Quantaray 5.6" Digital Photo Frame User manual

1
Quantaray by Sunpak
5.6” Digital Photo Frame
Stockno.81-166-0497

2
Opening Screen
Screen 2

3
LOCATION OF FRAME CONTROLS

4
REMOTE CONTROL
Remote Control Buttons
1. POWER: Turns digital photo frame on and off
2. SETUP: Activates on screen display settings
3. TIME: Displays calendar and time
4. MUSIC: Play music with a single press
5. PHOTO: Display thumbnails
6. VIDEO: Display video files
7. X/II : Play/Pause
8. UP: Move up
9. EXIT/: Return to previous screen
10.LEFT: Move left
11.ENTER: Use to select highlighted item
12.RIGHT: Move right
13.IWW : Previous
14.DOWN: Move down
15.XXI : Next
16.- : Decrease volume
17.+ : Increase volume
18.SLIDE: Slideshow
1
2
4
8
3
5
9
6
11
12
15
18
17
7
10
1
14
16

5
TURNING ON
1. Plug the AC-DC adapter into the port marked DC 12V located on the back
frame.
2. Press the power switch to the ON position. The unit will display the opening
screen.
DISPLAYING IMAGES
1. Insert a memory card or USB driver that contains JPG image files into the
SD/MMC/MS card slot or USB port.
2. Turn the digital photo frame ON.
Operate by using the remote control
zAt the opening screen select either CARD or USB with the RIGHT or
LEFT buttons on the remote control and press the ENTER button.
zThen select the PHOTO icon using the RIGHT or LEFT buttons or
activate by using the PHOTO button.A series of thumbnail pictures will
then appear on the screen. If you have MP3 files on the memory card or
USB drive they will automatically play in the background.
zSelect a photo with the UP/DOWN/LEFT/RIGHT on the remote control
and press then press ENTER to select.
zPress XXI to display the next photo. Press IWW to display a previous
photo.
zFor slideshow, press the SLIDE button.

6
FAVORITE IMAGES
Display two different pictures without a memory card or USB drive.
1. When a photo is displayed in full screen mode from a memory card or USB
drive, press the PHOTO button. Along with the photo a message will
appear on the bottom left side of the screen stating: DON’T POWER OFF.
2. Then a second message will appear: SAVE LOGO 1 OK.
3. To save a second favorite image, repeat the process.
4. To activate this feature, select the FAVORITE option at the opening
screen.
Note:
1. The zoom, rotate functions do not apply for the favorite photos.
2. Only two pictures can be stored under the FAVORITE function at one time
and if a new image is selected to be a FAVORITE then the last picture saved
will replaced.
MUSIC PLAYBACK
1. Insert memory a card or USB driver that contains music files into the card
slot or USB port respectively.
2. Turn the digital photo frame ON.
Operate by using the remote control
zAt the opening screen select CARD or USB you had inserted.
zPress the ENTER button, select the MUSIC icon or press the MUSIC key,
then a list of available file names will displays on the right of screen; the
first file will play automatically.
zPress the UP or DOWN key to highlight the file you want and then press
the ENTER key to select.
zPress the SLIDE key to start a slideshow with your selected music.
zTo pause/play press the X/II button.
zTo stop the slideshow press the EXIT button to return to the opening
screen.

7
VIDEO PLAYBACK
1. Insert memory card or USB driver that contains video files into the card slot
or USB port respectively.
2. Turn the digital photo frame ON.
Operate by using the remote control
zAt the opening screen select CARD or USB you had inserted,
zPress the ENTER button, select the VIDEO icon or press the VIDEO key,
then a list of available file names will display on the right side of the screen;
the first file will be play automatically.
zPress the UP or DOWN key to highlight the file you want and then press
the ENTER key to select.
zTo pause play press the X/II button
zTo stop the video press the EXIT button to return to the video file screen.
USER SETTINGS
Entering and leaving the SETUP menu:
(ii) Press the SETUP button on the remote control or the SETUP key at the
rear of the unit to enter, press again to leave.
Entering and leaving the sub-menu and selecting options:
(i) Navigate with the UP, DOWN, LEFT and RIGHT buttons on the remote
or the buttons on the photo frame. Use the ENTER button to select.
(ii) Press the EXIT button on the remote control or the EXIT button on the
rear of the frame to leave the menu.

8
SYSTEM SETUP
On Screen Display Languages: English, German, French, Portuguese.
To select use the RIGHT and LEFT buttons on the remote control.
DEFAULT: RESTORE – Restore factory settings
FIRMWARE VERSION: Noted on screen and cannot be changed by user

9
PHOTO SETUP
EFFECT:
OFF, WIPE BOTTOM, WIPE LEFT, WIPE LEFT, WIP RIGHT,
LEFT TOP, RIGHT TOP, LEFT BOTTOM, RIGHT BOTTOM,
EXTEND FROM H, EXTEND FROM V, COMPRESS TO H,
COMPRESS TO V, WINDOW H, WINDOW V, WIPE TO CENTER,
RANDOM, and WIPE TOP.
FREQUENCY: Time between photos
5 SECONDS, 10 SECONDS, 30 SECONDS, 1 MINUTE or 30 MINUTES

10
Music: Display music information: file name, size, and resolution.
ON/OFF
JPEG INFO: Displays photo information: file name, size, and resolution.
ON/OFF
PLAY MODE: Cycles through photos in sequence or in a completely
random manner.
NORMAL/RANDOM

