Qimarox Securyfence User manual

Assembly instructions
Securyfence
Version 2.0 / 18-11-2015

Assembly instructions Securyfence
2
Copyright © Qimarox B.V.
All rights reserved. No part of this document may be copied, stored in a database and/or published by
means of printing, photocopying, microfilming or by any other means whatsoever without the prior
written permission from Qimarox B.V.

Assembly instructions Securyfence
3
Table of contents
Table of contents...................................................................................................... 3
1General............................................................................................................... 4
2Installing columns and panels ......................................................................... 5
2.1 Standard column .................................................................................................... 5
2.2 Shortening panels and tubes.................................................................................. 8
2.3 Creating an opening ............................................................................................... 9
2.4 Heavy duty column ...............................................................................................10
2.5 Machine mounted column .....................................................................................12
2.6 Wall mounted column............................................................................................13
2.7 Alternatieve corners - fixed ...................................................................................14
2.8 Alternatieve corners - adjustable ...........................................................................15
2.9 Adjustable column .................................................................................................16
2.10 Stacking columns ..................................................................................................17
3Single hinged door.......................................................................................... 19
3.1 Assembling single hinged door .............................................................................19
3.2 Mounting door switch on column ...........................................................................22
3.3 Fitting hinged door with T-Grip ..............................................................................24
4Double hinged door......................................................................................... 25
4.1 Assembling double hinged door ............................................................................25
4.2 Mounting door switches on lintel ...........................................................................29
4.3 Mounting door switches on door panel ..................................................................31
4.4 Fitting the hinged door with the T-Grip ..................................................................32
5Single sliding door.......................................................................................... 33
5.1 Assembling single sliding door ..............................................................................33
5.2 Mounting door switch on single sliding door ..........................................................38
6Double sliding door......................................................................................... 40
6.1 Assembling double sliding door .............................................................................40
6.2 Mounting door switches on rail ..............................................................................48
6.3 Mounting door switch on door panel double sliding door .......................................50
7Exploded views ............................................................................................... 52
7.1 Exploded views columns and panels .....................................................................53
7.2 Exploded view single hinged door .........................................................................55
7.3 Exploded view double hinged door (L) ..................................................................57
7.3 Exploded view double hinged door (R) ..................................................................58
7.4 Exploded view single sliding door .........................................................................61
7.5 Exploded view double sliding door (L) ...................................................................64
7.5 Exploded view double sliding door (R) ..................................................................65
7.6 Exploded view single hinged door H = 1020.........................................................68
7.7 Exploded view double hinged door H = 1020 (L) ..................................................70
7.7 Exploded view double hinged door H = 1020 (R) ................................................71

Assembly instructions Securyfence
4
1 General
This chapter provides general information about the Securyfence and these assembly instructions.
Corresponding documentation
Document
Reference
Manual
UM-SECURYFENCE_V1.0-EN
Assembly instructions
AI-SECURYFENCE_V2.0-EN
OEM parts of fencing
 Safety switch
Manuals of the fencing and OEM parts can be found at www.securyfence.com.
Intended use
The Securyfence components are to be used exclusively as fencing to prevent access to (dangerous)
zones or areas. Securyfence does not provide protection to heat, radiation, sound or any other danger
that can pass under, over or through the mesh of the fencing. Refer to the user manual for more
information. The stability of the fencing depends on the chosen layout. Any additional stability can be
achieved by supports to the wall, ceiling or other constructions.
Liability
Qimarox is not liable for unsafe situations, accidents and damage resulting from ignoring the instruction
in this manual and warnings in the user manual.
CE Declaration of Conformity
Components of Securyfence are conform the Machinery Directive 2006/42/EC. The declaration of
conformity is included in the user manual.
Relevant harmonised standards
The fencing of appropriate height must be placed at the appropriate distance to comply with the
Machinery Directive. Depending on the application, it may be required to install an interlock or a
interlock with guard locking on a door. Refer to the user manual for the relevant harmonised standards.
Observe local laws and regulations for additional standards and requirements.
Manufacturer
Qimarox B.V.
Nobelstraat 43
3846 CE Harderwijk
The Netherlands
Tel:[phone]
Fax:[phone]
E-mail: [e-mail]
Internet: www.qimarox.com

