Pyle PLVCP User manual

VIDEO CASSETTE PLAYER
MODEL NO.:PLVCP
OPERATINGINSTRUCTIONS
BEFORE OPERATING THIS UNIT, PLEASE THOROUGHLY READ THIS
MANUAL, AND RETAIN IT FOR FUTURE REFERENCE.

A
N
I
N
D
E
P
E
N
D
E
N
T
L
A
B
O
R
A
T
O
R
Y
•
T
E
S
T
I
N
G
F
O
R
P
U
B
L
I
C
S
A
F
E
T
Y
•
R
This instrument is listed by Underwriter’s
Laboratories, Inc. It is designed and manufactured to
meet rigid U.L. safety standards against X-radiation,
fire, casualty and electrical hazards.

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
DRAWING YOUR ATTENTION
Thank you purchasing this VCP, developed to provide advanced features and functions for high quality performance.
To obtain the best results and to avoid malfunction, PLEASE CAREFULLY READ THE DESCRIPTIONS AND OPERATING
PROCEDURE CONTAINED IN THIS OWNER’S MANUAL PRIOR TO OPERATING THIS VCP.
CAUTION : To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to prevent blade exposure.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
RISK OF ELECTRIC SHOCKS
DO NOT OPEN
CAUTION
AVERTISSEMENT : POUR PRÉVENIR LES RISQUES D’INCENDIE ET D’ÉLECTROCUTION, NE PEXPOSER CET APPAREIL À LA PLUIE
NI À L’HUMIDITÉ.
ATTENTION : POUR ÉVITER LES CHOCS ÉLECTRIQUES, NE PAS UTILISER CETTE FICHE (POLARISÉE) AVEC UN CORDON
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORITE DE COURANT, SAUF SI LES BROCHES
PEUVENT ÊTRE INSÉRÉES À FOND SANS QU’AUCUNE PARTIE NE RESTE À DECOUVERT.

Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
NOTE:
This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

1
RECOMMENDED GUIDELINES FOR THE USE OF A VIDEO MONITOR/TV IN A MOTOR VEHICLE
•A VIDEO MONITOR/TV is designed for rear passenger viewing only. This product may only be installed in the rear seat
compartment of the vehicle, out of the driver’s view.
•Installation in any other area of the vehicle, including anywhere within the driver’s view, is illegal in most states,
provinces and countries and may lead to driver distraction resulting in an accident, injury and/or death. If you are unsure
of regulations regarding this, please consult your local laws to determine how this applies to you.
•Users should be aware of the possible noise distraction caused by the use of the product and should carefully monitor
the volume so as not to interfere with the driver’s attention to surrounding traffic conditions.

2
TABLE OF CONTENTS
NOTE: This Video Cassette Player is compatible with any Video Cassette Player bearing the VHS mark. The VCP is
designed to expand your opportunities for home viewing and not for any usage which might violate the copyright laws.
Save the original shipping carton and packing materials; they will come in handy if you ever have to ship your VCP. For
maximum protection, repack the set as it was originally packed at the factory.
DRAWING YOUR ATTENTION
IMPORTANT SAFEGUARDS......................................................................................................................................................3
VIDEO HEAD CLEANING...........................................................................................................................................................7
IMPORTANT NOTES..................................................................................................................................................................8
FEATURES.................................................................................................................................................................................9
IDENTIFICATION......................................................................................................................................................................10
TO GET STARTED....................................................................................................................................................................18
BASIC OPERATION..................................................................................................................................................................20
SPECIAL OPERATION ..............................................................................................................................................................24
BEFORE CALLING SERVICE PERSONNEL................................................................................................................................26
SPECIFICATION.......................................................................................................................................................................29

3
IMPORTANT SAFEGUARDS
For your protection, please read these safety instructions completely before operating the appliance, and keep this
manual for future reference.
Carefully observe all warnings, precautions, and instructions on the appliance, or the ones described in the operating
instructions and adhere to them.
USE
Power Sources–This set should be operated
only from the type of power source indicated on
the marking label. If you are not sure of the type
of electrical power supply at your home, consult
your dealer or local power company. For those
sets designed to operate from battery power, or
other sources, refer to the operating instructions.
Overloading–Do not overload wall outlets,
extension cords or convenience receptacle
beyond their capacity, since this can result in fire
or electric shock.
Object and Liquid Entry–Never push objects of
any kind into the set through openings as they
may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the set.
Attachments–Do not use attachments not
recommended by the manufacturer, as they may
cause hazards.
Cleaning–Unplug the set from the wall outlet
before cleaning or polishing it. Do not use liquid
cleaners or aerosol cleaners. Use a cloth lightly
dampened with water for cleaning the exterior of
the set.
DC 12V?
UNPLUGUNPLUG

4
Water and Moisture–Do not use powerline
operated sets near water-for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool, etc.
Accessories–Do not place the set on an
unstable cart, stand, tripod, bracket, or table. The
set may fall, causing serious injury to a child or
an adult, and serious damage to the set. Use only
a cart stand, tripod, bracket, or table
recommended by the manufacturer.
Ventilation–The slots and openings in the
cabinet are provided for necessary ventilation. To
ensure reliable operation of the set, and to
protect it from overheating, these slots and
openings must never be blocked or covered.
– Never cover the slots and openings with a cloth
or other materials.
– Never block the slots and openings by placing
the set on a bed, sofa, rug or other similar
surface.
Portable Cart Warning–An appliance and cart
combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to
overturn.

