Cycle the Ignition Key
ON/OFF ON/OFF ON
(Leaving the key ON)
Press and release the
Program Switch 1 time.
Siren will chip to confirm
program mode entered
Press Lock Button on
Remote to Select Menu 1
1 CHIRP
SETS OPTION 1 – AUTO-LOCK & UNLOCK ENABLED- The doors will
lock when the key is turned on and unlock the when the key is turned off.
SETS OPTION 2 – AUTO LOCK ONLY ENABLED- The doors will lock
when the key is turned on but will not unlock when te key is turned off.
SETS OPTION 3 – AUTO LOCK DISABLED- The doors will not lock or
unlock when the key is turned on or off.
SETS OPTION 1 – SIREN DISABLED- The siren and will activate with
Panic and Car Finder Mode only.
SETS OPTION 2 – SIREN CHIRPS ONLY- The siren will chirp for all
functions. When the alarm is activated, the siren output will activate.
* SETS OPTION 3 – SIREN OUTPUT- The siren and output will activate
for all functions.
CHANGE SETTING 1 -
GOTO SETTING 2 - PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
CHANGE SETTING 2 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 3 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
1 CHIRP
2 CHIRP
2 CHIRP
3 CHIRP
3 CHIRP
DEFAULT SETTING
DEFAULT SETTING
STEP 2 - SELECT / CHANGE PROGRAM SETTINGS
SETS OPTION 1 – DOUBLE UNLOCK & SINGLE UNLOCK- The system
will provide 2 unlock pulses w/unlock and 1 lock pulse w/lock.
SETS OPTION 2 - DOUBLE LOCK & SINGLE UNLOCK- The system will
provide 2 lock pulses w/lock button and 2 unlock pulses w/unlock button.
SETS OPTION 3 – NORMAL OUTPUT- Single output for both the lock and
unlock outputs.
CHANGE SETTING 3 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 3 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
STEP 1 - ENTER PROGRAM MODE MENU 1
SETTING 1- IGNITION LOCKS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
PRESS
1 TIME
X1
1 CHIRP
SETTING 2-SIREN CHIRPS
THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
PRESS
2 TIMES
X2
2 CHIRP
SETTING 3-DOOR LOCK OPTIONS
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
PRESS
3 TIMES
X3
3 CHIRP
DEFAULT SETTING
SETS OPTION 1 – DISABLED- Shock sensor will be disabled at all times.
SETS OPTION 1 - PASSIVE LOCK DISABLED- The doors will not lock when Passive Arming
sets the alarm.
SETS OPTION 1 – PASSIVE ARMING ENABLED- The alarm will automatically arm 30
seconds after the last door is closed.
SETS OPTION 2 – PASSIVE LOCK ENABLED- The doors will lock when Passive Arming
set the alarm.
SETS OPTION 2 – PASSIVE REARM- The alarm will automatically arm 30 seconds after
unlock is pressed..
SETS OPTION 3 – PASSIVE ARMING DISABLED- The alarm will not automatically. Must be
armed by the remote.
1 CHIRP
1 CHIRP
1 CHIRP
2 CHIRP
2 CHIRP
2 CHIRP
3 CHIRP
DEFAULT SETTING
DEFAULT SETTING
DEFAULT SETTING
SETS OPTION 1 - SHORT PULSES- The output for lock and unlock is .25sec.
This helps prevent the windows from rolling up/down on some vehicles..
SETS OPTION 2 – LONG PULSES- The output for lock and unlock is 3 seconds.
Used for vacuum door lock systems.
SETS OPTION 3 – NORMAL PULSES- The output for lock and unlock is .75sec.
Used for most vehicles
1 CHIRP
2 CHIRP
3 CHIRP
DEFAULT SETTING
SETTING 4- LOCKS TIMING
THE SIREN WILL CHIRP 4 TIMES WHEN SETTING 4 IS SELECTED
PRESS
4 TIMES
X4
4 CHIRPS
CHANGE SETTING 4 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 5 - PRESS & RELEASE THE VALET SWITCH
CHANGE SETTING 5 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 6 - PRESS & RELEASE THE VALET SWITCH
CHANGE SETTING 6 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 7 - PRESS & RELEASE THE VALET SWITCH
CHANGE SETTING 7 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GO BACK TO SETTING 1 - PRESS & RELEASE THE VALET SWITCH
SETTING 5- SHOCK SENSOR
THE SIREN WILL CHIRP 5 TIMES WHEN SETTING 5 IS SELECTED
SETTING 6- PASSIVE ARMING
THE SIREN WILL CHIRP 6 TIMES WHEN SETTING 6 IS SELECTED
SETTING 7- PASSIVE LOCKS
THE SIREN WILL CHIRP 7 TIMES WHEN SETTING 7 IS SELECTED
PRESS
5 TIMES
X5
5 CHIRPS
PRESS
6 TIMES
X6
6 CHIRPS
SETS OPTION 2 – ENABLED- Shock sensor is enabled.(ON)
PRESS
7 TIMES
X7
7 CHIRPS
SYSTEM PROGRAMMING - Menu 1
PAGE 10
450 SERIES
INSTALL MANUAL
PROGRAMMING
SYSTEM PROGRAMMING - Menu 1
PAGE 11
450 SERIES
INSTALL MANUAL
PROGRAMMING
