Quantaray DPF15K User manual
Quantaray
by Sunpak
15” digital photo frame
User Manual
Stock no. 81-166-0349
1. Product Introduction:
Congratulations! You are now the proud owner of the 15” Digital Picture
Frame. Boasting high-quality image resolution, the Digital Picture Frame is the
perfect product for displaying your most cherished memories. You can configure
it to display photos as slide show or as a still picture. With its ease of use and
configuration, you can now exhibit all your favorite pictures or video files for
everyone to see!
2. Package Contents:
Before using the Digital Picture Frame, be sure to check all of the accessories
contained in the package. The Digital Picture Frame comes with the following
items:
·Digital Picture Frame
·AC adaptor
·Remote Control
·User Manual
·USB Cable
·One Year Limited Warranty Card
3. Features:
Display picture and video files without a computer
Listen to MP3 audio while displaying photos
Simple operation: insert the memory card, card reader, memory stick
or photo bank into the photo frame to view picture and video files or
listen to MP3
Support: CF—MS/SD/MMC
TFT-LCD with high resolution, wide view angle and rich color
Easy to use remote control for displaying and managing your files
Built-in stereo speakers
The frame is changeable, various decorative frame in stylish and color
for your selection
Stand
CF
4. Specifications
Type DPF15K
Display Area 228.1(h) x 304.1(v)S
Resolution 1024x768
Colors 16.7M
Contrast angle 450:1
Viewing angle 65/65
(
l/r
)
, 60/50
(
u/d
)
Itlt
AC100—240V(50HZ—60HZ)
Power VESA DPMS
Operation Temperature
0
℃
50
℃
Net Weight 3.5kg
Media MPEG1/2/4, JPG/JPEG
Card CF /MS/SD/MMC/Mini USB
Auto Start Mode Auto Slide Show JPEG
Photo Playback Mode
1. Loop, Zoom In
2. Auto Slide Show
3. Slide Show with background MP3 music
4. File name, File size, Resolution, Date Display
5. Interval Time Setup
6. Transition Setup
7. Play/Stop/Pause
Music Playback Mode
1. Play/Stop/Pause
2. Volume Adjust
3. Mute Function
4. Repeat Model Setup
5. File Type, Total Time, Date, Display
Video Playback Mode
1. Play/Stop/Pause
2. Volume Adjust
3. Mute Function
4. Zoom in
5. File information, Time and Date Display
Accessories
1. Remote Control
2. AC Adaptor
3. Operation Manual
4. USB Cable
5. Controls and Media Ports
Display
DecorativeFrame
6. Setup
·Open the package and remove the protective foam. Remove the protective
sleeve from the unit.
·Plug theAC adaptor into a power outlet. Plug the other end into the unit.
·After the content (picture/video/mp3) is stored on a memory card/target flash
media, insert the media into the proper slot.
·Turn power on via the On/Off switch, which is located on the right side of the
frame
·As a default, the first file in the card will be displayed first. The play sequence
is automatically sorted by the file name, alphabetically, regardless of file type.
Therefore, an MP3 could be played first followed by a second MP3 or an
image or video file.
OK
Power
MS/SD/MMC
Mini USB
Menu
Volume Up
Volume Down
Replacing the Remote Control Battery
1—Remove the battery
compartment cover by
pulling the cover in the
direction of the arrow.
2—Remove the battery.
3—Insert the replacement
battery, taking note of the
correct polarities (+/-).
4—Replace the cover.
Caution:
1. Only use a 3V CR2025 battery.
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the battery when not using the Flash Player for prolonged
periods.
7.RemoteControl:
8. Playing a Slideshow in Music
A. First press the “Music” key to enter the music database. Use
the arrow keys to select the desired music file.
B. Press the “Slideshow” key. The frame will play the selected
MP3 while playing a slideshow.
9. Replacing Remote Control Battery
10. USB Function Description
The USB Port supports USB devices like MP3’s, photo banks & card
readers, but is not directly compatible with computers.
System Setup
•
press
the
Power
button
on
your
remote
control
to
power
up
the
system.