5
–Never place the set in a confined space such as
a bookcase, or built-in cabinet unless proper
ventilation is provided.
Power-Cord Protection–Route the power cord
in order not to be walked on or pinched by items
placed upon or against them, paying particular
attention to the plugs, receptacles, and the point
where the cord exits from the appliance.
–Do not place the set over a radiator or heat
register, or where it is exposed to direct
sunlight.
In the normal temperature, if you pour a cold
liquid into a glass, water vapor in the air will
condense on the surface of the glass. This is
moisture condensation. The moisture
condensation may occur inside of VCPs, if used in
this condition, it will cause damage to the head
and the tape.
In case of moving the VCP from a cold place to
heated place,
Or the temperature of surroundings goes up due
to room heating switched on.
Or moving the VCP suddenly from air conditioned
room to a place of high temperature of humidity
in summer.
may cause the dew indicator to light up. Do not
use in this condition.
When the moisture condensation occurs inside of
the VCP, NEVER insert the cassette into the
cassette compartment. Remove the cassette, if
loaded, by pressing the STOP/EJECT key. Only
operate the VCP after the moisture condensation
has completely dried out. Normally, it takes
about 2 hours.
MOISTURE CONDENSATION
When does the
moisture
condensation occur
inside of the VCP?

6
SERVICE
Damage Requiring Service–Unplug the set
from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
–When the power cord or plug is damaged or
frayed.
–If liquid has been spilled or objects have fallen
into the set.
–If the set has been exposed to rain or water.
–If the set has been subjected to excessive shock
by being dropped, or the cabinet has been
damaged.
–If the set does not operate normally when
following the operating instructions, adjust only
those controls that are specified in the operating
instructions. Improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the set to normal operation.
–When the set exhibits a distinct change in
performance, this indicates a need for service.
Servicing–Do not attempt to service the set
yourself as opening or removing covers may
expose you to dangerous voltage or other
hazards.
Refer all servicing to qualified service personnel.
Replacement of parts–When replacement of
parts is required, be sure the service technician
has used replacement parts specified by the
manufacturer that have the same characteristics
as the original parts. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
Safety Check–Upon completion of any service
or repairs to the set, ask the service technician to
perform routine safety checks (as specified by the
manufacturer) to determine that the set is in safe
operating condition.
SERVICE DEPT
ALL SETS RECEIVE
OUR OK
SAFETY CHECK.
FRAYED OR CUT
DC LINE
CRACKED PLUG

7
VIDEO HEAD CLEANING
VIDEO HEAD CLOGGING
The video heads are the means by which the VCP reads pictures from the tape during playback.
In the unlikely event that they become dirty enough to be clogged, no picture will be playback. This can easily be
determined if, during playback of a known good tape, there is good sound, but the picture is extremely snowy. If this is the
case, have the video cassette player checked by qualified service personnel.
VIDEO HEAD CLEANING
During normal operation of the VCP, the video and audio heads can get dirty over a period of time, especially when using an
old or poor quality tape. When the heads are dirty the picture can get snowy and the tracking control will not adjust the
snow out of the picture. If this condition occurs, head cleaning cartridges may take care of this problem and restore normal
picture. We recommend that head cleaning cartridges be used sparingly due to the fact that they can be very abrasive to
the video heads. If the problem is not resolved with the head cleaning cartridge then the unit needs to be checked by a
qualified service personnel.
NOTE : Video heads may eventually wear out and should be replaced when they fail to reproduce clear pictures. To help prevent
video head clogging, use only good quality VHS tapes. Discard worn out tapes.

8
IMPORTANT NOTES
• Note that main voltage is supplied to the unit whenever the main plug is connected to the supply socket.
• To avoid the risk of fire or electric shock, do not expose the unit to rain or moisture.
• Do not attempt to open the cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Keep the unit away from radiators or other sources of heat.
• Do not operate or store the unit close to strong magnetic fields.
• Do not spill liquid of any kind onto the unit. If liquid is accidentally spilled onto the unit, immediately remove the main plug from the
supply socket, and consult a qualified service engineer.
• Avoid places subjected to strong vibration.
• Do not place anything heavy on the VCP.
• Use the video cassette player in a horizontal (flat) position only.
• Before operating, remove any paper wrapping which may have been affixed to the player during manufacturing.
DO NOT COVER VENTILATION OPENINGS ON TOP AND SIDES OF THE PLAYER DURING OPERATION.
• When a cassette is inserted into the loading compartment, the power is switched on automatically as long as the power cord is
plugged into a DC outlet. DO NOT force a cassette into the compartment when the power cord is unplugged.
• After playing a video cassette, remove it from the player. DO NOT move the player with a cassette in the compartment.
• Store video cassettes in their sleeves or cases and position vertically.
Model Number:
Serial Number:
Date Purchased:
Store’s Name and Address:
For your protection, record the model and serial numbers of your
video cassette player here. In the event your player requires servicing
or is stolen, you may need this information. You may also wish to clip
or staple your sales receipt to this page.

