etc. Keep on
a level surface.
• DO NOT store trampoline outdoors or
where exposed to moisture or extreme
temperatures.
• Ensure area under and around trampoline is
clear of any toys/obstacles that may cause
injury.
• DO NOT wear glasses or helmets when using
the trampoline.
• DO NOT store items, playthings, or place any
obstructions underneath the trampoline mat.
• Users should not wear clothing, jewelry, or
anything could catch or snag on the product
(e.g. loose clothing, cords, shoulder bags).
• DO NOT fall or bounce on your knees,.This
can cause injury.
• DO NOT somersault. This can cause serious
injury, paralysis, or death.
• DO NOT allow infants or animals to crawl
underneath the trampoline mat.
• DO NOT use or allow use of the trampoline
under the influence of any substance
or medication which may impair the
supervisor’s or jumper’s judgment and/or
coordination.
• Users should stand or bounce as near to the
center of the mat as possible. Bouncing or
standing near the edge of the trampoline
could cause the frame to tip over or damage
the mat/springs.
• Do not allow small children to wander into the
play area where the trampoline is in use.
• ALWAYS secure the trampoline against
unauthorized and unsupervised use.
• Before each use, inspect and replace
any worn, defective or missing parts. It is
important to check the trampoline to ensure
the frame is steady and all parts are in good
condition.
• Before each use, make sure the frame
padding is in place with the springs and
frame fully covered.
• ALWAYS make sure to store your trampoline
safely, where it will not present a tripping or
obstacle hazard.
• Dispose of all packaging materials safely and
per local ordinance.
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD - Small Parts
NOT for children under 3 years of age.
Please read these warnings and the information in this manual in its entirety.
Failure to comply with the following instructions may increase the risk of serious injury and/or death:

[e-mail] 1-866-498-5269
PARTS LIST
1 -
3 -
4 -
9 - 11 -
10 - 12 -
13 - 15 -
14 -
5 - 6 - 7 -
8 -
2 -
x1
x1 x6
x1
x8
x2
x1 x4
x36
x18
x16
x8 x4
x12
x4
Frame
Spring
W-Hook
Nut Frame Pad
Washer Leg with Cap
Straight Pole U-Shaped BracketHandle Bar with Foam Grip
T-Section Piece Cross-Section Piece 40mm Carriage Bolt
50mm Carriage Bolt
Jumping Mat

5
MODEL# 9040MTH
ASSEMBLY INSTRUCTIONS
T-Section Locations
STEP 1:
NOTE:
The Frame Pad (Part 11) may be already
attached to the Frame, remove it and place
it aside until Step 4
The Frame (Part 1), Jumping Mat (Part 2),
Springs (Part 3), & W-Hooks (Part 4) should
be assembled in one piece.
Place assembled Frame on an even, clean,
& flat surface to install. Make sure that
there are no obstructions in your way when
building the Mini Trampoline.
NOTE:
Make sure that the spring ends are facing
up, and the logo printed on the Jumping
Mat is facing the floor.
Identify all openings
on the Frame Pad.
There are four
sections with 1
opening (A), and
two sections with
2 openings (B).
B
A
A
A
A
B
B
A
Assembled Frame

[e-mail] 1-866-498-5269
STEP 2:
Parts:
8x T-Section Pieces (Part 5)
4x 40mm Square Neck Bolts (Part 7)
4x Nuts (Part 9)
4x U-Shaped Bracket (Part 15)
Locate the (A) openings in the frame
(Shown in Page 5) to begin installing the
T-Sections Pieces into the Frame.
A. Place a T-Section Piece on the outside
of the frame and the other half from the
inside of the Frame. Make sure that the
T-Sections are facing up to install the
legs in Step 6.
Insert a U-Shaped Bracket (15) to both
T-Sections from the bottom.
NOTE: The square opening of the
U-Shaped Bracket must face the outside
of the frame, and the round opening of
the bracket must face the inside of the
frame, facing the mat.
B. Insert a Bolt (Part 7) from the outside of
the frame to show the smooth surface
between both T-Section Pieces. Secure
with a Nut (Part 9). Tighten loosely.
NOTE:
Make sure Bolt is fully inserted and the
Nut is not fully tightened. This will help
inserting the Legs in Step 6.
C. Continue to install all T-Sections in the
remainder of the (A) openings of the
frame.
ASSEMBLY INSTRUCTIONS
(5) (5)
(7) (9)
(15)
Tighten
Loosely
Square
Opening
Round
Opening

7
MODEL# 9040MTH
ASSEMBLY INSTRUCTIONS
(6)
(8) (9)
x2 Units x2 Units
(6)
Tighten
Loosely
A
B
STEP 3:
Parts:
4x Cross-Section Pieces (Part 6)
4x 50mm Square Neck Bolts (Part 8)
4x Nuts (Part 9)
4x Washers (Part 10)
Locate the (B) openings in the frame
(Shown in Page 5) to begin installing the
Cross-Sections Pieces into the Frame.
A. Place a Cross-Section Piece on the
outside of the frame and the other
half from the inside of the Frame. All
openings should line up.
B. Insert x2 Bolts (8) from the outside of
the frame to show the smooth surface
between both Cross-Section Pieces.
Secure both with a Nut (9) on each one.
Tighten loosely.
Repeat this process to assemble the
second Cross-Section on the Frame.
NOTE:
Make sure Bolt is fully inserted and the
Nut is not fully tightened. This will help
inserting the Legs in Step 6.

