Pyle Pro PDJSIU200 User manual

AB
MAIN OUT
AB
I MIXER
PDJSIU200
iMixer Dual iPod DJ Player
w/Scratch and Sound Effects
www.
py
leaudio.com

I MIXER
Digital Sound Effects with DJ Scratch
Features:
with 2nd to 5th Generation iPods and mp3 players
MAC or PC by using the freeware recording software Audacity
available at www.audacity.de.
moving from one to another, or to cue up a new song
occurrence of a fade-in and a fade-out
headphones
included)
iPod/MP3 Player/USB:
signal sources: iPod * 2, MP3 player * 2, USB input * 1
Sound effects of Flanger、Echo、Trans、Pan、Filter Compatible
Microphone and main out cue and mix
USB output for easily transferring music from i MIXER to your
Select from five different Effects Programs
Switch headphones between Main and Cue
Switch between original audio output and mix sound effect
Use the Cross-Fade slider to blend your 2 music sources while
Cross-Fade music mix from source A to source B; simultaneous
Cue channel lets you monitor the faded Source through your
JOG wheel simulates the scratch feature on a DJ turntable
Edit music to a computer through USB cable (software not
The i Mixer can be used with five different combinations of
iPod will be charged when inserted into i MIXER
1 2

13.USB SOCKET
USB output for easily transferring music from i MIXER to your MAC or PC by
using the freeware recording software Audacity available at
http://audacity.sourceforge.net/download
IMPORTANT
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
FUNCTION
1.POWER BUTTON
Press the power switch to turn the unit on.To switch the POWER off press the
POWER switch again.
2.SCRATCH BUTTON
Dial the jog for SCRATCH function.
3.MAINOUT LEVEL
Adjust master level output.
5.CUE LEVEL CONTROL
18.HEADPHONE JACKS
Used to connect for audio monitoring with headphones.
4.DJ MIC
Adjust microphone level.
9.REPLACEABLE CROSSFADER
17.MIC INPUT
Plug microphone plug in here.
15.INPUT
Plug in the line level device such as tape deck.
12.LINE OUT
The audio for each iPOD player is an output for these jacks.
6.MIC SWITCH
-When switch to “OFF”, MIC turned off
-When switch to “ON”, MIC turned on.
-When switch to “EFFECT”, MIC is turned on and passing through EFFECT.
7."CUE" SWITCH
-When switch to “Main”, headphone is the mian output.
-When switch to “CUE”, headphone get sound from another channel.
8.EFX SEL
Used to turn the effector on or off and choose effector(Flangle, Filter,
Trans, Pan, Echo)
10.time shuttle wheels
Used to adjust the time parameter of the effector.
11.Depth Shuttle Wheels
Used to adjust the depth parameter of the effector
16. DC CONNECTOR
The connector for attached power selector.
14.CH A INPUT SELECTOR
-Switch to “AUXA”, choosing IPOD/AUXA input
-Switch to “USB”, choosing USB input
Remark:This selector only control channel B.
Achieves clean segues between the two input channels.Hard left selects channel
1.“Hard right”selects channel 2.with the crossfader centered,both assigned
channels are live use the crossfader for fast and seamless segues from one
selected channel to the other.
19.IPOD PORT
Insert the IPOD.
16
15
14
13
12
18
17
1
2
3
45
67
8
9
10 11
19
AB
MAIN OUT
AB
RL
LINE OUT AUX IN AAUX IN B 5V DC
USB USB AUX A
34
I MIXER