9
FEATURES
CONGRATULATIONS on your purchase of a new VHS VCP.
This VCP is an exciting, new VCP designed to satisfy all your VHS tape play and recording needs.
And, with proper use and care, your new VCP will offer many years of viewing enjoyment.
Just a few of the features include.
• DIGITAL AUTO TRACKING
This VCP plays clear pictures without special operations.
In the Auto tracking mode, the PLAY indicator lamp will blink.
• SELF PICTURE ADJUSTMENT
Since the HEAD DRUM rotates regularly depending on the voltage change or tape condition, the picture is always stable.
• AUTO START FUNCTION
This VCP will automatically power on and go into PLAY mode when a cassette is inserted.
• 2-HEAD Hi-Fi PLAYBACK

10
FRONT PANEL
IDENTIFICATION
! Cassette Compartment
@ Power key
When power is supplied to the set, the power indicator
lamp will always light up in red.
The Power ON and Power OFF mode will be toggled by
pressing this key.
When the POWER is switched on, the power lamp will
light up in red and the other keys will light up in green.
# Hi-Fi lamps
In the Hi-Fi output mode, the lamp will light up in green.
$ Stop/Eject key
Press this key to stop tape and once more to eject tape.
!
@
#$%^&
* (

11
IDENTIFICATION (continued)
% Rewind/Review key
If this key is pressed in the PLAYBACK mode, the VCP
enters the reverse picture search mode. If pressed in
STOP mode, then the tape will rewind at high speed.
The REW indicator lamp will light up in orange.
^ PLAY key
Press this key to playback a recorded tape, or to release
special operations such as the search modes.
In the playback mode the playback indicator lamp will be
light in orange, and in Auto Tracking mode, this indicator
lamp will blink.
& Fast Forward/ Cue key
If this key is pressed in the PLAYBACK mode, the VCP
enters the forward picture search mode. If pressed in
STOP mode, then the tape will fast forward at high
speed.
The FF indicator lamp will light up in orange.
* Cassette-In lamp
When the cassette is inserted, the CST-IN lamp will light
up in red.
( DEW lamp
This indicator will flash (if power is on) to indicate
excessive moisture has been inside of VCP. This unit will
not operate until it dries out sufficiently (the tape can be
ejected from the unit). When DEW mode has been
activated, leave the unit on to allow it to dry out
completely.

12
IDENTIFICATION (continued)
REAR PANEL
! FUSE HOLDER
This main line fuse is accessible with the external fuse
holder simply by unscrewing the cap. If the main line
fuse should blow then replace the fuse with a proper
rated fuse (125V, 2A).
@ RF OUT CHANNEL SELECTION SWITCH
Set to channel 3 or 4, whichever is not being
broadcasted in your area.
# ANT.IN
Connect the TV antenna to this terminal.

13
IDENTIFICATION (continued)
$ VIDEO OUT
Connect this terminal to VIDEO IN terminal of your television, using the RCA cord provided.
% AUDIO OUT L/R
Connect this terminal to AUDIO IN terminal of your television, using the RCA cord provided.
^ DIN JACK
& RF OUT
Connect this terminal to antenna terminal of your television on using the coaxial cable.
*( DC JACK IN
Connect this jack to DC source (DC 12V).
NOTE : This VCP is for 12V use only, so do not use it in 24V vehicles.
If you use this set in a 24V vehicle, all the indicator lamps will blink. To avoid the malfunction of this set, please
disconnect the plug from the power source.
1 PIN S.STATUS DATA OUT
2 PIN GND
3 PIN EXT.REMOTE DATA.IN
4 PIN GND
5 PIN GND LEFT RETURN
6 PIN GND RIGHT RETURN
7 PIN VIDEO OUT
8 PIN AUDIO LEFT
9 PIN AUDIO RIGHT

14
IDENTIFICATION (continued)
REMOTE CONTROL OPERATION RANGE
7m
1. Any object between the remote control and VCP will block the
path of beam when it is being used.
Dark walls, direct sunshine or very bright (incandescent) light
will reduce the remote control sensitivity.
2. Hold the remote control within an angle range of about 30º
from either side of the remote sensor center as shown.
3. When the remote control is vertical to the remote Sensor, it will
work within about 23feet (7m) from the VCP.
4. Point the front of the remote control directly at the front of the
VCP.
30o30o

15
IDENTIFICATION (continued)
BATTERY INSTALLATION
1. Remove the battery cover on the reverse side of the remote control.
2. Install 2 batteries (“AAA” size) into the remote control. (Carefully install batteries to match the polarity diagrams)
3. Close the battery cover.
• It is advisable to take batteries out of the remote control when it is not in use for a long time.

16
IDENTIFICATION (continued)
REMOTE CONTROL BASIC FUNCTIONS
POWER
RE-PLAY
TRACKING -/+
PLAYBACK
REWIND/REVIEW
STOP
PAUSE / STILL FRAME
RETRACKING
FAST FORWARD / CUE