If
no media card is inserted it will show ”NO MEDIA DETECTED”.
Multiple Cards in System
If the DMP system contains more than one device/card, the Multiple Cards
Present Screen will appear. Use the Up/Down navigation buttons to move
through the selections and press Enter to select. If only one device is present,
the Multiple Cards Present Screen
will
not
appear.
Multiple
Cards
Present
Screen
Multiple Contents in Card
If
there
is
more
than
one
content/file
on
the
device/card,
the
Multiple
Contents
in
Card Screen
will
appear.
Use
the
Left/Right
navigation
buttons
to
move
through
the selections
and
press
Enter
to
select.
If
only
one
content
is
present
in
the
card,
the Multiple
Content
in
Card
screen
will
not
appear.
Multiple
Contents
in
Card
Screen
Setup Main Page
The
Setup
Main
Page
is
shown
below.
Use
the
navigation
buttons
to
move
up
and
down the
options
and
press
Enter
to
select.
Setup
Main
Screen
Photo Setup
The
Photo
Setup
is
illustrated
in
the
following
section.
Thumbnail Digest
The
(photo)
Thumbnail
Digest
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move
through
the
options
and
press
Enter
to
select.
Thumbnail
Digest
Setup
Screen
•
Selecting
ON
will
display
the
photo
thumbnails
using
the
original
thumbnail
files created
by
the
digital
camera
and
stored
within
the
memory
stick.
This
process
will make
displaying
thumbnails
of
large
photos
in
a
short
time
(factory
default
mode).
•
Selecting
OFF
will
display
the
photo
thumbnails
by
decoding
the
photo
and
scaling down
to
fit
into
the
display
area
allocated
for
the
thumbnail.
This
process
may
take
a longer
time
if
the
photos
are
of
high
resolutions
(big
files).
Music Setup
The
Music
Setup
is
illustrated
in
the
following
section.
Repeat Mode
The
Repeat
Mode
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
Repeat
Mode
Setup
Screen
•
Selecting
ONE
will
repeat
the
highlighted
music
continuously,
until
the
Stop
button is
pressed.
•
Selecting
ALL
will
repeat
all
the
music
files
in
the
music
library
continuously,
until the
Stop
button
is
pressed
(factory
default
mode).
•
Selecting
OFF
will
disable
the
repeat
feature.
Music
playback
will
start
from
the highlighted
music
file until
the
last
music
file
found
in
the
music
library
and
then
stop.
(The
Repeat
button
on
the
remote
control
can
still
provide
the
Repeat
feature
if
so desired
Slideshow Setup
The
Slideshow
Setup
is
illustrated
in
the
following
sections.
Slideshow Mode
The
Slideshow
Mode
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
Slideshow
Setup
Screen
•
Selecting
MANUAL
will
give
full
control
of
the
photo
slideshow
timing
to
the
user.
The user
will
need
to
use
the
navigation
keys
of
the
remote
control
to
scroll
through
the photos
stored
in
the
memory
card.
•
Selecting
AUTO
will
make
the
photo
slideshow
start
automatically
after
displaying the
photo
thumbnails
for
about
10
seconds
(factory
default
mode).
Folder Repeat
The
Folder
Repeat
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
Slideshow
Setup
Screen
•
Selecting
ON
will
turn
on
the
repeat
mode
indefinitely,
until
the
Stop
button
is pressed
(factory
default
mode).
•
Selecting
OFF
will
turn
off
the
repeat
mode.
Interval Time
The
Interval
Time
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
Interval
Time
Setup
Screen
•
Selecting
ONE
SECOND
will
display
the
photo
for
1
second
before
switching
to another
photo,
during
a
photo
show.
•
Selecting
THREE,
FIVE,
TEN
SECONDS
or THIRTY SECONDS
will
display
a
photo
for
3,
5,
10 or 30 seconds
before
switching
to
another
photo
during
a
photo
show
(factory
default
is
3 seconds)
Transition Setup Page
The
Transition
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
Transition
Setup
Screen
•
Selecting
FULL
SCREEN
will
display
the
full
photo
at
once.
