WamBam AG14002 User manual

WWW.WAMBAMFENCE.COM 1
ASSEMBLY INSTRUCTIONS AG14002
AG14002
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
SLIM JIM
ALUMINUM GATE
WWW.WAMBAMFENCE.COM VER. 031721

WWW.WAMBAMFENCE.COM
2
ASSEMBLY INSTRUCTIONS
AG14002
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
care department.
parts.nychbrands.com
[e-mail]
704-892-5222 /877-778-5733
Customer service agents are available to take calls weekdays from 9am-
5pm EST.If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number AG14002 
found on page 5. It is helpful if you can provide the batch lot
which is a stamped number inside the box.

this product, we are happy to assist you with the process. Please
give us a call at 704-892-5222 / 877-778-5733.
If for some reason you need to return this product, please

return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING OR
DAMAGED PARTS?
NEED ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT

WWW.WAMBAMFENCE.COM 3
ASSEMBLY INSTRUCTIONS AG14002
1. Read over fence instrucons rst.
2. Pre-assemble the gate frame.
3. Install your gate posts before your fence posts.
4. Do not hang your gate system o a single non-supported post.

understand your fence.



install your gate posts before you do anything else.

of fence that is connected to another post. This way, the weight strain will be trans-
ferred onto two posts versus just one. Installing fence panels on both sides of your



your gate correctly, please disassemble as necessary, and use the included self-drilling
stainless steel screws to permanently assemble the gate.
1. That you have everything necessary to complete the gate.
2. That you will have assembled the gate frame in the correct order.
3. All of the pieces t and funcon properly.
4. The gate height and width are similar to the measurements shown on page four.
GENERAL INFORMATION


WWW.WAMBAMFENCE.COM
4
ASSEMBLY INSTRUCTIONS
AG14002
DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS
50in.
48in.
3.94in.
48in.
2in.
52in.
52in.
36in.
42in.
Metal Post Stabilizer
Gate Jig (Vinyl)
Ground
36in.
String Line
Ground
WamBam
Ornamental Anchor
This gate can be trimmed down both in width and

WamBam
Pipe Anchor

WWW.WAMBAMFENCE.COM 5
ASSEMBLY INSTRUCTIONS AG14002
STEP 1: LAY OUT MATERIALS
A B C
E
G
D
F
H
I
J
K
L
M
Gate Post Cap (2) Metal Post
Stabilizer (1)
Gate Jig (1)
1½” x 3½” x 55”
Picket (7)

Gate End
Assembly (2)
Boom Rail (1)
1” x 1” x 45”
Top Rail (1)
1” x 1” x 45”
Aluminum Gate
Hinge (2)
Latch Catch (1)
Latch Finger (1)
Nut and Bolt (8)
1¼” Self-Drilling
Stainless Steel
Screw (32)
⅝” Black Self-
Drilling Stainless
Steel Screw (20)

WWW.WAMBAMFENCE.COM
6
ASSEMBLY INSTRUCTIONS
AG14002
STEP 2: INSTALL GATE JIG, POST ANCHORS, AND POSTS
STEP 2.1 STEP 2.2

60” long x 6” wide x 5½” deep.

Stabilizer (C) and pound it into the ground.

into the metal post stabilizer and determine

Place the Gate Jig (B) over the
metal post stabilizer.


will insert into both the gate jig and the metal post
stabilizer.

Pound your post anchors into place. See


Adjust the leveling donuts and install the
posts.
Note: Metal post
stabilizer to be used
only on hinge post.
5½”
B
STEP 2.3
STEP 2.5 STEP 2.6
STEP 2.4
5½”
C

WWW.WAMBAMFENCE.COM 7
ASSEMBLY INSTRUCTIONS AG14002
STEP 2.7
Make sure to fasten the fence panels

STEP 3: INSERT PICKETS
STEP 3.1
Insert the Pickets (E)
(F) and align the holes in the pickets with

-
ing Stainless Steel Screws (M).

release at the point when the

the rail. If you force the screw,
you will strip it.
Align the pre-
drilled holes in
the pickets with
the pre-drilled
holes in the Top
Rail (G).
Secure the pickets

self-drilling stainless
steel screws
E
F
G
STEP 3.3 STEP 3.4
STEP 3.2
M
Align

WWW.WAMBAMFENCE.COM
8
ASSEMBLY INSTRUCTIONS
AG14002
STEP 4: FINISH ASSEMBLING THE GATE
STEP 4.1 STEP 4.2
STEP 4.3 STEP 4.4
Orient the Gate End Assembly (D) so it
faces up to receive the assembled panel.
Both rails must be inserted simultaneously to
prevent binding.
Insert the rails

for the bolt to be
installed later.
Flip the gate panel over, and insert it into the
opposite gate end assembly.
Insert the Bolts (K), fasten the

D
K
Align
Align

WWW.WAMBAMFENCE.COM 9
ASSEMBLY INSTRUCTIONS AG14002
STEP 5: ATTACH HINGES AND LATCH FINGER
STEP 6: ATTACH THE GATE TO THE FENCE PANEL
STEP 5.1 STEP 5.2
(H) to the gate post

Steel Screws (L).
(J) to the gate post

Use temporary spacers or blocks to rest the gate on during

self-drilling stainless steel screws.
HL
J
STEP 6.1

WWW.WAMBAMFENCE.COM
10
ASSEMBLY INSTRUCTIONS
AG14002
1.
steel screws into the pre-drilled holes on the inside of the hinges.
2. Align and fasten the Latch Catch (I)
(A).
STEP 6.2
I
Congratulaons! You did it! Go grab a beverage of your choice, admire your handiwork, and show us
what you got by entering our annual photo contest!
A
2
1

WWW.WAMBAMFENCE.COM 11
ASSEMBLY INSTRUCTIONS AG14002
ALTERNATIVE APPLICATION: INSTALL OVER A
SIDEWALK OR PATH
Opon 1: If the
sidewalk is less than
52”, use the gate jig as
a temporary spacer.
Proceed installing
the panels according
to the fence’s install
guide.
Sidewalk/path
STEP 1.1
ALTERNATIVE APPLICATION: INSTALL OVER A
SIDEWALK OR PATH
STEP 1.1
Sidewalk/path
Use the gate jig to ensure
proper spacing.
Opon 2: If the side-
walk is wider than 52”,
use surface mounts and

included with them.
Surface mounts must be
purchased separately and
can be found by searching
item SKU AP60301.

WWW.WAMBAMFENCE.COM
12
ASSEMBLY INSTRUCTIONS
AG14002
WWW.WAMBAMFENCE.COM
704-892-5222
877-778-5733
[e-mail]
6935 Reames Rd. Ste. K.
Charloe, NC 28216