Pyle view PLTS76DU User manual

PLTS76DU
USER MANUAL
7'' Single DIN In-Dash Detachable Motorized Touch Screen TFT/LCD Monitor
w/ Digital Video/CD/MP3/MP4/USB/SD/AM-FM-RDS Player

To ensure safety while driving
and to comply with laws,
drivers should not watch video or
operate the video device while driving.

Content
-1-
Precaution......................................
Safety Information.........................
Disc Note.......................................
Installation ....................................
Detaching control panel ....................
Attaching control panel .....................
Electric Connection ......................
Remote Control ...........................
Basic Operation............................
Loading/Ejecting a DISC .................
Open/Close Monitor and Angle
Adjustment......................... ........
TFT Monitor Adjustment ................
Audio Quality Adjustment.................
Setting Time...................................
Setting Audio Mode .........................
Reset Factory Settings....................
Rear View Camera ........................
External Audio Source ....................
Control Panel ................................
Unit keys ........................................
Radio Operation............................
Listening to radio ...........................
Storing and Listening to a Memory
station......................................
Automatic memory storing &
program scanning.......................
RDS Function ................................
Media Operation............................
Basic Operation..............................
Selecting Play Modes......................
On-Screen Display Function............
28
28
28
28
29
29
31
32
33
34
35
36
37
38
39
2
3
4
5
7
8
9
10
13
13
13
14
15
15
16
16
16
16
17
17
20
20
21
21
21
24
25
25
27
Digital Video Special Function.......
Multi-subtitle language function........
Multi-audio language function...........
Title menu function ..........................
Media Setup Menu..........................
System Setup..................................
Language Setup..............................
Video Setup ....................................
Digital Setup ...................................
AUX Operation...............................
USB Operation...............................
SD/MMC Card Operation................
MP3/WMA/JPEG/MPEG4 Play..........
Specification.................................
Troubleshooting ...........................

-2-
Precaution
THANK YOU FOR PURCHASING THIS CAR DIGITAL VIDEO PLAYER .
Before operating the unit, read this manual thoroughly and keep it handy
for future reference .
To avoid injury or accident , read the following precautions before
installing and operating the unit .
ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL
Do not press on the LCD panel on the unit as doing so can distort the
picture or cause a malfunction . The picture may become unclear , or the
LCD panel may be damaged .
NOTES ON CLEANING
-Clean the LCD panel with a slightly damp soft cloth.
-Do not use solvents such as benzine, thinner, commercially available
cleaners or antistatic spray .
-Do not use alcohol to clean the screen .
If your car was parked in a cold or hot place, the picture may not be clear .
The monitor is not damaged . The picture will become clear the temper-
ature in your car becomes normal .
DO NOT install any receiver in locations where;
- it may obstruct the steering wheel and gearshift lever operations, as this
may result in a traffic accident.
- it may obstruct the operation of safety devices such as air bags, as this
may result in a fatal accident.
- it may obstruct visibility.
DO NOT operate any receiver while manipulating the steering wheel, as
this may result in a traffic accident.
The driver must not watch the monitor while driving.
IF THE DRIVER watches the monitor while driving, it may lead to
carelessness and cause an accident.
IF YOU NEED to operate the receive while driving, be sure to look ahead
carefully or you may be involved in a traffic accident.
IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the
monitor, and no playback picture will be shown.
- This warning appears only when the parking brake wire is connected to
the parking brake system built in the car ( refer to the electric connection)
ON INSTALLATION

-3-
Safety Information
CAUTION:
THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER
THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
REGION MANAGEMENT INFORMATION:
This Digital Video Player is designed and manufactured to respond to the Region
Management Information that is recorded on a Digital Video disc. If the Region
number described on the Digital Video disc does not correspond to the Region
number of this Digital Video Player, this Digital Video Player cannot play this disc.

-4-
Disc Note
Preparing New Discs with Rough
Spots
A new disc may have rough edges on
its inside and outside edges. If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc. Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right. To remove the
rough edges, press the side of the pen
or pencil against the inside and outside
edges of the disc.
Rough spots
on
outside edge
Ball point pen
or pencil
Rough spots
on inside
edge
Do not touch
the
underside
of the disc
Do not
bend
Wipe the disc from
center
toward the outside
edge
Label side
up
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Discs which cannot be played
with this player
Digital Video-RAM
CDV
CDG
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Disc formats supported by this
player
Digital
Video
VCD
CD
MP3
Audio and Video
Disc size 12 cm
Audio and Video
Disc size 12 cm
Audio
Disc size 12 cm
Audio
Disc size 12 cm
Digital
Video
VCD
CD
MP3