Assembly instructions Securyfence
5
2 Installing columns and panels
2.1 Standard column
Parts list standard columns
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
A
1000522
1000461
Wire mesh panel
H=2120 W=225
1000526
1000465
Wire mesh panel
H=2120 W=475
1000530
1000469
Wire mesh panel
H=2120 W=730
1000534
1000473
Wire mesh panel
H=2120 W=990
1000514
1000453
Wire mesh panel
H=2120 W=1240
1000518
1003055
Wire mesh panel
H=2120 W=1495
AE0006140
1001770
Wire mesh panel
H=1020 W=225
AE0006137
1003990
Wire mesh panel
H=1020 W=475
AE0006134
1001682
Wire mesh panel
H=1020 W=730
AE0006131
1001275
Wire mesh panel
H=1020 W=990
AE0006128
1000985
Wire mesh panel
H=1020 W=1240
AE0004663
1006571
Wire mesh panel
H=1020 W=1495
B
1000259
1000240
Mounting rod
W=225
1000261
1000241
Mounting rod
W=475
1000263
1000242
Mounting rod
W=730
1000264
1000243
Mounting rod
W=990
1000257
1000239
Mounting rod
W=1240
1000258
1002593
Mounting rod
W- 1495
C
1005364
1004848
Column
H=2255
AE0006162
AE0007796
Column
H=1165

Assembly instructions Securyfence
6
Installing columns and panels

Assembly instructions Securyfence
7
Different mounting positions of wire mesh panel

Assembly instructions Securyfence
8
2.2 Shortening panels and tubes
Only applicable when a non-standard panel width is required
Parts list shortening panels and tubes
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
D
1000309
1000309
Insert
Assembling

Assembly instructions Securyfence
9
2.3 Creating an opening

Assembly instructions Securyfence
10
2.4 Heavy duty column
Parts list heavy duty column
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
E
AE0005461
AE0007800
Column heavy duty
H= 2255
Different mounting positions of wire mesh panel 1/2

Assembly instructions Securyfence
11
Different mounting positions of wire mesh panel 2/2

Assembly instructions Securyfence
12
2.5 Machine mounted column
Parts list machine mounted column
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
F
1002442
1002445
Machine mounted L-channel
H=2120
Assembling

Assembly instructions Securyfence
13
2.6 Wall mounted column
Parts list wall mounted column
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
G
1006156
AE0000573
Column without base plate
H=2150
Assembling

Assembly instructions Securyfence
14
2.7 Alternatieve corners - fixed
Parts list alternatieve corners-fixed
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
H
1004231
1004236
Profile 30°
H=2174 incl. fasteners
1004233
1004237
Profile 45°
H=2174 incl. fasteners
1004234
1004238
Profile 60°
H=2174 incl. fasteners
Assembling

Assembly instructions Securyfence
15
2.8 Alternatieve corners - adjustable
Parts list alternatieve corners - adjustable
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
I
1000308
1006573
Corner eyebolt set
Assembling

Assembly instructions Securyfence
16
2.9 Adjustable column
Parts list adjustable column
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
G
1006156
AE0000573
Column without base plate
H=2150
J
AE0006152
AE0007807
Foot adjustable column
incl. fasteners
Assembling

Assembly instructions Securyfence
17
2.10Stacking columns
Parts stacking columns
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
K
AE0006282
AE0007804
Extender column
H= 2130
AE0006283
AE0007814
Extender column
H= 1030
L
AE0006257
AE0007811
Coupling piece column
incl. fasteners

Assembly instructions Securyfence
18
Assembling

Assembly instructions Securyfence
19
3 Single hinged door
3.1 Assembling single hinged door
Parts list single hinged door
Pos
Qty.
Part number
Steel
Part number
Stainless
Description
Notes
A
1
1005058
AE0005126
Lintel
W=730
1
1005060
AE0005140
Lintel
W=990
1
1005575
AE0005139
Lintel
W=1240
B
1
1005083
AE0005127
Door
W=730
1
1005084
AE0005135
Door
W=990
1
1005570
AE0005129
Door
W=1240
C
1
1005076
AE0005172
Mounting set incl. lock
C1
2
1005077
1005077
Scew-on hinge 60 x 90
C2
2
1005057
AE0005173
Door stopper
C3
1
1004964
AE0005169
Treaded plate 2 x M6
C4
1
1005067
1005067
Door latch incl. lock
C5
1
1005065
AE0005239
Bracket emergency opener
C6
1
1005068
1005068
Emergengy opener door lock

Assembly instructions Securyfence
20
Assembling single hinged door 1/2