Qihan QH-D209SNH-4 User manual

Content
Specification
No Name QTY.
1. Vandalproof Dome Camera 1 2. UserGuide 1
Vandalproof Dome Camera
User Manual
Notes:Before providing power for the camera,
please read this User Guide in detail!
Do not attempt to disassemble the camera. If the camera can not work, please contact local franchiser or our company.
Pixels
700/TVL PAL:976*582 NTSC:976*494 540TVL PAL: 752x582 NTSC :768×494
Mini. Illumination 0.1 lux/F1.2 S/N Ratio 50dB LED 21EA IR View Distance 20M Vandalproof IP66 Electronic Shutter Time 1/50-1/100,000/S;1/60-1/100,000/S AWB Auto Gamma 0.45 Video Output BNC 1.0Vp-p 75 Ohm Synchronous System Internal Synchronization Lens Operating Temperature -10 ℃ ~+50 ℃ RH95%MAX Power DC12V 200mA , Adapter DC12V 1A Consumption Current 200mA(LED Off), 600mA( LED on) Material Body: Aluminum.
Dome: Polycarbonate V_0 degree in UL94
Dimension 62(w)*60(H)*121(D)mm Weight 1KG/pcs
Standard 4-9mm lens Auto Iris lens
1/3" Sony Effio-E 960H Exview CCD Maximum 700TVL 1/3” Sony HQ1 Color CCD 540TVL

PRODUCT IMAGE
CONNECTING
TROUBLE AND SOLUTION 1. No Picture after providing power . May be the power supply voltage abnormity, please check the power supply voltage and pole whether exactitude. . Please check all the connecting cable and monitors whether be connected correctly or not. 2. The picture level direction have flowing interference ripples . May be caused by the power supply AC ripples, it need filter the wave of the power supply. . Check the monitor and peripheral equipments used. 3. The picture background color changes continuously . The fluorescent lamp’s electromagnetic field cause color roll. This is proper phenomenon of the cameras. . Reduce the fluorescent lamp numbers or increase the distance between the camera and the fluorescent lamps can improve it. . Use power supply external sync. camera can solve it. 4. The picture smear too mass . The power supply’s voltage unstable. . Connecting cables not connect correctly or have high impedance.
Notes：
●The power supply must through safe attestation. Its output
voltage、current、voltage polarity and operating temperature must match the camera’s requirement.
●When using the camera in the thunderbolt condition,please
note to mount Anti-thunder device or put off the power supply plug and cable.
●In order to capture high quality pictures, the power supply’s
cable and video output cable should not be too long.
DC12V Power Supply
Monitor
Link wire
Power Video
Video
12V DC
INTRODUCTION
Congratulations on your purchase of this product. We
adopt the latest SONY technical of sensor and driver. The most attractive characteristics are water-resistant, and widely applicable to day & night, indoor & outdoor. In addition, it owns the characters of high definition and stability, strong anti-jamming, rich and real color. Fixing and using this model
are convenient too. It is very good for you to apply to yours CCTV system.
Please read this instruction manual carefully to ensure
proper use of the product.
Note: ● Please note the camera’s operating temperature and its
using environment requirement. Avoid using the camera at too high or too low temperatures. The operating temperature is -10℃-50℃. (Recommendatory operating temperature is - 5℃--40℃.)
● Never make the camera face the sun or bright object. Oth-
erwise, it will damage the CCD.
● Do not mount the camera near by the radiator or heater.
To prevent fire or shock hazarded. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
into water too long time directly.
important operating and maintenance (servicing) Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient Magnitude to constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BANCK NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.
CAUTION:
RISK OF ELECTRIC. DO NOT OPEN
CAUTION: To prevent electric shocks and risk of fire hazards, do NOT use other than specified power source.