Qomo QCamera User manual




V2.1
02/02/2022
Information in this manual is subject to change without notice

Software Download
Search for Qomo QCamera in the Mac App Store and download.
OR Go to www.qomo.com/QCamera
Software Operation
The software consists of two parts:
◼Camera Display Area
◼Toolbar
1. Camera Display Area
The defaultcamera will be displayed in this area and can be edited using tools in the
toolbar.
2. Toolbar





Check software version and related QOMO
information

Set Chinese/English

Exit software

Minimize the software

Selection tool

Annotate/ Select pen color and thickness

Erase annotation

Clear annotation


Screen shot


Screen snip

Take photo


Record the whole screen


Record live video


Zoom In/Out

Freeze image

0°/90°/180°/270° rotation

Mirror image

Adjust the brightness, contrast, saturation, focus and focal length

Choose camera and resolution

View photos and videos or open local files

Split the screen in two vertical parts for comparing live image
with captured picture

Note:
1. Recording, zoom, freeze, rotate, mirror, adjust, split features are only available when document
camera is connected.
2. When freeze is selected, zoom, rotate, mirror, and adjust are not available.
3. Main function introduction：
3.1 Annotate
Click icon to annotate over the live image. Pen thickness and color can be changed
by clicking on the icon. Note the default color is red.
3.2 Pixel Eraser
Click   to erase the annotation. Move the
Horizontal bar to adjust eraser size. Select to clear all annotation at once.
3.3 Capture
Click to capture your screen fully or partially.
Full screen capture: Click , the full screen will be captured and saved locally.
Region capture：Click , to capture selected region, click to save the capture.

3.4 Record
Click      to start recording
video (select recording screen or camera image). On the left corner, there will be a
window to show recording time, pause or stop recording. The video
will be saved in locally. You can open it through your file explorer or from the software.
3.5 Freeze
Click icon to freeze live image. The icon will become blue. Click it again to unfreeze.
3.6 Camera
Click →, choose appropriate camera and resolution.
Note ： Software will save the last resolution chosen.

Troubleshooting




Poor connection
Check if the USB power
cable is connected and the
LED light is illuminated.

1. Not enough light or too
much light or
2. Object beyond focus
3. Dirt on camera lens
1. Turn on/off Lamp Light
and move camera
slightly to refocus.
2. Use cloth to clean the
camera lens




Document Camera is being
used in another program
Re-connect the USB and
choose the device
Restart software
Close other software device
is being used in

Computer configuration might
be low
Change the Camera to
lower definition

Focus is in manual mode
Change to auto mode in the
Focus Menu