(factory
default
mode)
•
Selecting
the
other
modes
will
display
the
photo
using
the
transition
chosen.
The
photo
transition
choices
are:
1:
Full
Screen
(at
once)
2:
Top-to-Bottom
(roll)
3:
Bottom-to-Top
(roll)
4:
Top/Bottom-to-Center
(roll)
5:
Center-to-Top/Bottom
(roll)
6:
Top-to-Bottom
(blind)
7:
Left-to-Right
(roll)
8:
Right-to-Left
(roll)
9:
Left/Right-to-Center
(roll)
10:
Center-to-Left/Right
(roll)
11:
Corners-to-Center
(implode)
12:
Left-to-Right
(blind)
13:
Random
(from
the
12
transition
modes
above)
Auto Start Setup Page
The
Auto
Start
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
Transition
Setup
Screen
•
Selecting
ON
will
start,
after
power
on,
the
automatic
playback
of
all
the
photo,
music, and
video
files
found
in
the
DMP
system,
sequentially,
in
an
alphabetical
order
based on
the
filenames.(no
thumbnails
page
display)
•
Selecting
OFF
disables
the
automatic
playback
of
all
contents
after
power
on
of
the system.
(factory
default
mode)
Movie Setup
The
Movie
Setup
is
illustrated
in
the
following
section.
Interval Time
The
(Video
Thumbnails)
Interval
Time
Setup
Screen
is
shown
below.
Use
the
navigation buttons
to
move
through
the
options
and
press
Enter
to
select.
Interval
Time
Setup
Screen
•
Selecting
FAST
will
display
the
video
thumbnails
at
a
faster
rate,
using
the
first
frame of
each
video
as
its
thumbnails.
•
Selecting
NORMAL
will
display
the
video
thumbnails
with
a
three
seconds
playback of
the
videos
in
QCIF
mode.
This
takes
a
longer
time
to
fill
up
the
thumbnail
page.
Preference Setup Page
The
System
Preference
Setup
is
illustrated
in
the
following
sections.
TV Type
The
TV
Type
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move
through the
options
and
press
Enter
to
select.
TV
Type
Setup
Screen
•
Selecting
MULTI
SYSTEM
allows
for
automatically
detection
of
the
type
of
TV monitor
used
(NTSC
or
PAL)
and
display
the
corresponding
video
accordingly
(factory default
mode).
•
Selecting
NTSC
will
fix
the
video
output
to
NTSC
mode.
•
Selecting
PAL
will
fix
the
video
output
to
PAL
mode.
Video Output
The
Video
Output
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
Video
Output
Setup
Screen
•
Selecting
S-VIDEO
will
output
the
video
to
Composite
and
S-Video
(factory
default mode).
•
Selecting
YPBPR
will
output
the
video
to
Component
video
in
Progressive
YUV
mode (ES6420FP
only).
•
Selecting
RGB
will
output
the
video
to
VGA.
(ES6420FP
only)
OSD Language
The
OSD
Language
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
Enter
to
select.
OSD
Language
Setup
Screen
•
Selecting
ENGLISH
will
display
the
OSD
in
English
(factory
default
mode).
•
Selecting
CHINESE
will
display
the
OSD
in
Chinese.
•
Selecting
JAPANESE
will
display
the
OSD
in
Japanese.
Defaults
The
Factory
Default
Setup
Screen
is
shown
below.
Use
the
navigation
buttons
to
move
to
the
RESET
button
to
restore
the
factory
default
settings.
Default
Setup
Screen
Note:
All
setting
changes
are
saved
in
the
non-volatile
EEPROM
in
the
DMP
system.
Digital Photo Display
The
digital
photo
display
is
initiated
in
three
ways:
(1)
only
photos
are
present
in
the device/card,
(2)
the
Photo
option
was
selected
from
the
Multiple
Contents
in
Card
screen, or
(3)
the
Photo
shortcut
button
on
the
remote
control
was
pressed.
In
the
digital
photo
display
mode,
the
Photo
Thumbnails
Screen
will
appear.
All
the photos
found
in
the
device/card
will
be
displayed
in
continuous
pages
of
photo
thumbnails.
