Qdos Crystal User manual

USER GUIDE
Crystal® Designer Baby Gate - Hardware Mount
Height
30.7" (78 cm)
Outside Opening
Min 26.4" (67 cm)
Max 36.6" (93 cm)
Inside Opening
Min 29.5" (75 cm)
Max 40.5" (103 cm)*
IMPORTANT: Qdos wants to keep your children safe
and for that we need you to do your part by carefully
reading and following the instructions below. Please read
through the instructions before starting the installation.
For installation videos and FAQ go to: QdosSafety.com
*Using included spacers

2
IMPORTANT!
PLEASE READ AND FOLLOW THESE INSTRUCTIONS
CAREFULLY AND KEEP FOR FUTURE REFERENCE
When installed between two strong and rigid surfaces
and according to these instructions, this gate has been
tested to meet or exceed the following Safety Standards,
US- ASTM F-1004, Canada- SOR/90-39, and European-
EN 1930.
WARNING
• Children have died or been seriously injured
when gates are not securely installed.
• ALWAYS install and use gates as directed using all
required parts.
• Intended for use with children from 6 months up
to 24 months of age.
• STOP using when a child can climb over or
dislodge the gate.
• NEVER use to keep child away from pool.
• Use only with the locking mechanism securely
engaged.
• Regularly check all hardware and do not use if any
part of gate is broken or missing.
• This product will not necessarily prevent all
accidents. NEVER leave child unattended.
• NEVER step or climb over the gate, always open
to pass through.
• For indoor use only.
• Fits inside openings 29.5-40.5" (75-103 cm).
• The miniumum distance to the first step of the
stairs is 1” (2.5 cm) when used at the top of stairs.
• Never leave the gate unlocked/open as older
children may play with the gate and get injured or
damage the gate.
!

3
HELP?
To help you install your gate quickly and easily, please go to
qdossafety.com for installation videos and FAQs. You may
also contact our customer service at
[email protected].com or by phone at 800-593-5522.
MAINTENANCE AND CLEANING
Check the gate regularly to ensure all the hardware and
mountings are tightened. Clean using a mild soap and
wipe with a damp cloth.
WARRANTY
Your Qdos product is warrantied to be free from
manufacturing defects in material or workmanship for
a period of 1 year from date of purchase, when used
under normal conditions and in compliance with these
instructions. Qdos will either repair, or at its own option
replace, free of charge, any parts necessary to correct
any defect in material or workmanship during the
warranty period.
USE LOCATIONS
This gate can be used at the top of or at the bottom
of stairs, as well as inside and in front of doorways and
openings when installed on two strong and rigid surfaces.
If using at the top of stairs install gate a minimum of 1”
(2.5 cm) from the top step!
top of stairs bottom of stairs Inside or In front of
Opening/doorway

4
OPENING SIZE AND ANGLE MOUNTING
The Crystal® will fit inside openings from 29.5-40.5" (75-
103 cm)* and in front of openings 26.4-36.6" (67-93 cm).
The size of the gate is adjustable by sliding the two gate
panels, adjustments in handle and hinges.
*With addition of included Baseboard Spacers.
Besides the normal perpendicular mounting, the Crystal
gate can be mounted at any angle within 180 degrees.
This allows the gate to be mounted inside the opening,
in between odd
angled locations,
as well as in front
of openings. If
installed in front
of an opening
the gate will fit
openings up to
approximately
36.6" if mounting
surface is flat.
Minimum Maximum

5
BASEBOARD AND QUARTER ROUND
INSTALLATION
General - This gate may be installed at the top and
bottom of stairs, in openings and doorways, that are
strong and rigid with a flat and clean mounting surface.
Included Installation Tools
If mounting over baseboard and the
baseboard height is 4.25” or less, you can
use the included Baseboard Spacers for
a vertical installation of the Hinge and
Locking FastMount® Rails. See page 12.
If there is a quarter round present,
remove the quarter round insert at
the bottom of the FastMount® Rail as
described in Step 1 before installation.
Additional Qdos Installation
Accessories - For challenging installation
situations and surfaces, one or more of
the following Qdos Baby Gate Accessories
might be necessary for a secure
installation.
Qdos Universal Baseboard Kit -
If the baseboard is more than 4.25” tall you
will need to use the Qdos Baseboard Kit in
order to create a vertical mounting surface.
Works for baseboards up to 7/8” (22 mm)
thick and up to 7” (18 cm) tall.
Qdos Universal Stair Mounting Kit –
If installing on stair banisters or in between
spindles, use Qdos Universal Stair Mounting
Kit that wraps around square banister posts
up to 4” in diameter and round banisters up
to 5” in circumference, as well as between
stair spindles. No screws required so no
damage to your staircase.