[e-mail] 1-866-498-5269
ASSEMBLY INSTRUCTIONS
ASTEP 4:
Parts:
1x Frame Pad (Part 11)
A. Flip the Assembled Frame in order to
place the Frame Pad (11).
Make sure to locate all six loops in the
Frame Pad, two of them should have two
openings assigned for the Cross-Section
Pieces. Place on top Frame to cover the
Frame & Jumping Mat.
B. For the T-Sections, hook all loops in the
inserts openings of the T-sections before
installing the legs.
C. For the Cross-Sections, make sure both
openings of the Cross-Section go inside
the according hoops in the Frame Pad.
Hook the loop into the bottom section of
the Cross Section.
Once the Frame Pad is placed, flip the
frame again so the Jump Mat faces the
ground to begin installation of the legs.
B
(11)
Hook all T-Sections with
loops from Frame Pad
Line up all loops to a
T-Section when placed on
top of Frame & Jump Mat
Line up hoops
in Frame Pad
to upper Cross-
Section Pieces
Insert Frame
Pad openings
from the top
and hook loops.
CHOOP

9
MODEL# 9040MTH
ASSEMBLY INSTRUCTIONS
STEP 5:
Parts:
6x Legs with Caps (Part 12)
NOTE:
If the Caps from the Leg Poles are not
already placed after unboxing, make sure to
insert them on the opposite side of where
the openings are located as shown. This
will make sure that the openings are clear
when installing into the Frame. Repeat this
process until you have all six assembled
Legs with Caps.
STEP 6:
Place all assembled legs inside the inserts.
Align openings from the T-Sections &
Cross-Sections to the Legs.
STEP 7:
Parts:
4x 40mm Square Neck Bolts (Part 7)
4x Nuts (Part 9)
4x Washers (Part 10)
A. Insert a Bolt (7) from the outside of the
Frame and secure tightly with a Washer
(10), & Nut (9). Make sure Bolt is fully
inserted.
B. Repeat this process until all legs in
T-Sections are installed properly and
securely.
NOTE:
Do not Tighten any Nuts from the Cross-
Section Pieces. Doing so will make it
difficult to install the Straight Poles.
(12)
x6 Assembled Legs
(7) (9)(10)
Tighten
Tighten

10 [e-mail] 1-866-498-5269
(7)
(7)
(9)
(9)
Tighten
Fully
Tighten
Fully
Tighten
Fully
ASSEMBLY INSTRUCTIONS
STEP 8:
Parts:
2x Straight Pole (Part 13)
2x 40mm Square Neck Bolts (Part 7)
2x Nuts (Part 9)
2x Washers (Part 10)
A. Insert x2 Straight Poles (13) into the
upper openings of the Cross-Sections.
NOTE:
Straight poles upper openings must face
the center of the trampoline.
B. Locate x2 40mmm Square Neck Bolts
(7), x2 Washers (10), and x2 Nuts (9).
Insert a Bolt from the inside facing out to
each Straight Pole. Tighten both with a
Washer & Nut.
NOTE:
If the Bolts are not inserted from the
outside in, you leave yourself exposed to
the sharp edges of the Nuts. Failure to do
so can result in injury.
C. Once the bolts are inserted properly,
tighten remainder of all nuts to secure
the Straight Poles and Legs to the
Cross-Section Pieces.
A
B C
Facing
Center Facing Center
(10)
(10)

11
MODEL# 9040MTH
ASSEMBLY INSTRUCTIONS
STEP 9:
Parts:
1x Handle Bar with Foam Grip(Part 14)
Place Handle Bar with Foam Grip (14) on
top of Straight Poles. Both ends must be
inserted at the same time.
Stop when you hear both the buttons “Snap
& Click” in the openings.
To adjust to your desired height, simply
press the buttons in and slide the pole to a
desired opening.
IMPORTANT:
Handle Bar must be snapped on the same
height for both openings. Failure to do
this will cause the Poles to bend, snap, or
break. Failure to do so may result in injury
to the user.
(14)

12 [e-mail] 1-866-498-5269
GQBrands®
1-866-498-5269
CustomerServic[email protected]
4401 Samuell Blvd, Ste 150
Mesquite, TX 75149
NOTES CUSTOMER SERVICE