If
the
device/card
has
more
than
one
folder
and
you
desire
to
view
the
photos
by
folder,
go to
chapter
six
(6)
“File
Library
Management”
for
how
to
access
individual
folders.
Use
the
navigation
buttons
to
move
through
the
thumbnails
in
the
thumbnail
page,
and use
the
I
<<
and
>>
I
buttons
to
jump
to
the
previous
or
next
page
of
thumbnails.
If
the
Slideshow
Mode
option
in
the
SETUP
menu
is
set
to
AUTO,
the
Photo
Show
will start
automatically
after
about
ten
(10)
seconds.
If
the
Auto
Start
option
in
the
SETUP
menu
is
set
to
ON,
the
playback
of
all
files
at Power-Up
would
be
in
effect
and
the
Photo
Thumbnails
Screen
will
not
be
visible.
Photo
Thumbnails
Screen
•
Press
the
ENTER
button
on
the
remote
control
to
display
the
highlighted
thumbnail in
full-screen.
Once
in
full-screen,
pressing
the
ENTER
button
again
will
return
to
the Photo
Thumbnails
Screen.
•
Press
the
PLAY/PAUSE
button
on
the
remote
control
to
start
the
Photo
Show.
Once in
photo
show,
press
PLAY/PAUSE
button
to
pause
or
resume
the
Photo
Show;
press the
STOP
button
to
return
to
the
Photo
Thumbnails
Screen.
•
If
so
desired,
press
the
DELAY
button
on
the
remote
control
to
set
a
new
time
delay
of your
choice
for
the
display
of
the
photos,
different
from
the
s
ettings
in
the
SETUP menu.
•
If
so
desired,
press
the
REPEAT
button
on
the
remote
control
to
set
a
new
repeat
mode of
your
choice,
different
from
the
settings
in
the
SETUP
menu.
•
If
so
desired,
press
the
TRANS
button
on
the
remote
control
to
set
a
new
photo
display transition
mode
of
your
choice,
different
from
the
settings
in
the
SETUP
menu.
•
Press
the
M-SLIDE
button
on
the
remote
control
to
initiate
the
Music
Slideshow. Music
files
must
be
present
in
order
to
have
music;
otherwise,
it
will
only
be
a
Photo Show.
Music
Slideshow
can
be
initiated
either
from
the
Photo
Thumbnails
Screen
or after
the
Photo
Show
has
started.
•
Press
the
ROTATE
button
on
the
remote
control
to
change
the
rotation
of
the
display of
a
photo.
Not
available
when
in
Music
Slideshow.
•
Press
the
ZOOM
button
on
the
remote
control
to
zoom-in
the
display
by
a
factor
of
2X, 3X
and
4X.
Pressing
ZOOM
once
more
will
return
the
display
to
its
original
un- zoomed
state.
While
in
the
Zoom
mode,
use
the
navigation
buttons
to
pan
the
display Left,
Right, Up
or
Down.
Not
available
when
in
Music
Slideshow.
•
Press
the
HOME
button
on
the
remote
control
to
jump
to
the
main
level
of
the
DMP software
application.
•
Press
the
DISPLAY
button
on
the
remote
control
to
view,
by
OSD,
the
properties
of the
photo
displayed
on
screen.
•
Press
the
MUSIC
button
on
the
remote
control
to
jump
to
the
Music
Library
Screen.
If no
music
file
is
present,
no
action
takes
place.
•
Press
the
VIDEO
button
on
the
remote
control
to
jump
to
the
Video
Thumbnails Screen.
If
no
video
file
is
present,
no
action
takes
place.
•
Press
the
FILE
button
on
the
remote
control
to
jump
to
the
File
Management
Screen.
Digital Music Playback
The
digital
music
playback
is
initiated
in
three
ways:
(1)
only
music
files
are
present
in the
device/card,
(2)
the
Music
option
was
selected
from
the
Multiple
Contents
in
Card screen,
or
(3)
the
Music
shortcut
button
on
the
remote
control
was
pressed.