11
PICTURE SETUP (factory settings in brackets)
BRIGHTNESS: 12 levels (6)
CONTRAST: 12 levels (6)
HUE: 12 levels, -6 to +6 (0)
SATURATION: 12 levels (0)
SHARPNESS: 8 levels (0)
CLOCK SETUP
DATE SETUP: Sets date (Year, Day and Month)
2000/01/08
TIME SETUP: Sets time (Military 24 hours)
13:28
ALARM SETUP: (option for selected models only)
19:30/OFF
POWER ON: Set to turn on automatically
08.00/OFF
POWER OFF: Set to turn off automatically
22:00/OFF

12
AUTO POWER ON/OFF
To activate this function the time must be set to turn the unit ON or OFF. Enter
POWER OFF sub-menu by going to the main screen and select SETUP and
ENTER. On the SYSTEM SETUP screen use the DOWN button and select
CLOCK SETUP. Use the time setting and change to desired time for auto
power off. Enter POWER ON sub-menu. Select the time setting and change to
desired time for auto power on.
SET ALARM
Enter ALARM SETUP sub-menu and select the time setting. Change to
desired time for alarm. To stop the alarm, press any key.
Note: Functions are only available when PHOTO, MUSIC or VIDEO is inactive

13
TECHNICAL SPECIFICATIONS
Support Cards/USB Memory Stick®(MS),
MultiMediaCard™(MMC), Secure Digital™
(SD), USB Flash Drives
Supported file formats JPEG, BMP, MP3 and MP4
LCD Display 5.6”
Resolution 320 x 240
Viewing Modes Full frame 4:3 StandardAspect Ratio, Slide
Show, Thumbnail
Note: when displays 16:9 photos with top
and bottom of screen darkened
Image Effects Flip, Rotate, Zoom
USB Host (USB Port) USB connects to mass storage devices
(USB flash drives) via the USB connector.
Power Input 12V DC, 1.2A
Product design and specifications subject to change without notice
REMARKS:
1)Unit does not support SDHC cards
2)Image information other than in the languages supported may be
display incorrectly.
3)On power up the screen could take up to 5 seconds to become
active.
4) The unit displays 4:3 photos in full screen. Photos not of this
aspect ratio may have some areas of the screen displayed in
black.
Frequently asked questions
1) Q: Can I use touch-enabled technology for my Digital Picture
Frame?
A: The LCD screen does not support touch-enabled technology.
Please use the buttons to control the Digital Picture Frame.
2) Q: If I keep showing the same photo for a long time, will it
damage the LCD screen?
A: No. The Digital Picture Frame can display the same photo

14
continuously for a long time. But it is recommended not to show the
same picture continuously for more than 1 month.
3) Q: What is the best picture resolution displayed on the screen?
A: The frame’s best resolution is 320x240.
47) Q: Does it play every type of AVI and or MPEG4 videos?
A: No. The device only works with the AVI and MPEG4 files taken
by most digital cameras.
5) Q: How come the Digital Picture Frame does not show some of
my photos?
A: The Digital Picture Frame is designed to show photos following
the same camera industry standards format as digital cameras.
This format is a JPEG format. Images, such as web images,
scanned images, or photos in RAW format, are not stored
according to camera industry standards and therefore cannot be
displayed correctly on the Digital Picture Frame. You can use a PC
application to convert such images into standard JPEG format
before viewing them on the digital photo frame.
Maintenance and Precaution
•The digital photo frame is for indoor use only.
•To reduce the risk of fire or electric shock; do not expose this
unit to rain or moisture.
•Do not block the ventilation holes on the back of the digital
photo frame at any time.
•Keep your digital photo frame out of direct sunlight. Direct
sunlight may cause damage. Do not attempt to open or repair
of the digital photo frame. There is a risk of electric shock,
and there are no user serviceable parts inside. Opening the
case will void your warranty.
•Do not use the digital photo frame if conditions could allow
condensation to occur, or damage may result.
•Your digital photo frame is a complex electronic device and
cannot withstand excessive impacts or shocks.

15
Cleaning the LCD screen
•Treat the screen with care. The screen a liquid crystal and
can be easily scratched, broken or damaged.
•For fingerprints or dust we recommend using a soft,
non-abrasive cloth such as a camera lens cloth to clean the
LCD screen.
•If you use an LCD cleaning kit sold in a photo specialty store,
apply the cleaning liquid to the cloth. Do not apply the liquid
directly to LCD screen.
Replace the battery of the remote control:

16
Regulatory Compliance
CE Declaration of Conformity
Attestation RSH05080201-1, RSH06080201-2
We declare under our responsibility that the product is in conformity
with the following standards
EN55022:1998 (Radio Disturbance requirement of Information
Technology Equipment)
EN55024:1998 (Immunity requirement of Information Technology
Equipment)
EN61000-3-2:2000 (Limits for Harmonic Current Emission)
As assessed by the following applications standards:
89/336/EEC Electromagnetic Compatibility
This Product is produced by a manufacturing organization on
ISO9000 level.
Federal Communications Commission (FCC) Notice (U.S. and
Canada Only)
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

17
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
To prevent damage which
may result in fire or shock
hazard, do not expose this
appliance to rain or
excessive moisture.
THIS CLASS B DIGITALAPPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
End-of-Life Disposal
Your new product contains materials that can be recycled and
reused. Specialized companies can recycle your product in order to
reuse components of the product and to minimize waste.

18
Please find out about the local regulations on how to dispose of
your old unit from your local municipality.
(For Customers in Canada and U.S.A)
Dispose of in accordance to local state, provincial, municipal or
federal regulations. For additional information on recycling in the
U.S.A, contact www.eiae.org (Consumer Education Initiative)
Please find out about the local regulations on how to dispose of
your old unit from your local municipality.
Quantaray by Sunpak
Tocad America Inc.
53 Green Pond Road
Rockaway, NJ 07866, USA
www.tocad.com