Qazqa Charlotte 104418 User manual

+
-
Daylight Sensor
Radar
Motion Sensor
Charlotte WL 1 Black Solar
104418
Installation
1. Drill 2 holes on the wall according to the size of the plugs and then hammer the 2 plugs into the wall
&.put the screws in.
2. Fix the luminaire on the screws.
Cautions
1. Please install this solar LED Lamp at the places exposed to the sunlight directly, no shelter.
2. If the LED light start to continuously flashing, it indicates that the unit is low on power and need to be recharged.
3. Please do not change anything of solar panel or battery.
4. Please understand that the working time will be effected when sunshine is not enough(Rainly, Cloudy).
123

Charlotte Black Solar
104418
Optional Functions & Features
1.Future - Proof Design, The solar panel + LED Module is replaceable after working lifetime.
No need to replace the whole luminaire, save cost.
2.Security Lighting Option: After 30 seconds without human movement detected, the light
will be turned down to 20% brightness automatically(Default setting)
3.Complete Off Option: After 30 seconds without human movement detected, it will be
turned off automatically(This option need to press the switch button one time, then it will be
switched to this option.
4.Turn off: At night, press the switch button 3 seconds to turn off the light.
+
-
Daylight Sensor
Radar
Motion Sensor
-Instruction for Solar panel+LED Module
replacement
-Mode Selection