12 3 4 5 6 7 8
Q-AV Table Stand - Installation Instructions
F- M4 x 25mm
G- M5 x 30mm
H- M6 x 50mm
B- M6 x 16mm
D- M5 x 10mm
E- M8 x 20mm
X- M6 x 20mm
C- FOOT
A- M8 x 45mm
L- M6 x 20mm
M- M8 x 20mm
I- M6 x 30mm
J- M8 x 50mm
K- M8 x 30mm
N - M4
O- M5 x4
V- M8 x 4mm
W- M8 x 12.5mm
x4
x4
x8
R- M8 x 6.5mm
S- M6 x 6.5mm
x4
x2
x4
x16
x8
x8
x2
x4
P- M6
Q- M8
T- M5 x 6.5mm
U- M4 x 6.5mm
Attach U-Section To Base
Attach Rubber Feet To Base
And Attach U-Section To Base
Attach LCR Hanger Brackets
To TV Mounting Plate Fixings
Attach TV Mounting Plates
To U-Section
Attach TV Mounting Plate
Fixings To U-Section Attach TV Mounting PlateAttach LCR Hanger Brackets
To TV Mounting Plate Fixings Hang Speaker Assembly
On LCR Hanger Brackets Attach Screen Fixing
Uprights To Screen Hang Screen on Bracket
Plate Fine Adjust Speaker Position
Fixing Kit 1 (Small Kit)
Fixing Kit 2 (Large Kit)
1
3
2
Bx4
Bx4
Ax4
Cx8
Dx8
QUICK GUIDE
?READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING YOUR EQUIPMENT.
?THESE INSTRUCTIONS SHOULD BE USED IN CONJUNCTION WITH THE Q-AV LCR50 USER MANUAL.
?PLACE THE TABLE STAND IN A SUITABLE LOCATION MAKING SURE THE SURFACE IS HORIZONTAL AND FLAT.
?DO NOT ATTEMPT TO ALTER OR MODIFY ANY PART OF THE TABLE STAND OR IT'S ATTACHMENTS.
?DO NOT USE IF ANY PARTS ARE BROKEN OR APPEAR TO BE DAMAGED.
?TIGHTEN ALL BOLTS AND FIXINGS SECURELY. ONLY USE FIXINGS PROVIDED WITH THIS STAND.
?DO NOT MOUNT YOUR TV NEAR TO SOURCES OF HEAT OR MOISTURE.
?ALWAYS HAVE A MINIMUM OF TWO PERSONS TO INSTALL THE TV.
?DO NOT ATTEMPT TO LIFT OR RELOCATE THE STAND WHILST THE TV IS ATTACHED
NOTE:
Choose holes from 5 possible
fixing positions depending on
dimensions and fixing
positions on the screen. You
may need to change position
of these fixings once you have
determined your screen's
mounted position.
x2