6
PARTS LIST:
Top Hinge
Bottom Lock
2x One-Way Stop
(Right and Left side)
Top Lock
Bottom Hinge
A/B FastMount®
LOCKING Rail
(One screw hole)
C/D FastMount®
HINGE Rail
(Two screw holes)
A
A
C
C
BB
D
D
Extra Long Barrel Nut
for One-Way Stop

7
2x Top Baseboard
Spacers
2x Bottom
Baseboard Spacers
2x Allen
Wrenches
Installation Level
with Marking Tool
Gate Removal
Tool
Gate Panels,
pre-assembled
SecureTrack®
3x Short 2"
(50 mm) Screws
1x Shorter screw
3x Long 3.25"
(85 mm) Screws
1x Shorter screw
3x Medium 2.75"
(70 mm) Screws
1x Shorter screw

8
Step 1
Identify the rail with only
one hole in it. With the hole
towards the bottom, push the
Top Lock into the top of the
FastMount® Locking Rail (A/B)
until the plastic tab snaps into
place on the back of the rail
(A). Push the Bottom Lock
into the bottom of the Locking Rail until the plastic tab
snaps into place on the back of the rail (B).
IMPORTANT:
If you are mounting on a wall with
quarter round molding on the floor,
while pushing in the locking tab on
the back, pull out the Quarter Round
Spacer from the bottom of the Bottom
Lock.
If you are mounting on a wall that has a
baseboard, please see Page 14 on how
to use the included Baseboard Spacers.
Step 2
Repeat Step 1 for the
Top (C) and Bottom
Hinge (D) pieces on
the FastMount®
Hinge Rail (C/D).
C D
A B

9
IMPORTANT:
REGARDING THE INCLUDED MOUNTING SCREWS!
Before marking where to attach the gate, make sure you
have a solid surface for mounting the gate to. *If using at
top of stairs install gate a minimum 1”(2.5 cm) from top
step!
The included screws are intended for the following
locations:
Directly into wood
The Short 2" (50 mm) Screws are used when mounting
directly onto wood, for example in a door frame or other
framed opening. The shorter screw in the pack is used
for the top of the FastMount® Locking Rail (A). When
installing into hardwood, first drill a 3/32" (2 mm) pilot
hole.
Into a stud behind drywall
Use a stud-finder to locate where there is a stud behind
the drywall. Then use the Medium 2.75" (70 mm) Screws
to mount the gate into the stud. The shorter screw in the
pack is used for the top of the FastMount® Locking Rail
(A).
Using Baseboard Spacers
If attaching the gate using Baseboard Spacers, see page
14, use the Long 3.25" (85 mm) Screws to secure into the
stud. The shorter screw included in pack is used for the
top of the FastMount® Locking Rail (A).
Any other surface
If mounting into drywall, brick or other surface, use
only the appropriate hardware for that surface. Consult
with a certified child proofer, a handyman or your local
hardware store if you are unsure. Never mount into
hollow wall or hollow brick.

10
Step 3
With the C/D FastMount® Hinge Rail resting on the floor
in the desired location, use the provided Installation
Level to make sure it is vertical. Remove the protective
liner from the adhesive tape on the level so that the level
can be attached to the rail. Use the Marking Tool to mark
the 2 screw locations.
Step 4
Remove the screws that hold the top cover on the Top
Lock and remove the top cover, as well as the Main Lock
for access to the upper screw hole. Repeat Step 3 for the
Locking Rail.
Step 5
Attach the rails using the appropriate screws per above.
Main Lock
Top Cover