Python 5706P User manual

Congratulations
Congratulations on the purchase of your state-of-the-art security and re-
mote start system. Reading this Owner’s Guide prior to using your sys-
tem will help maximize the use of your system and its many features.
Please visit: www.pythoncarsecurity.com – For general and additional
guide information. For any additional questions please contact your
authorized Directed dealer or contact Directed at 1-800-753-0600.
What you get
Welcome to the best generation of security with remote start. Your
system contains everything you need.
s Responder LC remote control with SST technology for superior
range and reliability
s 1-way Companion remote control
s AC adapter for charging your remote control
s Owner’s guide and Warranty card
Warranty
Card
Owner’s
Guide

Important information
Government Regulations and Safety information
Read the Government Regulations and Warning! Safety
First sections of this manual prior to operating this system.
Warning! Failure to heed this information can result in
death, personal injury or property damage and may also
result in the illegal use of the system beyond its intended
purpose.
Your Warranty
Your Responder LC system comes with a warranty. Please make sure
you receive the warranty registration card and proof of purchase from
your dealer indicating the product was installed by an authorized
Directed dealer. Please validate it online at www.prodregister.com/
directed or complete and return the warranty registration card.
Replacement remote controls
If additional remote controls are desired, please see your authorized
dealer or visit us at www.directedstore.com to order. Part numbers
are: 7754P for Responder LC 2-way remote control and 7654P for
the companion remote control. Your system can also be used with
optional Responder HD color 2-way remote control (7941P).

Contents
Getting Started.................................................................................................... 4
Charging the remote control:................................................................. 4
Keys to using this manual...................................................................... 5
Responder LC 2-Way........................................................................................... 6
Status Screen Icons.............................................................................................. 8
Using your System............................................................................................. 11
Commands and Confirmations ............................................................ 11
Performing Commands ....................................................................... 11
Responder LC Command table ............................................................ 12
Fault Condition Alerts......................................................................... 12
Basic Commands (Direct Access) ........................................................................ 14
Arm ................................................................................................. 14
Disarm ............................................................................................. 14
AUX/Trunk........................................................................................ 15
Remote Start...................................................................................... 15
Advanced Commands: (Level 1) ......................................................................... 16
Silent Arm......................................................................................... 16
AUX 1.............................................................................................. 16
Runtime Reset .................................................................................... 17
Temp Request .................................................................................... 17
Advanced Commands: (Level 2) ......................................................................... 18
Sensor Bypass ................................................................................... 18
Remote Valet .................................................................................... 18
AUX 2.............................................................................................. 18
Timer Start* ...................................................................................... 19
Runtime Remaining ............................................................................ 19
Advanced Commands: (Level 3) ......................................................................... 20
Sensor Silent Arm* ............................................................................ 20
AUX 3.............................................................................................. 20
Smart Start**.................................................................................... 21
Alarm Report*................................................................................... 21
Advanced Commands: (Level 4) ......................................................................... 22
Full Silent Arm* ................................................................................. 22
AUX 4.............................................................................................. 22
Defogger** ...................................................................................... 22
Responder LC Configuration............................................................................... 23
Navigating menus and options............................................................ 23
Button operation ................................................................................ 23
Access menu items ............................................................................ 23

Main Menu....................................................................................................... 24
Setup Remote menu:........................................................................... 24
Remote Start Info ............................................................................... 25
Runtime Alert..................................................................................... 26
Car 2............................................................................................... 26
Screen Color..................................................................................... 26
Temp Unit ......................................................................................... 26
Button Beep....................................................................................... 27
System Type ...................................................................................... 27
Clock Set .......................................................................................... 27
Review ............................................................................................. 27
Exit .................................................................................................. 27
Sensor Adjust: ................................................................................... 27
Pair Remote:...................................................................................... 28
Demo mode: ..................................................................................... 29
Power Off:........................................................................................ 29
Exit: ................................................................................................. 29
Alarm Features ................................................................................................. 30
Normal Arm Protection....................................................................... 30
Sensor Silent Arm protection ............................................................... 30
Full Silent Arm Protection .................................................................... 31
Sensor Warn-away Messages ............................................................. 31
Full Trigger Messages......................................................................... 31
Emergency Override .......................................................................... 31
Trigger Zone Fault Report.................................................................... 32
Alarm Report when disarming ............................................................. 32
Alarm Report when requested ............................................................. 33
Nuisance Prevention (NPC)................................................................. 33
Remote Start Features ........................................................................................ 34
Pit Stop Mode ................................................................................... 34
Key Takeover..................................................................................... 34
Remote Start Safe-lock........................................................................ 35
Disabling Remote Start ....................................................................... 35
Advanced Start ................................................................................. 35
Temperature Reporting........................................................................ 36
Remote Start Time-out Alert.................................................................. 37
Manual Transmission Start (MTS mode) ................................................ 37
Turbo Timer Mode.............................................................................. 38
Remote Start Error.............................................................................. 39