-5-
NOTES:
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure
it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use
of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
Install the unit where it does not get in the driver s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, from the heater, or where it would be
subject to dust, dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front"(conventional DIN
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded
screw holes at the sides of the unit chassis). For details, refer to the following
illustrated installation methods.
'
Installation
30

-6-
Installation
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove
the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into
left and right side of chassis as above illustration.
Installating the unit
DASH BOARD
METAL MOUNTING
STRAP
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
SCREWDRIVER
TABS
KEY PLATE
PLASTIC TRIM OUT
KEY PLATE

-7-
Installation
How To Remove And Install The Front Panel
When detaching or attaching the control panel, be careful not to damage the
connectors on the back of the control panel and on the panel holder.
Detaching Control Panel
Before detaching the control panel, be sure to turn off the power.
1). Press the “REL” release button and the right hand side of front pane will release
REL button
2). Put the front panel in the protective case for safe keeping.
protective case
12
1
2
First pull up the panel as the direction indicated by the arrow (See )And then
taking out the panel as the direction indicated by the arrow (See ).

-8-
Hollow
Bulge
ATTACHING CONTROL PANEL
Installation
1). First, insert the left side of the front panel into the main unit(SEE ).
(Note: the “Hollow ” point on the front panel must be attached into the “Bulge”
point of the unit . )
2). Gently push the right-down hand side of the front panel until you feel a “ Click” .
(SEE )
Precautions
Do not touch the contacts on the front panel or the unit body, since this may
result in poor electrical contact. If dirt or dust accumulates on the contacts ,
wipe them with a clean, dry cloth .
1
2
1
2

Electric Connection
-9-
WIRING CONNECTION
Note:
the earth connection cable (parking brake B-) must be connected in order for
pictures to be played back to the monitor. If the cable has not been correctly
connected, the message “PARKING BRAKE” appears on the monitor.
RCA CABLE
SUBWOOFER GREY
VIDEO IN YELLOW
RCH RED
LCH WHITE
REAR RCA OUTPUT
CABLE
FRONT RCA WHITE L
FRONT RCA RED R
VIDEO OUT YELLOW
FRONT RCA OUTPUT
CABLE
REAR CAMERA INPUT YELLOW
BROWN
(B+)12V
REAR CAMERA SWITCH
(B-)PARKING BRAKE
GREY
GREY/BLACK
FRONT
RCH SPK.
VIOLET
VIOLET/BLACK
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
REAR
LCH SPK.
AUTO ANTENNA
BLUE
GROUND(B-)
MEMORY BACK-UP(B+)
IGNITION SWITCH(B+) RED
YELLOW
BLACK
REAR
RCH SPK.
FRONT
LCH SPK.
CHOKE
BOX
RADIO ANTENNA JACK
PINK
ISO CONNECTOR

Remote Control
-10-
6
5
Button
Ref # Function
1
2
CLK Press it briefly to view the clock time .
MODE Press it to select a desired work source.
3STOP
Press once to pause playback. Press PLAY/PAUSE to resume
playback. Please note: if you press STOP twice, playback will
start at the beginning of the disc.
SETUP
4Press this button to open the SETUP menu.
MO/ST
(AUDIO)
In Radio mode, press this button to change between Mono and
Stereo reception modes (when a station is weak, sometimes
switching to Mono will improve sound quality). In Disc Playback
mode, pressing this button opens the AUDIO setup menu for
making changes to the way the soundtrack is reproduced.
SUBTITLE
LOCAL/
DISTANT
In Digital Video Disc Playback mode, pressing this button will
allow you to change the subtitle language on discs which have
this as an option. In Radio mode, press this button to change the
radio reception sensitivity in stations are near or far.
REPEAT
7Pressing the button will open a menu presenting you with the
playback repeat options available for that kind of disc .
15
17
19
13
14
7
2
6
24
11
18
3
16
5
20
1
21
27
9
12
10
4
8
26
23
22
25
MENU
MENU
SETUP
SETUP
ENTER
ENTER
123
45 6
789
0
VOL
SEL
A/PS
MUTE STOP
MO/ST
MO/ST
POWER
POWER
CLK
PLAY/PAUSE
PLAY/PAUSE
EQ
BAND
BAND
VOL
OSD
OSD
TITLE/PBC
TITLE/PBC
LO/DX
LO/DX
GOTO +10
TOP INT
RDM
REPEAT
MODE
ZOOM
ZOOM
TA
AF