In
the
digital
music
playback
mode,
the
Music
Library
Screen
will
appear.
All
the
music files
found
in
the
device/card
will
be
displayed
in
a
continuous
list
of
music
files.
If
the device/card
has
more
than
one
folder
and
you
desire
to
playback
the
music
files
by
folder, go
to
chapter
six
(6)
“File
Library
Management”
for
how
to
access
individual
folders.
Use
the
navigation
buttons
to
move
through
the
music
files.
The
highlighted
music
starts to
play
automatically.
Press
STOP
to
stop
the
playback.
If
the
Auto
Start
option
in
the
SETUP
menu
is
set
to
ON,
the
playback
of
all
files
at
Power-Up
would
be
in
effect
and
the
Music
Library
Screen
will
not
be
visible.
Music
Library
Screen
•
Press
the
PLAY/PAUSE
button
on
the
remote
control
to
pause
or
resume
the
music.
•
Press
the
STOP
button
on
the
remote
control
to
stop
the
music.
Digital
Music
Playback
•
If
so
desired,
press
the
REPEAT
button
on
the
remote
control
to
set
a
new
repeat
mode of
your
choice,
different
from
the
settings
in
the
SETUP
menu.
–REPEAT
ALL:
repeats
all
the
files
in
the
library
sequentially
–REPEAT
ONE:
repeats
the
highlighted
music
only
–REPEAT
OFF:
music
stops
when
the
end
of
the
library
is
reached.
•
Press
the
M-SLIDE
button
on
the
remote
control
to
initiate
the
Music
Slideshow. Photos
must
be
present
in
order
to
have
slideshow;
otherwise,
it
will
only
be
music playback.
•
Press
the
VOL
button
on
the
remote
control
to
change
the
volume
of
the
music.
•
Press
the
MUTE
button
on
the
remote
control
to
mute
the
music.
•
Press
the
HOME
button
on
the
remote
control
to
jump
to
the
main
level
of
the
DMP software
application.
•
Press
the
DISPLAY
button
on
the
remote
control
to
display
a
Graphics
Equalizer
to accompany
the
music
playback.
Pressing
DISPLAY
again
will
hide
it.
•
Press
the
PHOTO
button
on
the
remote
control
to
jump
to
the
Photo
Thumbnails Screen.
If
no
photo
file
is
present,
no
action
takes
place.
•
Press
the
VIDEO
button
on
the
remote
control
to
jump
to
the
Video
Thumbnai
ls Screen. If no video file is present, no action takes place.
• Press the FILE button on the remote control to jump to the File Man
agement
Screen.
Digital
Video
Playback
The
digital
video
playback
is
initiated
in
three
ways:
(1)
only
videos
are
present
in
the device/card,
(2)
the
Video
option
was
selected
from
the
Multiple
Contents
in
Card
screen or
(3)
the
Video
shortcut
button
on
the
remote
control
was
pressed.
In
the
digital
video
playback
mode,
the
Video
Thumbnails
Screen
will
appear.
All
the videos
found
in
the
device/card
will
be
displayed
in
continuous
pages
of
video
thumbnails.
If
the
device/card
has
more
than
one
folder
and
you
desire
to
view
the
videos
by
folder,
go to
chapter
six
(6)
“File
Library
Management”
for
how
to
access
individual
folders.
Use
the
navigation
buttons
to
move
through
the
thumbnails
in
the
thumbnail
page,
and use
the
I
<<
and
>>
I
buttons
to
jump
to
the
previous
or
next
page
of
thumbnails.
If
the
Auto
Start
option
in
the
SETUP
menu
is
set
to
ON,
the
playback
of
all
files
at Power-Up
would
be
in
effect
and
the
Video
Thumbnails
Screen
will
not
be
visible.
Video
Thumbnails
Screen
•
Press
the
ENTER
button
on
the
remote
control
to
playback
the
highlighted
thumbnail in
full-screen.
Once
in
full-screen,
pressing
the
ENTER
button
again
will
return
to
the Video
Thumbnails
Screen.