Remote and System Operations.......................................................................... 40
Passive Arming*................................................................................ 40
Auto Re-arming*................................................................................ 40
Valet Mode ....................................................................................... 41
Power Save....................................................................................... 41
Rapid Resume ................................................................................... 41
Automatic Remote Updates ................................................................. 41
Out of Range .................................................................................... 42
No Remote Output............................................................................. 42
Feature not Available ......................................................................... 42
1-way Companion Remote Control..................................................................... 43
Accessing Commands ........................................................................ 44
Button Auto Lock................................................................................ 44
Car Select......................................................................................... 44
Programming .................................................................................... 45
System Expansion Options................................................................................. 46
Battery Information (Responder LC)..................................................................... 48
Low Battery....................................................................................... 48
Battery Life........................................................................................ 49
Battery Information (1-Way) ................................................................ 50
Low Battery Alerts .............................................................................. 50
Battery Disposal ................................................................................ 50
Glossary of Terms.............................................................................................. 51
Patent Information ............................................................................................. 52
Government Regulations .................................................................................... 53
Warning! Safety First......................................................................................... 55
Installation ........................................................................................ 55
Remote Start Capable ........................................................................ 55
Manual Transmission Vehicles ............................................................. 55
Interference....................................................................................... 57
Upgrades and Batteries ...................................................................... 57
Water/Heat Resistance ...................................................................... 57
Limited lifetime consumer warranty ..................................................................... 58

4© 2012 Directed. All rights reserved.
Getting Started
Your Responder LC remote is powered by an internal rechargeable
battery that can only be serviced by an authorized Directed dealer.
Due to transit and storage time prior to your purchase, the battery
charge may have depleted. To ensure proper operation, check the
battery level and connect the battery charger if not fully charged.
See “Battery Information (Responder LC)” on page 48 and “Status
Screen Icons” on page 8 for more information about the battery.
Charging the remote control:
1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB
connector into the mini-USB port located on the side of the
remote control (see diagram under Responder LC 2-way). The
text field will display CHARGE to indicate the remote control is
charging (The remote remains operational while charging and
can command the system).
2. Once fully charged the text field will display FULL .
3. The remote control is then ready for use. Disconnect the mini-
USB end from the remote control first and then the AC adapter
from the AC outlet.
Note If the battery is excessively depleted when the charger is
connected, functionality may be delayed while it charges to
the minimum voltage required to operate the display, after
which normal charging resumes.

5
© 2012 Directed. All rights reserved.
At a Glance
5
Keys to using this manual
Specific actions (in bold type) and style conventions are used consis-
tently throughout this manual, they are as follows:
s Press: implies pushing in and releasing a button.
s Hold: is used after Press actions when a button needs to be held
in position for an extended period of time, typically several sec-
onds.
s ARMED this style denotes the text which appears in the text field
portion of the Display during operations described in the manual.
If the text string is too long for the text field, it then plays and loops
sequentially word by word.
s Italicized words denote section/sub headings in this guide and
can be located through the table of contents.
s An asterisk (*) when used after a word or phrase denotes that
additional details can be found in related sections usually noted
at the bottom of the page or end of the section.

6© 2012 Directed. All rights reserved. 6
Responder LC 2-Way
Internal
Antenna
Display
Command
Buttons
Function Button
Mini USB Port
Feature Description
Internal Antenna Used for transmitting and receiving information
Display Status screen - the upper portion of the display contains status
icons for the System, Siren, Alarm zones, Remote Start and
Remote Control.
Text field - the lower portion of display - shows the Clock,
Runtime or Temperature during Remote Start, as well as
Command confirmations, Page messages and programming
menus
Command buttons (4) Used to perform arming, disarming, auxiliary channel and
remote start commands
Function button Used to access function levels for commands, configura-
tion menus for programming, Car Selection, and to request
reports.
Mini-USB Port The battery charger plugs into this port.