Remote Control
-11-
Button
Ref # Function
8
9
GOTO Press it button to begin playback at a moment in the program you
designate. Use number buttons to enter the data that is needed.
/
10 SEL
Press these buttons to skip ahead or back one track.
11 VOL+/- Use these controls to adjust the volume level.
12 ///
Press this button briefly to display the root level directory of a
Digital Video disc. Press and hold this button to turn on or off the
SUBWOOFER output.
Menu
SubWoofer
( )
13
14 BAND
(OSD)
In Radio mode, press this button repeatedly to switch between
the five radio bands: FM1 > FM2 > FM3 > AM1 > AM2.
In Disc Playback modes, Press this button to see information
about the disc currently in play.
POWER15 Press this button to turn the unit ON , press it again to turn the
unit OFF.
PLAY/
PAUSE
16 In Disc Playback mode, press to pause playback. Press again to
start where playback stopped.
MUTE
17 Press this button to turn off the audio. Press again to restore the
sound to its prior volume level.
TITLE/
PBC(A/P)
18
Display the TITLE menu that is stored in Digital Video disc
changing between PBC ON and PBC OFF on the VCD disc. In
Radio mode, press and hold this button to start the Auto-Program
mode, during which the tuner will scan for all strong stations and
assign them to the radio preset buttons.
Press this button to Open/Close the operate monitor .Long press
it to adjust the angle of monitor Upward/Downward
19
ZOOM
20 Shortly press it to increase the picture in size .
EQ
21 Press repeatedly to cycle through the different equalizer curve
presets you may wish to use for enhanced listening.
22 In Disc Playback mode, press for fast forward playback.
Press to navigate the various menus present in the product.
Briefly press this button repeatedly to switch between BASS,TRE, BAL,
FADER,COLOR,BRIGHT,CONTR,TINT and VOL; Long press this button
to switch REG, then briefly press this button repeatedly to switch between
PI, TA, AF, LOUD, SWF,EQ,DX/LOCAL(in radio mode),STEREO/MONO
(in radio mode),TIME 24H/12H, CLOCK, BUZZ,EUR/USA FREQ,ANIMA,
BG and LED; After switching a desired item above, press the VOL+ or
VOL- button to set.

Remote Control
-12-
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About 30 degree in each the direction of the front of the IR mark.
Preparing the Remote Control
1.First push to inside as the direction indicated by the arrow (See )And then
Remove the battery holder as the direction indicated by the arrow (See ).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See ).
3.Insert the battery holder. Push in the holder to the original position(See ).
1
2
3
4
Inserting the Battery
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a foil . Before initial use please remove this foil so that the remote
control is ready for operation .
Button
Ref # Function
0-9 25
+10
26
1-6
27 Six numbered preset buttons store and recall stations for each band
This button is used with the other number buttons for use with
two-digit number entries.
23 ENTER
This button is used to confirm selections and settings within many
of the menus in the OSD system.
24
Use to input numerical values during programming, with the GOTO
button, or to directly select a track to play .
In Radio mode, (when the RDS engaged,), 0 serves as TA function,
9 serves as the AF function .
In DISC mode, press it to reverse rapidly

-13-
Basic Operation
POWER ON/OFF
LOADING/EJECTING A DISC
Ejecting a Disc
In disc mode, Press the (2) button on
the front panel to eject the disc .
Loading a Disc
3. The player starts playback the disc
automatically .
2. Insert the disc with printed side facing
up into the disc slot (1) .
1 2
1. Press the POWER ( ) button on the
front pane to turn the device on .
Touch the “OFF” ICON on screen
to turn the unit off . Press the“ ”
onthe front panel to turn It on,
press it again to turn off .
OPEN/CLOSE MONITOR AND
ANGLE ADJUSTMENT
Touch OPEN button on front panel, the
monitor will draw out automatically .
OPEN/CLOSE button
FIG.1
When the monitor draws out to a certain
location, it will turn upward automa-
tically and stop at vertical position .
FIG.2
FIG.3
Do not rotate the monitor forcibly to
avoid mechanical damage .
FIG.4
Adjusting the viewing angle .
When the monitor does not move, you
press button on the panel to turn
the monitor upward or downward at
fine steps to get a desired viewing
angle .
Return the monitor to the central
viewing position, then press OPEN
button on the front panel , the monitor
will turn downward automatically .
FIG.5