•
Press
the
PLAY/PAUSE
button
on
the
remote
control
to
start
the
Video
press
PLAY/PAUSE
button
to
pause
or
resume
the
Video
Show.
Digital Video Playback
Press the
STOP
button
to
return
to
the
Video
Thumbnails
Screen.
•
Press
the
VOL
button
on
the
remote
control
to
change
the
volume
of
the
video.
•
Press
the
MUTE
button
on
the
remote
control
to
mute
the
video.
•
Press
the
HOME
button
on
the
remote
control
to
jump
to
the
main
level
of
the
DMP software
application.
•
Press
the
DISPLAY
button
on
the
remote
control
to
view,
by
OSD,
the
properties
of the
video
displayed
on
screen.
•
Press
the
PHOTO
button
on
the
remote
control
to
jump
to
the
Photo
Thumbnails Screen.
If
no
photo
file
is
present,
no
action
takes
place.
•
Press
the
MUSIC
button
on
the
remote
control
to
jump
to
the
Music
Library
Screen.
If no
music
file
is
present,
no
action
takes
place.
•
Press
the
FILE
button
on
the
remote
control
to
jump
to
the
File
Management
Screen.
File
Library
Management
The
File
Library
Management
is
initiated
by
either
selecting
File
from
the
Multiple
Contents
in
Card
screen
or
pressing
the
File
shortcut
button
on
the
remote
control.
The
File
Library
Management
Screen
will
appear.
Use
the
navigation
buttons
to
move through
the
thumbnails
and
press
ENTER
to
select.
File
Library
Management
Screen
•
Selecting
DEVICES
allows
a
user
to
switch
to
a
different
device/card.
•
Selecting
a
photo
folder
(i.e.
PHOTOS)
allows
a
user
to
manage
the
Photo
Library.
•
Selecting
a
music
folder
(i.e.
MP3
MUSIC)
allows
a
user
to
manage
the
Music
Library.
•
Selecting
a
video
folder
(i.e.
MOVIES)
allows
a
user
to
manage
the
Video
Library.
Devices
The
Device
Selection
Screen
is
shown
below.
Use
the
navigation
buttons
to
move through
the
options
and
press
ENTER
to
select.
Device
Selection
Screen
Photos Library
The
Photos
Library
Screen
is
shown
below.
Use
the
navigation
buttons
to
move
through the
photos.
You
will
see
a
preview
of
each
photo
as
well
as
its
file
properties.
Photos
Library
Screen
•
Pressing
ENTER
on
the
remote
control
will
start
a
Photo
Show
from
the
photo currently
highlighted.
While
in
the
Photo
Show,
all
the
features
such
as
Delay, Repeat,
Transition,
Rotate,
Zoom,
Pause
and
Resume
will
work,
and
pressing ENTER
or
STOP
will
return
the
display
to
the
Photos
Library
Screen.
Music Library
The
Music
Library
Screen
is
shown
below.
Use
the
navigation
buttons
to
move
through the
music
files.
The
highlighted
music
starts
to
play
automatically
with
the
file properties
displayed.
Music
Library
Screen
•
Pressing
ENTER
on
the
remote
control
will
start
the
playback
of
all
the
music
files beginning
from
the
highlighted
music
file
until
the
last
music
file
in
the
library,
with a
Graphics
Equalizer
display.
While
in
music
playback
mode,
all
the
features
such
as Next,
Previous,
Pause,
and
Resume
will
work,
and
pressing
ENTER
or
STOP
will return
the
display
to
the
Music
Library
Screen.
Videos Library
The
Videos
Library
Screen
is
shown
below.
Use
the
navigation
buttons
to
move
through the
videos.
You
will
see
a
preview
of
each
video
as
well
as
its
file
properties.
Video
Library
Screen
•
Pressing
ENTER
on
the
remote
control
will
start
a
Video
Show
from
the
video
currently
highlighted.
While
in
the
Video
Show,
all
the
features
such
as
Next,
Previous,
Pause,
and
Resume
will
work,
and
pressing
ENTER
or
STOP
will
return
the
display
to
the
Video
Library
Screen.
Table of contents
Other Quantaray Digital Photo Frame manuals