7
© 2012 Directed. All rights reserved.
At a Glance
7
Control Center
Status LED Control button
The Control Center, typically located on the upper part of the front
windshield sends and receives commands or messages to and from
your system. It consists of:
s The In-vehicle system antenna, for 2 way communication.
s The Status LED, as a visual indicator of the system’s status.
s The Control button, for placing the system into Valet Mode* and
to perform the Emergency Override** operation.
* See “Remote and System Operations” on page 40 for details.
** See “Alarm Features” on page 30 for details.

8© 2012 Directed. All rights reserved.
Status Screen Icons
1
ALL
Text Field
Status Screen
Icons
The table below describes all the status screen icons.
Icon Description
System Status
Armed: The system is Armed, the alarm is enabled.
Locked: The system is Locked in Valet, the alarm is disabled.
Disarmed: The system is Disarmed, the alarm is disabled.
Unlocked: The system is Unlocked in Valet, the alarm is dis-
abled.
Siren Status
Siren is disabled for sensor triggers; remote is paged for all trig-
gers (Sensor Silent Arm).
+ ALL Siren is disabled for all triggers; remote is paged for all triggers
(Full Silent Arm).
Remote Start
Remote start is active, the engine is running.
Timer Start is On; Remote Start is On.
Note: When the icon is without an arrow head: Timer Start is
enabled: Remote Start is Off

9
© 2012 Directed. All rights reserved.
At a Glance
9
Icon Description
Remote Start
+
Smart Start is On; Remote Start is On.
Note: When the icon is without an arrow head: Smart Start is
On; Remote Start is Off.
Manual Transmission Start mode is enabled, the engine can
be started
Displays the vehicle interior temperature
On during Remote Start after performing the Defogger On
command
Zone Status
On during Warn-away and Full Trigger message output
On during Trunk Zone Full Trigger output and Aux/Trunk
channel activation
On during Fault Report to indicate the Trunk is open and
bypassed when arming
On during a Sensor Zone Full Trigger output
On during Fault Report to indicate a Sensor is active and
bypassed when arming
On during the Door Zone Full Trigger output
On during Fault Report to indicate a Door is open and
bypassed when arming
On during a Hood Zone Full Trigger output
On during Fault Report to indicate the Hood is open and
bypassed when arming
On when remote is set to command the system programmed
as Car 1*
On when remote is set to command the system programmed
as Car 2*

10 © 2012 Directed. All rights reserved. 10
Icon Description
Remote Control Status
Bars indicate battery level is Full, ¾,½,¼ or Empty
On while the remote control is transmitting a command
On while the remote control is receiving a message
On with Out of Range fault tone to indicate the remote failed to
receive a command confirmation
Pager on: The remote will wake up to listen for messages
Pager off: The remote will not wake up to listen for messages
The remote will Vibrate when messages are received
The remote will emit Beeps and Tones when messages are
received
Text field Displays the Clock, Runtime, Temperature, message text and
feature menus
On after the Garage Open** message has been received.
On after the Garage Closed** message has been received.
* This icon not present until the Car 2 is turned on in the Setup Re-
mote configuration menu.
** This icon not present until the remote is paired with an optional
garage door opener.

11
© 2012 Directed. All rights reserved.
Commands
11
Using your System
Commands and Confirmations
Commands, Basic or Advanced, are used to activate system features
and are performed by pressing one of the Command buttons. Basic
commands control the most often used security and remote start fea-
tures while Advanced commands control more specialized features
and request reports.
Confirmations for Basic or Advanced commands are indicated
first by siren chirps and parking light flashes, and then by Text, Icons
and beeps or tones on the remote control. A description of each
feature confirmation is found in the following Basic command and
Advanced command sections.
Performing Commands
Perform Basic commands by pressing one of the command buttons
while in the Direct Access level. Direct access is available while the
text field displays the Clock, Temperature or Runtime. Perform Ad-
vanced commands by first accessing one of the Function Levels and
then pressing one of the command buttons while within a level. Func-
tion Levels are available when the text field displays LEVEL 1,2,3 or
4.
Advanced command example: Silent Arm
1. Press the button once to access Function Level 1, the text
field will display LEVEL 1 .
2. Press the button while LEVEL 1 text is still on to perform the
Silent Arm command.
3. The Responder LC remote will display SILENT ARMED in the
text field and update the status screen icons.