-14-
Basic Operation
(3) (5)
(1) (2)
(6)(4)
(2). OFF (Power) button
in any modes, touch the “ OFF ” ICON
to switch the unit off .
(1). SET button
touch to enter the SETTING mode .
(5). Button
to adjust the angle of monitor down-
ward until your desired angle .
(6). Button
to adjust the angle of the monitor
upward until your desired angle .
(3). Button
Touch to close the monitor .
(4). Button
Touch to eject the disc form the
disc slot.
TFT Monitor Adjustment
In Radio mode, touch the“ RADIO ”
icon or In media mode , touch the
range to enter the home menu,
the message like following as below.
When the monitor turns downward to
a certain angle, it will draw in .
FIG.6
Touch the “SET” ICON on touch screen
to enter the setting mode, the message
will display like following :
Touch “SYSTEM” on the setting menu,
touch the “ / ” ICONS to select the
adjustment item, touch the “ / ”
ICONS to adjust the selectment item, it
depends on your habit to setup the data.
TINT: 0 to 32
Adjust the tint if the human skin color is
unnatural.
-Adjustable when “NTSC “ is selected for
“NTSC/PAL “ .
ADJUSTABLE ITEMS:
COLOR: 0 to 32
Adjust the color for the picture-lighter or
darker.
CONTRAST: 0 to 32
Adjust the contrast of the bright and dark
portion.
BRIGHT: 0 to 32
Adjust if the picture is too bright or
too dark.
BRIGHTNESS
CONTRAST
COLOR
15
ANIMATION
In RADIO mode, you can change the
playing time of animation among of
“OFF, 10S, 30S, 1M,1.5M, 2M, 3M and 4M ”.
Note:
Please set the playing time of the ani-
mation to “ 10S ” for the first, when you
turn the unit on .
Note: the RDS icon displays only when
setting EUR FREQ and power off the unit
and then power on again.

-15-
Basic Operation
SETTING WALLPAPER
in wallpaper mode, you can select the
among of “AUTO, GREEN, YELLOW, RED,
LIGHT BLUE, BLUE, PINK ” .
When you select the “AUTO” item, the
player will change the background
automatically .
AUDIO QUALITY ADJUSTMENT
In Radio mode, touch the screen of the
“ RADIO ” ICON to enter the home menu,
touch the “ SET ” ICON to enter the
Setting mode, the message will display
in the screen :
TREBLE
BASS
+06
Touch the “ SOUND ” section on the
setting menu, touch the “ / ” ICONS
to select the adjustment item, touch the
“ / ” ICONS to adjust the selectment
item , It depends on your habit to select
the Audio mode . Then touch the “SET”
icon to return to the previous playback .
ADJUSTABLE ITEMS:
TREBLE: -7to +7
Adjust treble level .
BASS: -7 to +7
Adjust bass level .
Hour adjustment: 0-23
ADJUSTABLE ITEMS:
Minutes adjustment: 0-59
Time format selectment : 24H/12H
In SETTING mode, touch the “TIME”
range to select the time mode .
SETTING TIME
Touch the “ TIME ” section on the setting
menu, touch the “ / ” ICONS to
select the adjustment item, touch the
“ / ” ICONS to adjust the selectment
item, then touch “ SET ” icon to confirm.
It`s depend on your need to setup
the data.
HOUR
MINUTE
24H/12H
11:36 AM
Note: the RDS icon displays only when
setting EUR FREQ and power off the unit
and then power on again. Note: the RDS icon displays only when
setting EUR FREQ and power off the unit
and then power on again.
SETTING LED LIGHT (3 COLORS)
In LED COLOR mode, you can select the
color among of “Auto, Blue, Red, Pink ” .
When you select the “AUTO” item, the
player will change the panel color
illumination automatically .
BALANCE: R 0-10 to L 0-10 .
Adjust sound balance between left
and right speakers .
FADE: F 0-10 to R 0-10
Adjust sound balance between front and
rear speakers .
SUB-WOOFER: ON or OFF
LOUDNESS: ON or OFF
RADIO LOC: LOC or DX
RADIO STEREO: STEREO or MONO
BUZZER: ON or OFF

-16-
Basic Operation
The RESET button is to be activated for
the following reasons:
A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
Reset Factory Settings
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
RESET
Rear View Camera
When connecting the rear view camera
the mirror image of the rear view is auto-
matically displayed on the monitor
when you change the gear to the back
position.
(Note: additional monitor can not display
the image.)
Setting Audio Mode
In any modes, touch the “EQ” range on
the touch screen (or press the EQ button
on remote control) to select one of
the preset sound modes: ROCK/POP/
JAZZ/CLASSIC/USER .
POP
USER
ROCK
CLASSIC
JAZZ
It depends on your habit to select the
Audio mode .
The information will display in the
monitor as follow :
EX.: In RADIO mode
EXTERNAL AUDIO SOURCE
On the front panel of the unit , there is an
AUX IN jack, to connect analogue replay
devices. Use this jack to replay sound of
other replay equipment such as
Digital Video players, computers, etc.
Via the loudspeakers.
1). Please f
connect the external device with stereo
jack plug the AUX IN socket .
2). Press the MOD button to select the
AUX IN connection.
3). Use the buttons on the external
device itself to operate it .
ollowing the diagram below,
AUX IN
Hea phon s port
de
AX IN
U
87.50
FM1
MHZ
DX
DX ST
USER
USER
1 2 388.50 90.00 98.00
65
4
80.50
80.50
103.00
103.00106.00

-17-
Control Panel
UNIT KEYS
2 3 4 5 6
7
9
1
11
10
8
12 13 14 15
17 16
18
MU/PTY
/CH1~6
MODE
OPEN
VOL-
VOL+
AUX IN
PUSH SEL
USB IN
TA/AF
IR BND
3. (POWER On/Off )/MODE
Press it to turn on the unit, to switch the device off.
In playback mode, Press it repeatedly to select RADIO, DISC, USB, CARD and
AUX IN mode.
Press and hold for two seconds
2. VOL & SEL
In normal mode, knob is used to increase or decrease the volume.
KNOB BUTTON
VOL
Briefly press SEL button repeatedly to switch between BASS,TRE,BAL,FADE,
COLOR,BRIGHT,CONTR, TINT and VOL; Long press SEL button to switch
REG, then briefly press SEL button repeatedly to switch between PI, TA, AF,
LOUD,SWF, EQ,DX/LOCAL(in radio mode),STEREO/MONO(in radio mode),
TIME 24H/12H, SET CLOCK, BUZZ,EUR/USA FREQ, ANIMA,BG and LED;
After switching a desired item above, rotate VOL knob to set.
1. OPEN or BUTTON
To slide the monitor out and stand it up or into the monitor slot, press this button;
To adjust the angle of the monitor, long press this button .

Control Panel
-18-
7. MU/PTY BUTTON
Press it button to switch of the loudspeakers for a short period. The word MUTE
flashes in the display. Press it again to cancel the mute function. This function
can also be cancelled by rotating the VOL multifunction button.
In Radio Mode, press this button and hold for a bout 2 seconds to select the PYT
of the grogram type (examples of such types of program are : NEWS, POP.....)
8 /CH 1-6 (RADIO PRESET) BUTTON
A) In Disc Playback Mode
Press this button to pause playback, press it again to resume playback.
B) In Radio Mode
Press this button repeatedly to preset station. With this system a total of 30
stations can be stored in the memory . Each band store up to six preset
stations. The stations might be FM1, FM2, FM3, AM1 (MW1) and AM2
(MW2) band.
6. BAND BUTTON
In Radio mode, press it repeatedly to select the desired radio band: FM1, FM2,
Fm3, AM1(MW1), AM2(MW2) .
4/10. |<< and >>| BUTTONS
In radio mode, Long pressing |<< or >>| button can automatically search down or up
for an available station beginning from the current frequency; Briefly pressing |<< or
>>| button can manually search down or up for a your desired station beginning from
the current frequency.
In media mode, pressing |<< or >>| button can play previous or next track; conti-
nuously and long pressing |<< or >>| button can fast backwards or forwards at the
following multiple of normal speed: x2, x4, x8, x20, x1.
5. TA/AF BUTTON
TA Function [traffic Announcement] Button(for Rds Only)
In RADIO mode
When you swing briefly the MU/PTY knob in the direction of the TA/AF button ,
the TA function is activated, the TA symbol appears in the display .
(swing it again to turn off . )
AF [Alternative Frequencies]
Swing and hold (more than 2’s) the MU/PTY knob in the TA/AF direction , the AF
function is activated. The AF symbol appears in the display . (swing and hold it
again to cancel this function .) The function about RDS to see page 23 .
Note: In Radio mode, press and hold the SEL knob for a long time to access the
selection menu: REG ON/REG OFF, PI MUTE/PI SOUND, AF ON/AF OFF .
Repeatedly pressing the SEL knob to select the item and by using the VOL+/- to
change .