12 © 2012 Directed. All rights reserved. 12
Responder LC Command table
Button
Level Direct Access x 1
LEVEL 1
x 2
LEVEL 2
x 3
LEVEL 3
x 4
LEVEL 4
Arm/Lock
(Panic)
Silent Arm Sensor
Bypass
Sensor Silent
Arm
Full Silent
Arm
Disarm/Unlock Silent Disarm Remote Valet Car Finder
Remote Start Runtime
Reset
Timer Start Smart Start Defogger
A U XAux/Trunk AUX 1 AUX 2 AUX 3 AUX 4
Advance Level
Change Car
(3s), Enter
programming
(8s)
Temperature
Check
Runtime
Remaining
Alarm
Report
Fault Condition Alerts
If, when performing a command, a condition exists that does not
allow activation of an Alarm feature* or Remote Start feature**,
the NOT AVAILABLE or REMOTE START ERROR text and a fault tone will
play.
* Alarm feature not available when the system status is incorrect
upon receiving the command. (Example: Sensor bypass com-
mand is received when disarmed).
Refer to the notes included in the following command descriptions
that address these faults or go to “Feature not Available” on page
42 for more details.

13
© 2012 Directed. All rights reserved.
Commands
13
** Remote Start feature not available when the Remote Start status is
incorrect upon receiving the command. (Example: Runtime reset
command received when remote start is off)
Refer to the notes included in the command descriptions that ad-
dress these faults or go to “Remote Start Error” on page 39
for more details.

14 © 2012 Directed. All rights reserved. 14
Basic Commands (Direct Access)
Arm
Press and release
The alarm arms, doors lock (if connected), and the siren
chirps and parking lights flash once. The ARMED text and beeps play
to confirm and the System Status Icons update. If Valet mode* is On,
the doors lock and the VALET text and tone play. Exit Valet mode to
arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the parking lights. The PANIC text and
siren tones play to confirm. Press the or button to stop
the output.
Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the siren chirps
and parking lights flash twice. The DISARM text and beeps play to
confirm and the system status icons update. If Valet mode* is On, the
doors unlock and the VALET text and tone play.
More than 2 siren chirps and remote beeps indicate a trigger has oc-
curred. The DISARM text is replaced by the Alarm report.**
6:30

15
© 2012 Directed. All rights reserved.
Commands
15
AUX/Trunk
Press and hold AUX
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The TRUNK text and tones play to confirm.
Remote Start
Press and release
Activates (or if On, deactivates) the remote starter. The engine and
parking lights turn On and the REMOTE START ON text and tones play,
or the engine and parking lights turn Off and the REMOTE START OFF
text and tones play to confirm, the Remote Start status icons update.
The icon will display in the status screen and the text field will
display the Runtime, Temperature or Clock as programmed. If Remote
Start fails to activate, REMOTE START ERROR text and a fault tone play
while the parking lights flash to identify the reason.***
* See “Remote and System Operations” on page 40 for details.
** See “Alarm Features” on page 30 for details.
*** See “Remote Start Error” on page 39 for details.
For Manual transmission vehicles see “Manual Transmission Start (MTS
mode)” on page 37 for more details.

16 © 2012 Directed. All rights reserved. 16
Advanced Commands: (Level 1)
Press and release the button 1 time.
Silent Arm
Press and release
The alarm arms, doors lock (if connected), and the parking lights flash
once. The SILENT ARMED text plays to confirm and the System Status
icons update. Valet mode* or Trigger Zone Fault report** messages
may be received.
Silent Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the parking lights
flash twice. The SILENT DISARM text plays to confirm and the System
Status icons update. The Alarm report** may replace the Silent Dis-
arm text.
AUX 1
Press and release AUX
Activates (or if On, deactivates) the Aux 1 output. The AUX CHANNEL
text and On tones or Off tones play to confirm.
level 1

17
© 2012 Directed. All rights reserved.
Commands
17
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset
will reset the runtime counter to the pre-programmed setting. The
RUNTIME text and tones play to confirm. The text field will update
if set to display runtime.
Note Remote Start must be On to use this feature.
Temp Request
Press and hold the button
Requests the vehicle’s interior temperature and temporarily displays it
via status screen icon and text field.
* See “Remote and System Operations” on page 40 for details.
** See “Alarm Features” on page 30 for details.